HT4889 Can I use Migration Assistant to update iTunes (only) from my optical drive Mount Lion computer to my Maverick OS computer?

Already migrated my data, settings, etc. to the new Maverick OS iMac. Then realized I had lots of CDs that I hadn't burned into iTunes, which I can do only on my old Mountain Lion iMac. Can I just choose "Data" if I invoke Migration Assistant? Will it move only the new stuff, which would be the new iTune playlist library? Don't want to reload the entire computer again!

What you should be able to do is simply copy everything that's in the home folder under iTunes from the old computer to the same spot on the new one - just drag and drop. That should bring over all your music & your playlists. You shouldn't have to use Migration Assistant for that.
I did that during one of my many moves from one computer to another, but I have not tried recently. It won't hurt to give it a try.
~Lyssa

Similar Messages

Attempting to use Migration Assistant to restore a Time Capsule backup to a mounted partitioned drive?

Had a power surge and my Mac Pro did not fare well. Was able to boot from one of the drives in read only mode, so I did a Time Capsule backup of everything on the drive. Reinstalled Mountain Lion. Booted the computer up and am trying to use Migration Assistant to take the Time Capsule backup and restore it to the 1TB drive. When I use Migration Assistant, it says that there is not enough space on the drive to do the restore. I looked in Disk Utility and saw that the start up disk is another one of the 1TB drives with about 600GB used, therefore not enough space to do the restore. I want to restore to the original drive, but it says it is a "Mounted Partitioned Drive". Can I use Migration Assistant to restore a Time Capsule backup to this mounted partitioned drive?
Thanks in advance for any help - greatly appreciated.

I am not sure, never had to go there, I have multiple bootable clones of the system online and off, and a couple 1500VA/900W UPS units powering everything.
http://support.apple.com/kb/HT1427
http://www.recovermymac.co.uk/data-recovery/time-capsule-data-recovery/
This is a great article:
http://pondini.org/OSX/SetupLion.html
Most questions about TimeCapsule and TimeMachine are under Mac OS X forum as in -
https://discussions.apple.com/community/mac_os/os_x_mountain_lion#/?tagSet=1468

Can I use migration assistant from a mac with leopard to a mac with tiger?

My old mac was upgraded to leopard, (don't ask me why), and I just got a new mac with tiger, although I ordered leopard up to date. Can I use migration assistant to move stuff from the old mac with leopard to the new mac with tiger, or do I have to wait until I get the copy of leopard? Plus, if I move files over now- like through email and/or network connection, and then when I get leopard and archive and install, what happens to my files?

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

Can I use Migration Assistant as a tool to move my iphoto library back and forth from my imac to my MacBook Pro?

I purchased a macbook pro so I can work on my iphoto projects when out of the house. Instead of buying an external and having my iphoto library on that, would I be able to use Migration Assistant to update the iphoto library from macbook pro to imac and imac to macbook pro -- depending on which machine i am using at the time?

Do this:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

How can i use migration assistant from a Power PC G4 powerbook?

How can i use migration assistant from a Power PC G4 laptop that can't run 10.5 to a new mini running Lion? Mini's MA says I have to upgrade the laptop's MA but the upgrade requires 10.5 as a minimum
help,please
jan

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

HT4796 can i use migration assistant from one windows laptop to another

I need to set up iTunes on a new laptop but I don't know how to do it. Migration assistant seems to be only from a windows p.c. to a mac laptop. I want to transfer all my music from old (vista) to new (7). Can I do this?

No. Migration Assistant only works when using OS X on one of the computers. You would have to ask Microsoft Support.
Hope this helps

Can I use Migration Assistant to Copy files from one mac to another, but not delete the original files off of the original Mac?

I just purchased a new Macbook Pro Retina, and I have an old Macbook Pro w/o Retina and wish to use migration assistant. I still want to use the older Macbook Pro and keep all the files on it, but copy them and also put them on my new Macbook. What I'm trying to say is, can I use migration assistant to move files to a new Mac, while keeping the files on the old computer?

You can omit some broad categories, but you can't pick and choose individual items.
See Using Setup Assistant on Mountain Lion or Lion (preferred method), or the similar Using Migration Assistant on Mountain Lion or Lion for the gory details.

Can I use Migration Assistant to install Tiger on my old Mac?

I am about to buy a MacBook that will, of course, come with Tiger and I will use Migration Assistant to bring my files over from my Powermac G5 which has just Panther installed. Since I am keeping both machines, can I use Migration Assistant to migrate the Tiger OS over to my Powermac? And can I do the same with the newer versions of software that will come with the MacBook (iLife etc.)?
Dual 2GHz Powermac Mac OS X (10.3.9)

The Migration Assistant can only transfer data to a computer which already has the Migration Assistant installed, and it will not transfer the whole Mac OS X setup in any configuration. Furthermore, the version of Mac OS X which comes with a MacBook is not compatible with your Power Mac G5. If you want Tiger on your older computer, you need to purchase a new copy.
(12427)

Using Migration Assistant to Move Data Files from one Account to New User

Is it possible or recommended to use Migration Assistant to move data files from an old user account to a new user account on the same volume/hard disk?

Migration Assitant cannot be used as a simple file transfer utility. MA can transfer an entire Home folder or entire Users folder but not individual files.
In general files in one user account cannot be moved to another user account as this would violate built-in security measures.
What you can do is to copy the files to an external device like a hard drive or flash drive. First log in to the old account. Then configure the drive to ignore preferences by Pressing COMMAND-I to open the Get Info window and check the Ignore permissions on this volume checkbox at the bottom of the window. Copy your files to the device. Log into the new account. Verify the external drive is still configured to ignore permissions (reset it, if not.) Copy the files from the external device into the Home folder of the new account. I would create a temporary folder for these files. If you still end up without the proper permissions you will need to make modifications that are easier done if all the files are in a single folder.

How can I use migration assistant to load my new Macbook Air?

How do I use migration assistant to load my new Macbook Air? Can this be done only wirelessly?

No, you can transfer from a Mac wirelessly, wired ethernet, Thunderbolt or Firewire. Your older Mac must have the same connection, but you can use adaptors if necessary. For example, you can use an Ethernet cable with an Ethernet-Thunderbolt adaptor if your older Mac has an ethernet port.
Wireless tends to be pretty slow (can take many hours) so it's recommended to choose a wired connection whenever you can.
Here's more information:
http://support.apple.com/kb/HT4889
Matt

HT204350 Can I use Migration Assistant to transfer data from macbook running 10.7.5 To a macbook air running Mavericks? On first attempt destination machine says that os versions are not compatible for Migration Assistant.

I am trying to transfer contents from old macbook running os 10.7.5 to a macbook air running os 10.9.1 using migration assistant but the destination macobook air says that migration cannot proceed (yellow triangle) because the os on the macbook is not up to date (assuming that eans 10.9.1). However old macbook cannot be updated to 10.9.1.
Can anyone suggest a way around this please?

Try looking at this section in the Migration Assistant article.
Migrating using FireWire or ThunderBolt

Can I use Migration Assistant to migrate from a hard drive on the same computer?

I have a Mac Pro with spaces for four hard drives.
I currently have only one hard drive, with Mac OS X 10.6 on it.
I am getting a new, second hard drive (a Solid State Drive). I want it to be my primary drive, to install Mac OS X 10.6 on that and use that as the startup disk.
I want to leave my original hard drive in the computer as a secondary drive.
I understand that the Migration Assistant can only import settings from another, separate, Mac? Is that true?
Or is it possible to tell Migration Assistant to get the settings from this older hard drive, even though it is on the very same computer?
Thank you in advance for insights, suggestions, advice and ideas!

MA will transfer your current system preferences to the SSD regardless of where they come from.
BTW, you will need a special mounting sled for the SSD. You should find them at OWC.

How to recover Mail and Mail Downloads when you can't use Migration Assistant

I have a MacBook 2.4gHz that had a 750GB HD that crashed yesterday. Disk Utility said "This Hard Drive has failed, recover or backup what you can, then reformat." So, I removed the 750GB HD and replaced the original 160GB HD and reinstalled OS 10.7 on that Drive. I put the 750GB HD in an external case and hooked it up by USB (only available hookup with my external case). I can see all my content and tried to use Migration Assistant, but it hangs up at "preparing content to transfer." So, I decided I would have to drag all the old content onto my new user on the internal HD. I moved Movies, Pictures, Desktop, Documents, Music, and Downloads. However, I can't move any of the parts of the hidden User Library, primarily because I can't find or see it.
My question is how to access the User Library in a non-bootable (although having OS 10.7 installed) External HD. I've tried the ~/Library/ in Go>Go to Folder, but it goes to the running HD User folder, not the external. Can anyone tell me how to crack into this folder? I'd like to retrieve preferences, mailboxes, address book, etc.
I realize it could be lost, but literally everything else is still present. FYI: I plan to hang onto the 750 until the replacement HD arrives, so I can be reminded what Applications I had installed. There isn't room for all of those on the smaller HD.
Thanks,
Ronda

Update: I managed to get Migration Assistant to move something, but it didn't work out as I expected. Because I've already installed the OS and some applications that I need, as well as copying over most of the user files except the library, there wasn't much room left on the smaller disk. I purchased the firewire 9pin to 6pin cable that would allow me to use the firewire port on the external drive and selected the main user. There wasn't enough room to move all of the user, so I selected only the "Other Files" folder (about 2 GB), not all the items I had already copied. I set that to install last night at 9:32pm. At 4:00am it said there was still 10 hrs and 29 minutes to go. My husband checked it at 6:45am and it said 19 more minutes. When he arrived home at 4:30pm, it was finished. When I arrived home and logged out of the administrator and in to the main user, immediately it showed my desktop with all the folders that I had placed in the sidebar of the Finder window and everything looked exactly like it had on Monday before the crash, then the beachball started spinning and when it finally came up for air, all those folders were gone, my dock appearance was gone and everything was back to the bland new user settings that Mac OS starts with.
My mail file did get moved over with its thousands of messages, but not mail uploads nor the desktop appearance settings and it doesn't appear that any other settings have migrated either. It's difficult to tell, since I can't install my applications on the smaller drive.
The replacement drive from WD arrived, but it is a 2TB "upgrade" and it doesn't even fit in my MacBook, so I have to send that back and wait longer.
I'm still trying to recover my appearance, and combine the various users into one. If anyone has suggestions on how to get the mail uploads folder, preferences, etc. I'd love to hear them.

Can u use Migration assistant from 10.5.8 to 10.7.2?

My new MacPro is OS X 10.7.2 and my old one is 10.5.8. Migration assistant does not work either from eithernet hookup or Firewire 800. Is there a software patch or update for either box to allow migration from Old OsX 10.5.8 to 10.7.2?

Yes, but you must use Migration Assistant from the new computer and boot the old computer into Target Disk Mode - Transferring files between two computers using FireWire.
Mac OS X 10.7 Help- Transferring files between two computers using target disk mode
How to use and troubleshoot FireWire target disk mode
OS X Lion- How to use Migration Assistant to transfer files from another Mac
Migration Assistant tips and tricks

Can I use Migration Assistant to backup to an older machine?

I have a 2008 MBP and a 2011 MBP both running snow leaopard. I originally used migration assistant to transfer everything from the older machine to the newer one when I bought it. Now I have a faulty hard drive [that causes a lot of pinwheeling] that needs to be replaced by apple.
Although I have all my non-OSX data backed up I'd rather not have to go in and backup each application before I get the laptop serviced. I was wondering if I could use migration assistant to transfer everything from the 2011 machine back to the 2008 machine and then when I get the new hard drive I can do it again from the 2008 machine to the 2011 machince.
Basically use migration assistant to do a backup that I can then restore later.

Interesting question! May work if the files are compatible with the os on the older machine. See if there is a solution in the How to use Migration Assistant to transfer files from another Mac and Migration Assistant tips and tricks articles.

HT4889 Can I use Migration Assistant to update iTunes (only) from my optical drive Mount Lion computer to my Maverick OS computer?

Similar Messages

Maybe you are looking for