HT4864 Are these still the correct settings to add iCloud to a kindle fire hd?

I can't get them to work.Error is that it cannot connect to server safely. The info provided doesn't exactly align with the kindle form so I'm thinking I'm putting something in wrong. Can someone pease assist?

Thanks Roger. That's what I used. The kindle form doesn't have a choice for just ssl or tls. It has the following
None
Ssl/tls
Ssl/tls (accept all certificates)
Start tls
Start tls (accept all crest)
Any idea which I choose....options are same for both incoming and outgoing
Thanks

Similar Messages

How do I set my outgoing email up to send mails I've entered the correct settings but still to no avail

Hi there folks I cannot send emails from my phone , I can however receive them, my network provider is eircom I have entered the outgoing mail settings as suggested on the eircom site but still to no avail? any suggestions grealy appreciated, Des,,,,,,,,,,,,,,,,

With an internet connection, receiving email with the correct settings should not be a problem, but sending email can be a problem depending on the internet service provider being used for your internet connection at the time and if the email account provider does not have an authenticated SMTP server.
Most, if not all internet service providers block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection at the time unless the SMTP server is authenticated.

Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV. Any suggestions?

Although all photos in my libraries are rotated to the correct orientation, random pictures still show up in the wrong position when viewed on Apple TV.
Any suggestions?

silvergc
Thanks for your comments
Several of our iPhone users in the UK reported the problem this morning, and as the Apple fan in the office I've got the job of resolving the issue
The original Excel was an old .xls file, but I have saved it as a .xlsx and the problem still appears
I haven't spoken with our developer yet, but I assume he has created the Excel file using some programming tools rather that directly using Excel
In the meantime I have created a simply spreadsheet with 8 cells contain values
In the first 4 cells, I have formatted them using Currency, and have used the currencies USD, DEM, GBP and CHF
In the remaining cells I have formatted them using the Accounting option, using the same currencies
When I review the spreadsheet on the iPhone (or iPad), the first 4 remain the same yet the last four all show the £ symbol
I have now changed the Region Format of the iPhone to United States, and when viewing on the iPhone the bottom 4 values are now all showing the $ sign!
If I had created the spreadsheet I would have put the Currency code in a seperate cell and purely used a numeric format for the number, and there would be no issue. That might be the only solution
Yes, the Director has the full MS Excel app on his Windows 8 device, but I can't expect all of our clients to go and do the same, in business many of them will have the iPhone
We may have to change the way we produce the report because of Apple's failings here, and it's not the first time that we have had to change something because Apple devices can't display them properly
In business, submitting a potential job contract only for the recipient to get the wrong idea of the costs is a major concern

What are the correct settings for the Canon 5D mark II in FCP 7 ?

I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
Jim

Welcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

Which are the correct settings for gmail in MacBookPro

I want to use mac mail to access my gmail. Can I ? instead of going directly to web to access my gmail.? Which are the correct settings for the incoming and outgoing servers ?

Hi,
Yes. You can absolutely access your Gmail account from within either Mail or Microsoft Outlook for Mac. Make sure, that you have enabled POP/IMAP in your Gmail settings, then follow the instructions here: http://mail.google.com/support/bin/answer.py?hl=en&answer=180188 if you wish to access your account via POP3 instead of IMAP, change the incoming mail server to pop.gmail.com
Regards,
Gábor

My new 4s cannot send emails; emails are rejected by server. What are the correct settings?

What are the correct settings when my new 4s can receive but will not send messages. The emails are rejected by the server,

You're going to have to ask your e-mail provider. We don't have the slightest clue who that is, much less what the correct settings would be.

What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

I can not remotely access my Windows Home Server from outside. What are the correct settings for my WRT54GS?

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

HT1277 i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline

i have all the correct settings for my e mail but i can't send for some reason it keeps taking my outgoing server offline can anyone help

If you can receive mail and your connection to your ISP is otherwise working, but cannot send mail, then your SMTP settings are incorrect; the SMTP server port is wrong, your SSL setting is wrong, or the username or password credentials don't match what the ISP has, or your attempted accesses are being blocked or your ISP SMTP server is offline.
And in general, don't use port 25 for your outbound mail, unless your ISP specifically requires that; these days, that port is best left to communications between mail servers and (usually) not used by any mail clients.

'You Are Not Using The Correct Type of Phone Cord' Error

Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.

I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me!

IDVD is producing DVDs which chop the edges off my video. I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped. My TV is definitely on the correct settings. How can I solve this?

iDVD is producing DVDs which chop the edges off my video. I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped. My TV is definitely on the correct settings. How can I solve this?

One way to to put the videos into an iDVD slideshow
and set iDVD's Slideshow preferences to always scale slides to TV Safe Area.
However, some users have reported that the audio quality using this method is lessened. I've not noticed it but then I don't have a good ear when it comes to that sort of thing. If you add more than one video in the same slideshow do not select any transition.
OT

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

COPA Derivation Rules are not assigning the correct values

COPA Derivation Rules are not assigning the correct values when we process billing documents in batch. We currently have derivation rules defined to take the ship to country and refer to custom tables were we identify custom geographic groups (INT/DOM and EAM, AP, etc.). The derivation rules work accurately when the billing documents are created individually, and more than 75% of them are accurate when generated in batch, but in some circumstances, it populates the derived values with the wrong field and we can not identify where or why that's happening. It looks like it may have something to do when the ship to customer number account group is different, but that's not consistent.. Does anyone know how or where these values get populated, or have any ideas why incorrect values are appearing sporadically throughout the billing run? Thanks!!!

Leigh,
Apparently the function module is changing the values for some billing docs. Check one of the following user exits, if it gets triggered and the values are changed:
COPA0001 Enhancement for derivation in Profitability Analysis (CO-PA)
Function Module: EXIT_SAPLKEDRCOPA_001
COPA0002 Enhancement for valuation in Profitability Analysis (CO-PA)
Function Module: EXIT_SAPLKEAB_001
COPA0003 Enhancement for assignment to profitability segment (CO-PA)
Function Module: EXIT_SAPLKEAK_001
COPA0005 Enhancement for actual data update (CO-PA)
Function Module: EXIT_SAPLKEII_001
Function Module: EXIT_SAPLKEII_002
Award suitable points if the above helps. You can also reach me at [email protected]
Thanks
Ajay

My Airdrop Photos are not showing the correct date when I receive them from my Family.

When I recieve photos via Airdrop or Shared Photo Stream they are not in the correct order in my Camera roll. The Dates are off. What is happening here?

You don't need to delete photos from your camera roll to save on backup sizes, you can turn individual items on and off for back up in your iCloud back up settings.
Apple States that the last 3 back ups are accessible, which means the photos from your back up may not be removed immediately.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

My personal ringtones are on my iPhone 5, they are attached to the correct phone numbers and play correctly when I test them on each contact. But when I receive a call instead of the proper ringtone, it plays the generic. What Am I not doing right?

My personal ringtones are on my iPhone 5, they are attached to the correct phone numbers and play correctly when I test them on each contact. But when I receive a call instead of the proper ringtone, it plays the generic. What Am I not doing right?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

I have an iPod 5thGen 30 GB. My tracks on my playlists are rarely in the correct order on the iPod, tho the order is correct when viewed on iTunes.

I have an iPod 5thGen 30 GB. My tracks on my playlists are rarely in the correct order on the iPod, tho the order is correct when viewed on iTunes. Is there anything I can do?

It goes by the Track # field, as seen in on a list in iTunes. So, make sure the Track # field is correctly entered for each song when you review the album on a list in iTunes. Also, make sure the Album field is entered identically for all the songs on the album.
You can edit those fields by doing a Get Info on a song, and going to the Info windows's Info tab,

HT4864 Are these still the correct settings to add iCloud to a kindle fire hd?

Similar Messages

Maybe you are looking for