HT4889 an error occurred while preparing your information for transfer
While trying to use Migration Assistant, my PC gets the following error "an error has occurred while preparing your information for transfer". I have tried reloading program, usuing an erthernet connection and my wireless connection. My Bookmarks, Contacts and Calendar were transferred, but what about documents, pictures, etc?
To find out what is causing the Migration Assistant to fail, you can check the SystemMigration log located in - C:\Users\[user name]\AppData\Local\Temp\SystemMigration
Similar Messages
-
When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?
Restart both computers then try again.
Switch Basics: Migrate your Windows files to your Mac -
When I try using Migration Assistant an error appears on my pc... "An error occurred while preparing your information for transfer." My mac just continues searching for the pc and yet both are on the same wifi. I'm not getting anywhere! Please help!!!
Simple...
http://www.apple.com/uk/support/mac/app-store/contact/ -
Windows migration assistant gives error " An error occurred while preparing your information for transfer " Please suggest how to proceed . Many Thanks .
To find out what is causing the Migration Assistant to fail, you can check the SystemMigration log located in - C:\Users\[user name]\AppData\Local\Temp\SystemMigration
-
HT4796 error occurred while preparing your information for transfer
Downloaded Migration assistant on to my PC and when I open it I get "error occurred while preparing your information for transfer"
I want to copy my email addresses etc. to my Macbook Pro.To find out what is causing the Migration Assistant to fail, you can check the SystemMigration log located in - C:\Users\[user name]\AppData\Local\Temp\SystemMigration
-
HT4796 an error occurred while preparing your information to transfer
Everytime I use the migration assitant I always get error occured and I have an ethernet cable connecting the 2 computers. 1 computer is a windows 7 system and the other is a mac OSX 10.8.3 so how do I transfer my files?
Do you have file sharing turned on on the Windows machine? I'd also recommend using Pondini's Migration Assitant link. You can find it at:
http://pondini.org/OSX/MigrateLion.html -
HT4796 An error occured while preparing information to transfer
Im receiving the following message when trying to transfer data from PC to MAC
An error occurred while preparing your information to transferWhat type of data files are you trying to transfer from the PC and what are their file extensions? It's possible they are not compatible with OS X.
Hope this helps -
An error occurred while preparing the installation. Try running the application again
I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA PROJECT:InstallAssistant-476.8
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
*****This is where the timer starts saying “”About a minute remaining”*****
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
"Kernel Cache" = "/.IABootFiles/kernelcache";
"Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ****** Path: /Volumes/Install OS X Mavericks
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ****** Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
Thanks in advance!Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
First, my specs
Secondly, I am running an aftermarket 500 GB drive.
Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
And finally, here is the seeminly unavoidable error message.
Also, other things I've tried now are
installing it from the "show package contents area",
mounting said DMG and trying to install from there.
installing a package file called "upgradeos.pkg"
no luck. -
What does "Error 10" mean? "An error occurred while loading your project. 10"
Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digiThanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet. -
Hello,
I developed one simple provider hosted app and I published it in my Azure website. I also published the SharePoint App of this solution in O365 site. I'm using Visual Studio 2013 Premium edition. I've followed all the steps to do this work e.g.
generate the client ID and client secret through my O365 site and updated the AppManifest.xml as well as web.config etc. In my AppWeb project, I've TokenHelper.cs and SharePoint.cs classes.
When I'm clicking the app from my O365 site, I get the following error "An error occurred while processing your request" which is due to the following code:
protected void Page_PreInit(object sender, EventArgs e)
Uri redirectUrl;
switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
case RedirectionStatus.Ok:
return;
case RedirectionStatus.ShouldRedirect:
Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
break;
case RedirectionStatus.CanNotRedirect:
Response.Write("An error occurred while processing your request.");
Response.End();
break;
It's always executing the case RedirectionStatus.CanNotRedirect. Why?
I've checked the method "CheckRedirectionStatus" of SharePointContext.cs class completely and I am not understanding why am I getting this error.
When I browse my Azure website http://sitename.azurewebsites.net, even there I'm getting this error. I believe that error is because there is no query string parameter there e.g. SPHostURL etc.
Please let me know why I'm having this redirection error.
Thanks,
AshishHi,
For a better troubleshooting,
I suggest you do as the following:
Debug the code step by step to find the reason of the issue.
For the remote debug your app from Windows Azure, you need to download Azure SDK:
http://azure.microsoft.com/en-us/downloads/
After installing the SDK, it will have “Attach Debugger” for Azure web site, you
also need to set "Attach Debugger" to on in the Windows Azure Management Portal
More detailed information about how to debug provider-hosted app:
http://blogs.technet.com/b/speschka/archive/2013/11/25/debugging-sharepoint-apps-that-are-hosted-in-windows-azure-web-sites.aspx
Best regards,
ZhengyuGuo
Forum Support
Please remember to mark the replies as answers if they help and unmark them if
they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support -
ERROR: TF246021: An error occurred while processing your request.
Since last week the CI build on our integration branch fails when setting the label for the branch, I tried to create a new (default) build definition, which fails with the same error. Any other branch can build successful. We get the following error:
Exception Message: TF246021: An error occurred while processing your request.
Technical information (for administrator):
SQL Server Error: 2601 (type VersionControlException)
Exception Stack Trace:
Server stack trace:
at Microsoft.TeamFoundation.Client.Channels.TfsHttpClientBase.HandleReply(TfsClientOperation operation, TfsMessage message, Object[]& outputs)
at Microsoft.TeamFoundation.VersionControl.Client.Repository5.LabelItem(String workspaceName, String workspaceOwner, VersionControlLabel label, LabelItemSpec[] labelSpecs, LabelChildOption children, Int32 maxClientPathLength, Failure[]& failures)
at Microsoft.TeamFoundation.VersionControl.Client.WebServiceLayer.LabelItem(String workspaceName, String workspaceOwner, VersionControlLabel label, LabelItemSpec[] labelSpecs, LabelChildOption children, Failure[]& failures)
at Microsoft.TeamFoundation.VersionControl.Client.VersionControlServer.CreateLabel(VersionControlLabel label, LabelItemSpec[] itemSpecs, LabelChildOption options, Failure[]& failures)
at Microsoft.TeamFoundation.Build.Workflow.Activities.TfLabel.TfLabelInternal.RunCommand(VersionControlScope versionControlScope, String nonFatalError, VersionControlLabel label, IEnumerable`1 items, LabelChildOption childOption)
at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
at System.Func`6.EndInvoke(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.TfLabel.TfLabelInternal.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity`1.System.Activities.IAsyncCodeActivity.FinishExecution(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: TF246021: An error occurred while processing your request.
Technical information (for administrator):
SQL Server Error: 2601 (type SoapException)SoapException Details: <soap:Detail xmlns:soap="http://www.w3.org/2003/05/soap-envelope" />
Exception Stack Trace:
When I manually create a Label on the branch it works fine, please advice?
additional information:
By changing "Label sources" to false the build does complete. Does SQL Server Error: 2601 indicate a duplicate key error in the TFS database?
(Cannot insert duplicate key row in object '%.*ls' with unique index '%.*ls'.)
see also: https://technet.microsoft.com/en-us/library/aa258747(v=sql.80).aspxHi,
For this issue, you can check if you can connect to TFS and perform operations on other client machines. If yes, the problem related to your environment.
You can also delete the current workspace and cretea a new one, then do a workspace mapping. To delete the workspace, use tf workspace or delete it via Team Explorer. If the problem still exist, please let us know your environment, settings etc. for further
investigation.
Best regards, -
Hi,
I am using an administrator account to change the permission setting in the c:\ drive of my w2k8 x64 server.
Every time I try edit a permission (read, write, read & execute..... anything), I got a whole wack of paremeter errors (this happen to all account i used):
First, I would get the message
An error occurred while applying security information to: c:\boot
and I click continue, a new message would appares say
An error occurred while applying security information to: c:\bootmgr, and so on, until c:\windows.
I tried to turn off/on UAC but this doesn't help.
I need your help on soving this problem.
ThanksDisclaimer: You should not follow any of these instructions. They will cause you harm in every conceivable way. Don’t continue I say again … go read a book, see a movie, hit the gym, spend time with family and friends but by all means don’t read any further and certainly don’t follow any of these instructions.
Windows 7
Are you getting these errors?
“an error occurred while applying security information to: “filename”
“access is denied”
“you currently don’t have access to this folder”
File Folder Lock On Lock Off Icon
Note: you may want to create a “test folder” and test these instructions so you can get familiar with them. Also if you have lots of folders, subfolders and files your computer may take awhile to make all the changes. Just sit back and relax while it crunches away ;-)
If you are going to want access to all your folders and files start with the topmost folder as we will be making a selection that will apply the setting to all subfolders and files. Ill point this out when we get to it later. You may only want to do this to files that you use directly and not mess with system files etc. These instructions can help you with files already on your system or files that you are bringing in from an external drive or other source.
Here we go!
First we will be taking “ownership” of your files and folders (instructions 1-18) then we will be granting you the proper “permissions” (instructions 19-) ; these are two key principles you need to be aware of to properly manage your files. The good new is that once you make these changes they will persist and then you will be your local file guru!
Instructions:
TAKING OWNERSHIP (1-18):
1) Turn on your computer and log into windows with administrator privileges. If you are the only user of your computer then chances are the normal account you log in with has these privileges. If someone else set your computer up for you they may have the administrator privileges and you should check with them.
2) Right click on your top most folder and select properties.
3) Select the security tab at the top.
4) Don’t answer any questions that pop up just click the “advanced button” on the bottom right.
5) Click the owner tab.
6) Now click edit.
7) Then click on “you”, that is, the account that you just logged into your computer with, also known as your “username”.
8) Check the box “replace owner on subcontainers and objects”. I promised to point this out earlier. If you don’t check this box then any changes you make WON’T apply to the subfolders and files.
9) Click apply.
10) A dialog box should pop up with a message “You do not have…”
11) you should select “yes”
12) Another dialog box should pop up with a message “If you have just taken ownership …”
13) Select “OK”
14) Click “OK” again to close the “advanced security settings” screen were making changes to.
15) The next box should now show you as the current owner
16) Click “OK”
17) Click “OK” again to close the properties tab
18) We are now back at your folder listing. Congratulations! You are now the proud owner of your files! Take good care of them
SETTING PERMISSIONS
19) OK, now let’s get started setting your permissions. Right click your topmost folder again and select properties.
20) Select the security tab at the top.
21) OPTIONAL: You will likely see a list of “group or user names” that have various permissions. You don’t need to make any changes to these. If you want to remove some then click edit, highlight a “group or user” and hit remove.
22) If you are not already listed we need to add “you” to the list, again by “you” I mean the name of the account that you logged into your computer with to start this session when you logged into windows, in other words your “username”. Click “add” then type JUST your username that comes up when you first log in to your computer by entering your username and password. You shouldn’t’ include any pathnames JUST the username.
23) Click on “check names”; windows should find you.
24) Click “OK”.
25) Now you should be back at the “Permission/security” box
26) Check the “full control” box under “allow”. Scroll down and you will see you can do everything now. Hey, stop obsessing …the “special permissions” tab is OK unchecked… It is there if you were to want to fine tune. You took full control already what else do you want You are behind the driver’s wheel my friend, enjoy!
27) Select “apply”.
28) Select “OK”
29) Select “OK”
30) OPTIONAL (THE little LOCK): did a “lock” appear. It might have if you removed all other “group or user names” back in step 21. The lock just means that YOU alone have access to these files. It is not bad in fact it is an easy way to see that the folder is unshared in every way. If you want to experiment with the “lock” try this: Right click the folder again but this time DON’T select properties instead a little higher up on the list select “share with”: see the lock by “nobody”. You aren’t sharing with anybody and so there is a lock to signify that. To experiment you can click “specific people” type “guest” click “add” then click to highlight the new “guest row” leave the “read” box checked and click “share”. You are now sharing those folders or files with “YOU” and anyone that logs onto your machine as a “Guest” and the lock has disappeared. To bring the lock back: right click the folder, click “share”, click “nobody”. LOCK ON / LOCK OFF …hey your Kung Fu is pretty good! For further experimenting with the lock try this but first a security warning: (SECURITY WARNING: changing these sharing settings may share your files with anyone going through your router/homegroup. This may compromise your security. Always protect access to your wireless router by using passwords to get onto the wireless network and also setting router passwords to prevent access to the router itself). If you set up a “homegroup” on your network and select this choice the “lock” will disappear and your files can now be shared with anyone logged into your network.
• There could be multiple reasons for “access denied errors”. A nasty one is that the file/pathname is too long (>260 characters in Windows 7). You should start to shorten the root folder names as much as possible and bring down the longest path name to well under 260 characters (also including into that calculation the path where you will be copying the files).
Enjoy!
George
This is a draft document; please send me an email to let me know how it went for you and to help improve the document.
[email protected] -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Error: An error occurred while preparing the query in openquery on ServiceNow ODBC Link Server
Hi Team,
Greetings of the Day!!!!!
I have a created a link server on SQL Server 2008 R2 databse of Service Now ODBC driver. And written a stored procedure using openquery to get the data from link server.
Now problem is that, when i have scheduled that stored procedure in sql jobs. When this job runs automatically then we are getting below error while when i start the job mannually then it's not giving error.
An error occurred while preparing the query "..........."
Please help me to resolve this issue.
Regards,
Brijendra PandeyHi Fanny,
I had reviewed the job history. I am getting below message where as table is exist in the database.
Message
Executed as user: NT AUTHORITY\SYSTEM. OLE DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:incident not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE
DB provider "MSDASQL" for linked server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:sysapproval_approver not found.[10129]". [SQLSTATE 01000] (Message 7412) OLE DB provider "MSDASQL" for linked
server "SNOWDSN" returned message "[DataDirect][ODBC OpenAccess SDK driver][OpenAccess SDK SQL Engine]Base table:problem not found.[10129]". [SQLSTATE 01000] (Message 7412). The step succeeded.
Regards,
Brijendra Pandey -
I am trying to order a book with iphoto, I keep getting the same error message.
" A network error occurred while processing your order, please check your network connection and try again"
I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
I have ordered two books a few months ago without any problems.
Now I keep getting the same message either half way into
the order or at the final hurdle after the images have been uploaded.
Any ideas?
My shared Network has been fine and that does'nt seem an issue.
Help.Try again in a couple of hours - sometimes it is a temp condition
LN
Maybe you are looking for
-
When I click on things that need to open a pop up nothing happens
All of a sudden when I click on part of a page that would open a small window for details or info, or like when I'm printing postage in PayPal and a new window should open with the label on it, nothing happens. My popup blocker is off. I uninstalled
-
Encore installation for Adobe Premiere Pro CC 2014
How to install encore. Please I need link download and the way to activate with cloud.
-
Grt release status on backend to SC on SRM
Dear all, We would like to see the process Release Status of Purchase requisition or Purchase order on backend system R/3 , in the Shopping Cart on SRM side. Does SRM 5 Support this issue? Does anybody has implement this case? Best Regards, Moshe
-
Could not load desktop and screensaver preferences pane
That is the message that I have been getting when I try to load this pane (and only this pane). This has been going on ever since I tried to change my desktop photo a couple of days ago. The desktop is now a blank blue, showing neither the old photo
-
ISA : The user has no authorization
Hello Friends, I created a customer configuration " MYCONF" under http://host:50100/shopadmin/admin/xcm/init.do and then i tried to connect to : http://host:50100/shopadmin/shopadmin/init.do?scenario.xcm=MYCONF i was directed to login page . i enter