HT4864 How come when I use the automate iCloud setup, does the incoming mail server have a different address then specified by these instructions?

The IMAP sever that automatically set up is p08-imap.mail.me.com?

So I guess using Apple Token for authenication is OK, instead of the prescibed Name and Password per the http://support.apple.com/kb/HT4864?

Similar Messages

  • HT4864 How do I directly change the incoming mail server for icloud in Mail?  It's grayed out.

    How do I directly change the incoming mail server for icloud in Mail?  It's grayed out.
    I ask this because I have suddenly stopped receiving most e-mails in Mail.  I've found that my incoming mail server (p01-imap.mail.me.com) is different from what the Apple mail setup assistant recommends (mail.me.com), but I cannot change it because it is grayed out.  Any ideas?

    I'm afraid that AFAIK you've gone through the card. You could try Support, though I don't know how helpful they are likely to be.
    To contact  iCloud Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
    http://www.apple.com/support/icloud/contact/
    You will need the serial number of the covered hardware.
    If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee.

  • HT4864 How do I construct the preferences in mail for the incoming mail server?

    I need help in setting up the preferences for mail, especially for the servers.  I followed setting up an account and
    when I encountered the incoming mail server box, it didn't allow keying anything into it.  It is blocked; and with the outgoing server, the choices aren't
    clear.
    Then when I try using mail,  it won't let me send or receive mail saying I can't leave the incoming box empty or that it can't contactr the outgoing server`so I should see iCloud preferences.

    Not unless you know which file in the app sets the choices. I've been through it pretty thoroughly and can't find the one.

  • How come when I use a Internet that I have already used it doesn't automatically connect

    How come when I use an Internet that I have already used it doesn't automatically connect?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • How come when i press the sleep on my MBP it auto shut down?

    How come when i press the sleep on my MBP it auto shut down?

    Pressing the Power Button brings up a dialog: "Restart Sleep Cancel Shut down (default button).
    Teddy Mack; are you just giving the Power Button a light touch, or holding it down?

  • HT4864 When trying to update my Mail Account Mailbox Behaviours settings, when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The "Incoming Mail Server" field cannot be empty. The incoming mail server box has p

    When trying to update my Mail Account Mailbox Behaviours settings, after making the changes when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The “Incoming Mail Server” field cannot be empty. The incoming mail server box has in light grey colour: p02-imap.mail.me.com in it and I cannot edit its content. Any ideas what is going on and how to fix it?

    Hi all,
    Mattreichenbach is probably on the right track here with a reset of settings.  I think I've determined the issue has to do with cached account information and inconsistencies for the account name.  This seems to crop up when I've changed my password and it hasn't propagated fully to all the servers, devices, certificates, etc.
    Hopefully many here are on their way to restoration of service by now but it's clear that a lot of people are having the same issues.  Very frustrating and definitely something Apple needs to resolve:  incoming mail server field grayed out, incorrect autopopulation of different fields, other unanticipated behaviors.  If you're still having issues, though, here's what worked for me...
    First, head to the iCloud preferences pane in System Configuration and choose "Sign Out".  When I did this it prompted me with a number of "are you sure" type questions about retaining information on my local machine.  I chose to delete/remove the info each time simply because it should all be restored by the cloud and I didn't want to risk a massive duplication of my data... I will say, I'm back up and running with no issues so I suspect you can make the same delete/remove choices...  But use your own judgment.  I don't want you to lose any data (ie.. please use care as you do this because I cannot bear the thought of causing anyone to experience the pain of data loss).
    Once you've signed out of iCloud, restart your system.  When you get back in, head to the Mail, Contacts and Calendars section of your System Preferences and add your account back by choosing the brushed aluminum "iCloud" button.  When it asks for your account name, use your @iCloud.com email address.  I am all but certain my issue had started because one of my devices (iPhone or whatever) had been set up with an email alias specified instead of my @iCloud.com address.
    Apple, if you're reading through any of these issues (there are TONS of users having this same problem).  Take note, that your icloud service somewhat frequently is not responding and yet tells the user that the password is wrong and this prompts people to be changing their passwords unnecessarily.  This has happened to me on numerous occasions.  Also, I noticed that last week's outage corresponded to a VERY similar outage exactly one year ago to the day.  Sounds like planned maintenance to me and I think you could do a better job notifying folks so we're not wasting HUGE amounts of time troubleshooting a problem that we have no hope of fixing.
    Hope that helps some of you!
    Terry Mullane
    Washington, DC

  • We use the Apple mail server to get e-mails from our gmail and comcast mail accounts. Recently we have been getting spam that claims to be sent to a gmail address, but when I check that address directly, there is no such e-mail. ???

    We use the Apple mail server to get e-mails from our gmail and comcast mail accounts. Recently we have been getting spam that claims to be sent to a gmail address, but when I check that address directly, there is no such e-mail, either in the inbox or in the spam folder. Is it possible to bypass the gmail account and send directly to the Apple mail server, spoofing the gmail address?

    Maybe some info here for you about spoofing. (and much additional info)
    http://www.thesafemac.com
    Hope this helps

  • HT5361 What is the incoming mail server when setting up a apple email address?

    When setting up a new email account the field for the incoming mail server is greyed out.  How do I add the info?

    It should load that automatically. It varies.
    It will be some variant of imap.mail.me.com. That may get it to look up the correct one.

  • How do I populate the "incoming mail server" field in mail.

    My icloud account is not able to send or recieve emails. Other accounts are. When checking preferences I see the Incoming mail server field is empty and I can not populate it. How can I get round/fix
    this, please?

    Your iCloud email account is automatically set up when you check Mail in System Preferences.
    Go to System Preferences>iCloud, uncheck Mail, restart your Mac, then go back and check Mail again.  This will remove, then automatically set up your iCloud email account again with the proper settings.

  • HT2480 In the server domain; Do I use the smtp server OR the incoming mail server?

    I am trying to verify my business mail on my iphone and I have several troubles thus I would like to ask for you help:
    1) its a "webmail.ath.hcmr.gr" mail, so it is a "Microsoft Exchange" mail type? Correct?
    2) in the server field: what do i add? The incoming mail server or the smtp server?
    Thanks

    Hey Butterworth,
    You may need to use the information in this article to help you troubleshoot the issue with your outgoing server:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • TS4002 How do you re-establish the outgoing mail server (SMTP)?

    I am trying to re-establish my outgoing mail server (smtp).  I can receive mail, but can't send any out.  I have tried all the listed options in the pull-down, but just can't make any of it work.
    Bob

    If you are setting this up on your Mac using Snow Leopard, see http://support.apple.com/kb/HT5330.  The outgoing mail server is smtp.me.com.

  • How do I change the incoming mail server settings in Mac Mail?

    I have a Mac 27" update to Yosemite 10.10.2. I have 25 GB free in storage. I have been having trouble with road runner email and found out today that they are changing their email settings. How do I change the incoming mail server settings in Mac Mail from pop-server.columbus.rr.com to mail.twc.com?

    Replying to yourself doesn't help:
    Reply to the proper person.

  • HT4864 the incoming mail server field is blank and will not let me type in the information. I can type in other fields but this blank field will not allow it.

    In account information the incoming mail server field is blank but when I try to type it in it does not allow me to.
    Whats do I do?

    Welcome to the Apple community.
    You do not need to start adding manual information into your iCloud account settings. If you feel the settings are incorrect for any reason, you should delete your account and add it back and let it set itself up.

  • ICloud asked me to reenter my password to get mail and when I did, it rejected my password. I'm trying to reenter in my account information, but it won't let me because the incoming mail server field is blank, but it won't allow me to enter anything.

    iCloud asked me to reenter my password to get mail and when I did, it rejected my password. I'm trying to reenter in mail account information, but it won't let me because the incoming mail server field is blank, but I can't enter anything into that field.

    No, didn't have to sign out. As I started to, got a messge saying something about losing all my calendar information, which unnerved me so I didn't sign out. It was correcting the password in another email account that corrected the situation for me.

  • HT204053 how do I change the incoming mail server for iCloud?

    How do I change the incoming mail server for iCloud?

    I'm having the same issue.  It says I need to enter one, but the entire box is greyed out, and I cannot select it to manually change it.  I'm so frustrated!!!

Maybe you are looking for

  • Install win 8.1 pro pack

    In the process of Adding Features to Win 8.1 with the Microsoft Win8.1 Pro Pack, I was able to install the Microsoft license key - it accepted it, but the last step in the process fails with this error:  "Something went wrong.  Close this wizard and

  • Why won't my iMac boot from an external drive?

    I have an external drive that has a clone of my other iMac running Mountain Lion made with Super Duper which boots up fine with the machine it's a clone of but will not boot on my new iMac running Yosemite or my MacBook running Snow Leopard. I want t

  • MS Access Update Inner Join command conversion

    I have code in a Microsoft Access Database View, that I'm trying to convert to Oracle. I tried using Oracle SQL Developer's Migration tool and it basically skipped this command. Update Table1 INNER JOIN Table2 On Table1.COL1 = Table2.COL2 SET Table1.

  • Azure Remote App with MSDN Subscription

    Hello , I have an MSDN Subscription with a monthly cap of 50 swiss francs. Reading the RemoteApp licensing details it says: "Yes. For each App Collection there is minimum requirement of 20 users. If you have less than 20 users, you would still be bil

  • Question about LVM

    i have a really quick question about LVM, been trying to search but can't really find the answer here's the scenario i have my new quad core phenom system running arch, with an LVM volume on a few 1TB drives. i was overclocking it the other night and