HT4864 "Note: If you receive errors using SSL, try using TLS instead."
My outgoing mail server works with .me when I enable TLS, but not SSL, any security issues?
Appreciate your reply. Please help me in my further questions.
We were using SSL to connect to their server till now, now they want to upgrade it, so they want us to use TLS1.0
In the link I see that TLS1.0 and others are installed but I do not see them on our server. I will have them install it.
Once we have TLS installed and enabled does Biztalk HTTP adapter use TLS 1.0 as default to connect to external system automatically or do I have to change the HTTP send receive port which has a certificate in it.
Also with which tool can I check if Biztalk is actually using TLS or SSL.
Similar Messages
-
After loading Maverick iTunes will not launch. I get an error code: -45054. I am the administrator and have no groups or guests. Sharing options don't fix this. Also Fetch will not launch, I get error code: SSL error 9807. These worked perfectly before installing Maverick. Also everything that loads, all programs, take twice as long to load. I have MacKeeper and have cleaned and discarded all the garbage.
Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash. -
JCOerror: This system does not let you log on using a password
Hi,
"JCOerror: This system does not let you log on using a password"
This is the error message I get from MII tries to connect to the Production ECC using my credentials to perform a BAPI call.
These credentials work fine interactively (using the SAP GUI) and for BAPI calls from MII on SAP Development instances.
I can interpret this message in two ways:
- My login can not log on using password (though I can interactively)
- The server does not allow logging on using password only. (It might require to pre-authorize the connecting server as well).
I guess my question can be if this error requires adding additional rights to my login for the production environment, or if this is a global SAP setup for this system? Or something else?
In either way, what is required to have this work?
Thanks.Hi,
Kindly try the following options.
Try executing the BAPI seperately in se37, using your login credentials.
Check whether RFC is enabled for the BAPI.
Check whether the SAP server is details are furnished correctly in "SAP Server"(available under "Data Services") editor.
We can ensure this by checking the connection status link in xMII.(Link is available under "Data Services").
If connection status is "Running" then SAP server setting configuration is fine. Else it is not configured properly.
Try executing the BAPI in BLS(Business Logic Services) using JCO connector.
I believe if any one of these scenarios fail then "Proxy Error" might thrown.
Thanks
Rajesh Sivaprakasam -
This system does not let you log on using a password
hi all, i am very new to sap basis. i have changed the below profile parameters in RZ10.
login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
after changing values i restarted the Instance. But the problem is when i am trying to login to the system it is showing an error message : "This system does not let you log on using a password". I know why this error occurs...
but how to resolve this error? plz Help.
Thanks in advancelogin/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
The correct parameter for Min password Lenght is login/min_password_lng.
You can change this at OS level restart and see how it goes...
Regards
Juan -
why can i not send a debat, -error massage - " Please try again later m5" i try to send a crash reports for the Photoshop crashes. Is it to long ?????
Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena -
I have had to replace the hard drive on my iMac running OSX 10.9.3 and reloaded my CS4 Master Collection from Time Machine. I am receiving error message 150:30 saying License has stopped working what should I do?
Unfortunately, you can't install Adobe applications by copying them from a backup, or using the Migration Assistant on a Mac. There are too many support files scattered throughout your drive which aren't moved to the correct location.
First, you'll have to use Adobe's Cleaner Tool to remove all of the stuff you copied:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then reinstall CS4 Master Collection from your original discs, or a backup of the downloaded files. If you don't have either, you can download Creative Suite from this link:
Other downloads -
"Not enough disk space" error using Burn
I'm using a brand new Macbook Pro and trying to burn a 60-minute CD (.wav files) using the Burn app. but it keeps telling me there's not enough disk space when i have over 220 GB. can anyone help fix this or point me to a Burn guide? i couldn't seem to find one. thank you for your time!
-MikeHi PGVPGV,
It is not altogether clear to me which process you are following here.
To duplicate a CD using Disk Utility's "Burn" process:
1) Open Disk Utility, insert the CD or DVD disc in the optical drive, and select it in the list at the left.
2) Choose File > New > “Disk Image from {disc name}.”
3) Type a name for the disk image.
4) Choose “compressed” or “read-only” from the Image Format pop-up menu.
5) Choose “compressed” to create a smaller disk image. Choose “read-only” to create a disk image that’s quicker to create and open.
6)Click Save.
7) After Disk Utility creates the disk image, eject the original CD or DVD.
8) Select the disk image in the list at the left, and choose Images > Burn.
9) When the Burn Disc dialog appears, insert a blank CD or DVD, and then click Burn.
(The above is pretty much straight from the Disk Utility Help files)
It sounds to me as if you may be using an incorrect disk image format at the image creation stage.
Just to be clear, too, is this an audio CD that you are trying to copy , or a data CD full of Wav files?
Cheers
Rod
Message was edited by: Rod Hagen -
Web Intelligence in edit window i receive error when i try to save as excel
When I edit Web Intelligence report and want to save it as excel/pdf or CSV I receive error u201CWeb Intelligence Servlet error: Get%3ANoWebIServerfoundforthissessionIDu201D
Address that I receive from application is
"https://wpr06.tp.gk.corp.tepenet/AnalyticalReporting/Webi/cdzServlet?getBlob&BlobID=TMP253&SessionID=wpr05:6400@6536561JLelNym3xRUY0FYn6536560J4ghiQpa9dS6ZB5z&CdzSession=wpr05:6400@6536561JLelNym3xRUY0FYn6536560J4ghiQpa9dS6ZB5z,WPR02.Serwer%20raportĂłw%20Web%20Intelligence%2001,AeDiT.66gWxKnz6L2YV_0pA,wpr05:6400,@WPRBIS,osca:iiop://wpr05:6400;SI_SESSIONID=6536560J4ghiQpa9dS6ZB5z&DocumentToken=&SessionID=wpr05:6400@6536561JLelNym3xRUY0FYn6536560J4ghiQpa9dS6ZB5z&CdzSession=wpr05:6400@6536561JLelNym3xRUY0FYn6536560J4ghiQpa9dS6ZB5z,WPR02.Serwer%20raportĂłw%20Web%20Intelligence%2001,AeDiT.66gWxKnz6L2YV_0pA,wpr05:6400,@WPRBIS,osca:iiop://wpr05:6400;SI_SESSIONID=6536560J4ghiQpa9dS6ZB5z&DocumentName=Pozyskanie.xls"
If I change https to http I receive file. Or Business Object server have set ssl in Tomcat but we havenu2019t got set ssl in business object cms server. We want only to have ssl communication on our page but not in fat client Desktop Intelligence.
The same function but not in edit windows work properly.
We got Business Object R3.1 SP2.07SSL just on Tomcat (Client Browser to Tomcat implementation) should work with no problems with Java Report Panel. No SSL for CORBA communications between BOE servers needed.
There must be some config issue - I think it'll be easier to find out and fix this if you open a support ticket. -
I receive error when I try to insert Image to Oracle Database v.9i
My Error is :
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], [], [], []
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:542)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1311)
at oracle.jdbc.ttc7TTC7Protocol.fetch(TTC7Protocol.java:797)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:1608)
at oracle.jdbc.driver.OracleStatement.doExecute(OracleStatement..java:1758)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1805)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:410)
and my code is:
URL url = null;
InputStream in = null;
Statement stmt = null;
OutputStream out = null;
try {
url = new URL("file://D:/MyJava~1/classes/javalogo.gif");
in = url.openStream();
stmt = con.createStatement();
// Create the table
stmt.execute ("create table ImageTable (count varchar2(20), image BLOB)");
System.out.println("Table created ...");
// create a blob entry in the table
stmt.execute("insert into ImageTable values ('two', empty_blob())");
stmt.execute("commit");
String cmd = "select image from ImageTable for update";
/* error this command/*
ResultSet rset = stmt.executeQuery(cmd);
System.out.println("Success execute command.");
while (rset.next()) {
//get the Blob locator
blob = ((OracleResultSet)rset).getBLOB(1);
System.out.println("Get the BLOB locator");
//get ready to accept binary file
out = blob.getBinaryOutputStream();
int chunk = blob.getChunkSize();
System.out.print("The chunk size is " + chunk);
byte buffer[]= new byte[chunk];
int length;
while ((length = in.read(buffer)) != -1) {
out.write(buffer, 0, length); //image file saved.
con.close();
out.close();
stmt.close();
thank you for your kind
You should try using PreparedStatement instead of Statement while inserting the image - one of the methods like setBytes(. .), setBlob() or setBinaryStatement() of the PreparedStatement should do the trick..
The setBytes( ) is inefficient in terms of memory -esp for large images -better is to use setBinaryStream( ).
Shantanu -
Use TLS instead of SSL in Oracle AS WebCache 10g (10.1.2)
Hi,
We use Oracle AS Webcache as a reverse proxy for all our OAS/ADF web applications.
Our sysadmin blocked SSL v3 icw POODLE vulnerability. Is there any way we can use TLS (1.2) instead of SSL in the Oracle Webcache 10g?
Many thanks,
AbrahamWe are having the same issue on production environment.
Since Thursday 20th november 2014, Google Chrome does not allow connections to websites using SSLv3. This is because the POODLE vulnerability as described here: https://www.us-cert.gov/ncas/alerts/TA14-290A
I've already followed the configuration on My Oracle Support (Doc ID 1936300.1) without success. But i didn't applied the Critical Patchs Updates yet as the presented note Doc ID 405972.1.
I'm wondering if you found any workarround for this problem or if we can help each other. I believe we are not alone.
Thanks,
Jeison. -
Could not send or receive emails using zimbra connector interface
I have installed Oracle beehive 1.4.0 and am trying to configure it for email services. After installing Oracle Database,Beehive, Beehive zimbra connector, Beekeeper what else do i need to do ? Is there any configuration that i need to update before i can use email service.
In the control panel it show email service is up and running.
If i try to send email i get this error:
msg - system failure null
code - service.FAILURE
method - ZmCsfeCommand.prototype.invoke
detail - soap:Receiver
What does this mean ?
-RohitI am not sure if record management service has anything to with this but thats the only service down on my system so i was wondering what is wrong there.
How do i get to know the email address of user ? I am assuming username@my_beehive_server will be its email address. (in my setup oracle, beehive,beekeeper,zimbra everything is on same testbox which has got 4 gb of memory). Is there anything else which i need to do to add email address for a user. I tried sending email to same user which also fails for same reason. Worst part is even save as draft fails. So i am not sure if this with smtp/imap settings.
I have not setup thunderbird or any other email client.
What all things i need to check to make sure my email service config is correct.
-Rohit -
Scan to Email not working - Invalid Credentials error (using gmail and 2-factor authentication)
I configured the HP OfficeJet 8600 printer for scan to email using the Embedded Web Server interface. In the Web interface, I added/entered an email address for my gmail account, and set the correct SMTP server details, and entered 465 for the port number. I checked the "Always use secure connection" box, as well as the "SMTP requires authentication for outgoing email messages" box. I entered correct SMTP user ID and password. Yet when I did a test, I got an error "Invalid credentials" After a lot of frustration, and trying all sorts of things, I eventually got the idea to try another email account. This time I tried a different email account, a netzero email account, configured the smtp server details for it etc. And this time when I tested the netzero email address it worked. I tried the scan to email on the printer, and it worked for the Netzero email account. it just didnt work for the gmail account. I had a while back turned on 2-factor authentication. I went to gmail settings and requested an "App password" for my HP printer. Google/gmail displayed a 16 character password, which I then entered into the password box in the HP OfficeJet printer Embedded Web Server interface (instead of my usual password), for the gmail account. And this time when I tested the email account - it worked! Problem solved! .. I share this just in case anyone else is having the same problem I had, and is going through the same frustrating experience I endured!
Thank you. This helped TREMENDOUSLY!
-
Receiving ERRORS using WEBLOGIC.DEPLOY
Hi everybody,
I am getting strange errors when using the weblogic.deploy command-line
function. I am using WL6.0 on W2000.
Deploy/Update
command: java weblogic.deploy -port 7001 -host localhost update
beapasword MyWebApplication stage\MyWebApplication.war
error: java.lang.NullPointerException
at
weblogic.deploy.deployApplication(deploy.java:383)
at weblogic.deploy.deploy(deploy.java:340)
at weblogic.deploy.runBody(deploy.java:219)
at weblogic.utils.compiler.Tool.run(Tool.java:81)
at weblogic.deploy.main(deploy.java:954)
Undeploy
Command: java weblogic.deploy -port 7001 -host localhost undeploy
beapasword MyWebApplication
error: giving up after two minutes
And it looks that just a Update doens't work. I have to undeploy first and
the do a update to see the changes I've made in my file.
Any suggestions....
M-Hi.
WLS version and service pack level? Please post the entire weblogic.deploy command along
with the exception that follows.
Thanks,
Michael
Harjeet Singh wrote:
I try to use weblogic.deploy to deploy my EAR file on weblogic server called localhost
on 7001. When I try to run it gives me following error:
[java] JNDI naming exception: Naming exception trying to connect to: t3://localhost:7001
as: system: password
system password is correct. I have tried http://localhost:7001 to but doesen't seem
to work.
Any ideas.
HS--
Michael Young
Developer Relations Engineer
BEA Support -
How to Resolve Can not Display Web part error using CQWP and a blog
I have a SharePoint 2010 site with a home page that has a CQWP (content Query Web Part) tied to the most recent blog of blog site with a list of blogs. Randomly, some clients will experience a "Unable to display
a web part". Our client machines are set up with Roaming profiles that are PKI enabled. Some users are always able to see the resulting blog on the home page, while other users, experience sporadic ability to see the blog ----getting a
"Unable to display web part". Also a client can be on one machine and get the error and then log on to another machine and not get the error. Its also seems that when a new blog is added to the blog list this is when the
ability to see the blog on the home page may come up as an error. Our setup is simple: show items= list/posts, List type=Posts, Content Type Group= List Content Type, Content type=Posts, no audience targeting, not additonal filters,
group items by = None Descending, #columns =1, sort items by =published -descending Limit # display items = 1, Gropup style = Default, itemstyle= image on left, yes play media links, Fields to display = titlt
and Description (body)
What kind of things could cause the random behavior?Hi,
According to your description, my understanding is that the error occurred occasionally with the Content Query web part.
I tested the same scenario in my environment, and the web part worked fine.
I recommend to verify the things below:
Did this issue occur with all the Content Query web part? I recommend to create a new Content Query web part to see if the issue still occurs.
Did this issue occur with all the users who have permission to view the web part?
Deactivate the Publish feature and then re-activate it to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Errors using dbms_scheduler instead of dbms_job
Hello,
I'm looking for some help using the dbms_scheduler in Oracle 10g. Up until recently, we have been happily submitting jobs in Oracle using the dbms_job.submit() command without problems. Due to this now becoming deprecated in release 10g and beyond we are looking to make use of the new dbms_scheduler.create_job() functionality. However, when trying to convert from dbms_job to dbms_scheduler, I keep getting errors when trying to run the stored procedure. I'm sure I must be missing something obvious but I just cannot put my finger on it at present.
The set up using dbms_job is as follows:
We have a procedure (called PRODCEURE_A) that is called directly from our code and included in the procedure is a call to dbms_job that submit a job to run PROCEDURE_C which in turn calls a PROCEDURE_B. For example PRODCEURE_A is created as follows:
create or replace procedure PRODCEURE_A AS
jobnum number;
row_count number;
current_value_date DATE;
snapshot_id Number;
BEGIN
row_count :=0;
BEGIN
/* Fetch current value date and snapshot number */
SELECT COL_A, (COL_A- COL_B)
INTO current_value_date, snapshot_id
FROM TABLE_A
WHERE COL_C= 0;
/* delete records from TABLE_A table that are older than 40 days */
DELETE TABLE_A WHERE COL_A < current_value_date - 40;
/* ensure that are no records in TABLE_A for the current settlement date */
select count(*) into row_count
from TABLE_A
where COL_A = current_value_date;
/* Insert all the Date snapshot jobs into TABLE_Awith initial status as NS */
if row_count < 1 then
Begin
insert into TABLE_A values (1, 'PROCEDURE_B', current_value_date, NULL, NULL, 'NS', NULL);
/* Submit the oracle job spst_execute_date_snapshot to run asynchronously */
dbms_job.submit(jobnum, 'PROCEDURE_C ('||''''||current_value_date||''''||', ' || snapshot_id || ');');
End;
END IF;
END;
END;
This works without problems. A job is created and PROCEDURE_C is duly executed. I attempt to change dbms_job to dbms_scheduler as below:
create or replace procedure PRODCEURE_A AS
jobnum number;
row_count number;
current_value_date DATE;
snapshot_id Number;
BEGIN
row_count :=0;
BEGIN
/* Fetch current value date and snapshot number */
SELECT COL_A, (COL_A- COL_B)
INTO current_value_date, snapshot_id
FROM TABLE_A
WHERE COL_C= 0;
/* delete records from TABLE_A table that are older than 40 days */
DELETE TABLE_A WHERE COL_A < current_value_date - 40;
/* ensure that are no records in TABLE_A for the current settlement date */
select count(*) into row_count
from TABLE_A
where COL_A = current_value_date;
/* Insert all the Date snapshot jobs into TABLE_A with initial status as NS */
if row_count < 1 then
Begin
insert into TABLE_A values (1, 'PRODCEURE_B', current_value_date, NULL, NULL, 'NS', NULL);
/* Submit the oracle job spst_execute_date_snapshot to run asynchronously */
dbms_scheduler.create_job(
job_name => '"JOB_NAME"',
job_type => 'STORED_PROCEDURE',
job_action => 'PRODCEURE_C('||''''||current_value_date||''''||', ' || snapshot_id || ');',
enabled => TRUE);
End;
END IF;
END;
END;
However, when trying the above I get the following error:
ORA-27452: PROCEDURE_C('22-JUL-09', 2494); is an invalid name for a database object
When I attempt to change job_type from 'STORED_PROCEDURE' to PLSQL_BLOCK as follows:
create or replace procedure PRODCEURE_A AS
jobnum number;
row_count number;
current_value_date DATE;
snapshot_id Number;
BEGIN
row_count :=0;
BEGIN
/* Fetch current value date and snapshot number */
SELECT COL_A, (COL_A- COL_B)
INTO current_value_date, snapshot_id
FROM TABLE_A
WHERE COL_C= 0;
/* delete records from TABLE_A table that are older than 40 days */
DELETE TABLE_A WHERE COL_A < current_value_date - 40;
/* ensure that are no records in TABLE_A for the current settlement date */
select count(*) into row_count
from TABLE_A
where COL_A = current_value_date;
/* Insert all the Date snapshot jobs into TABLE_A with initial status as NS */
if row_count < 1 then
Begin
insert into TABLE_A values (1, 'PRODCEURE_B', current_value_date, NULL, NULL, 'NS', NULL);
/* Submit the oracle job spst_execute_date_snapshot to run asynchronously */
dbms_scheduler.create_job(
job_name => '"JOB_NAME"',
job_type => PLSQL_BLOCK',
job_action => 'BEGIN PRODCEURE_C('||''''||current_value_date||''''||', ' || snapshot_id || '); END;',
enabled => TRUE);
End;
END IF;
END;
END;
This gives the following error:
ORA-02089: COMMIT is not allowed in a subordinate session
I'm stumped by both of these errors. Firstly, why should I get an error reported that the PROCEDURE_C is an invalid name? It lives in the user's schema that is running PROCEDURE_A (and so submitting the scheduled job?)
Secondly, why the COMMIT error when running as a PLSQL_BLOCK? I can't see any commit is used within the procedure itself.
Any help would be welcomed. If more info required, please let me know.
Thank you.One question.
Are you aware that DBMS_SCHEDULER will do a commit for you?
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:25405608521707
umm, dbms_job does not commit.
A job when run will have it's transaction ended. That is expoected, normal, correct.
But when you CALL dbms_job - to submit a job - dbms_job.submit DOES NOT COMMIT.
So, no, dbms_job does not commit.
So that would break your existing transaction (if you replaced dbms_job with dbms_scheduler). If you're ok with that then your issue is still pertinent, if not, then it's obviated by you not being able to use dbms_scheduler :D)
Maybe you are looking for
-
I thought that by using the Tools function - Page Info, that this would give the information. It does not. What do I need to do?
-
Change Layout for Document Access Right
Dear SAP B1 dev. team and management, I have read the LICENSE COMPARISON CHART in the following link: https://websmp206.sap-ag.de/~sapidb/011000358700000953982007E I find that there is a confusing functionality in the sales A/R. It is change layout f
-
Power consumption in Connected Standby Mode too high with no obvious cause even in airplane mode
My Windows 8.1 tablet is draining at a rate of about 3% per hour or 833mW drain while in connected standby mode. I have muted the sound and set the system to airplane mode, but still receive 3% drain per hour. The PEP PRE-VETO rate and COUNT are 0. T
-
I am setting up project organisation hierarchies in release 11. Basicaly i have expenditure organisations which correspond with sets of books (operating unit = legal entity = SOB.)It is multi-national so I need one SOB per country. In terms of projec
-
9360 keeps rebooting 2 days now. I really need help!!
My 9360 keeps on rebooting. I did the battery pull, press back button till reboot is done but it doesnt work. I also connected it to my pc to "update" as a previous person was advised but the 9360 is still rebooting. Can anybody please help me? Perha