HT4889 Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it show up in the new Mac's computer folder. Help
Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK. Something about the Migration Assistant is being missed, but I have no idea what it is.
Help
Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?
Similar Messages
-
I downloaded "Slims Add On Manager" and now I cannot find it anywhere.
Thank you very much, the-edmeister.
Geez, do I feel silly for not knowing this!
Thanks again. -
I'm new to Mac. I have an iPhone and a Mac Mini. My original iTunes was on a Windows computer that crashed. So, all of my iTunes Music and Movies are gone. How do I get the movies and music from my iPhone to the new Mac Mini?
If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help. Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive.
-
I want to migrate from MacBook Pro (Tiger) to Macbook Air (brand new) Lion. How can I migrate?
Hello.
I have a old macbook pro running tiger on it, and I recently purchased a macbook air.
I want to use setup migration so migrate all my settings, applications, etc to the new macbook air.
However, both laptops don't have firewire port.
I do not have a time machine backup for the Tiger. (does it even have time machine for Tiger?)
Please let me know how I can migrate from pro to air.
I really want to avoid manually migrating.
Thank you for all your help in advance!A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011 -
I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
Using 2 displays, connected via HDMI and thunderbolt
Been on to support a number of times now - is anyone experiencing the same issues?BUMP.
I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
kernel[0]: Previous Shutdown Cause: -128
I don't know if that's related or not, but maybe helps? -
I've had **** with my iMac, the hard-drive failed so i replaced it with a new 1TB Samsung drive. Then when i tried to install SL from the install disk, all went to plan until it asked me which drive i wanted to install it on, where it came up with a box where my options should have been, but instead it didn't give me any options to install it on any drive i.e. it asked which drive i wanted to install it on but no drives came up to select.
So i followed the advice from another forum, look at the 'Extended Hard-drive preparation' response
( https://discussions.apple.com/message/10576009#10576009 )
After following these instructions i have now got a new partition, but when i restarted my computer to install SL on the drive, the option to boot from the drive is now not available, now i must boot from the install disk, whereas before i was able to boot from either the install disk or the hard drive. The hard drive is still visible in disk utility as it always has been, but i am now unable to boot from it, let alone install SL.
Please help my iMac has been broken for months and i've been trying to fix it for so long and am getting problem after problem. Thank you!
<div class="mcePaste" id="_mcePaste" style="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;" mcestyle="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;"></div>Hi db2
That off the shelf MS-DOS / FAT-32 drive needs to re-partitioned GUID Partition Table / Mac OS Extended (Journaled) before you can install OS X and Startup your Intel iMac from it.
1. Boot from your original install or retail SL DVD and open Disk Utility.
2. Highlight the new HD in the list of drives and select the Partition tab.
3. Under Volume Scheme select 1 Partition and click on the Options... button.
4. Select GUID Partition Table in the drop down window and click OK.
5. Set the Format to Mac OS Extended (Journaled) and click the Apply button.
6. Once thats done, then you can do a clean SL Install, Restore from TM , your old HD or Bootable Clone.
Dennis -
Can the new Mac Mini boot Snow Leopard from an external hard drive?
I currently boot my 2009 Mac Mini from a FW800 external drive with 10.6.8. If I just plug my external drive into a new 2011 Mac Mini, will it boot into Snow Leopard if I set it as the startup disk or will I get a kernel panic?
I bought a 2011 Mac Mini, which came with Lion installed. I thought maybe I could repartition it and have a Snow Leopard partition. So I repartitioned it (500gb split into two 250gb partitions). I named the new partition "SnowLeopard" just to make it easy for me to tell the difference.
I attached the external DVD and put in a Snow Leopard installer disc, holding down the C key so it would boot and install from that, but it just spun for awhile. Doesn't appear to work.
Then I read somewhere else that someone had managed to clone a copy of Snow Leopard onto an external drive and boot from that. In their situation they were talking about a MacBook, but the principle seemed sane.
So I rebooted, holding down the T key to put the Mac Mini into Target hard disk mode, and attached it via Firewire to another MacMini (circa 2008 or so, not sure of year, but it was upgraded last year to Snow Leopard and has been upgraded along and along). Then I used Carbon Copy Cloner to copy Snow Leopard (that is, the entire hard disk-- System and all applications and data) to my newer Mac Mini's "snow leopard" partition.
For yucks, when it was done cloning, I restarted the older Mac Mini, and had it boot from the newer Mac Mini's snow leopard partition--- it worked! To make it easy to tell the difference, I changed the desktop background to something completely different. I think I tried booting from Lion but I can't remember if that worked.
Then I rebooted the newer Mac Mini, which booted up in Lion, of course. Going into System Settings, I changed the startup disk to the "snow leopard" partition, and rebooted, and it booted up in Snow Leopard.
I have yet to test the applications on the Snow Leopard partition. Another problem has arisen.
Because with both of the Mac MInis being active on the network, they both had the same computer and user name. So I renamed the newer Mac Mini to something completely different, and changed the password.
Unfortunately, now I cannot change any other setting in the System Settings that requires a password. While the newer Snow Leopard lets me log in with the new user and new password, whenever I try to click the "lock" icon to change something, I'm prompted for a username and password. Apparently this is some different username and password than either the new or old username/password.
I've tried various combinations of both: new user/old password, old user/new password, old user/old password, etc.
So if you do what I've done, be careful about changing the username and password on your cloned computer. I think it may be wiser to create a new user and then delete the old cloned users. I may just have to re-clone the old Mac Mini to the new one again.
If anyone has any ideas about this password conundrum, please pass along! -
Attempted to import 6.5 GB of (v. 7.1.5) iPhotos from old iMac to new iMac (v. 9.2) using Migration Mgr. over fire wire. All photos (plus many dups) appeared in EVENTS and PHOTOS in the new Mac – but NO ALBUMS. I read a previous response to a similar question -- to copy the pictures library to the new computer. How best to do that?
There's actually an option to iPhoto Library Manager that makes this all almost work flawlessly (and work well enough for me). With the exception of Photo Albums that the pictures are part of, if you select "Library > Rebuild Library..." and then select "Scavange Orphaned Photos" check box, then it will put all the Photos and Movies into the "Scavanged Photos" album. It matches the modified pictures to their originals. It preserves all the event names and photo groupings. All the meta-data I could spot check it got right (although with 44k pictures, I only checked a few). If you fail to select this option, however, it will find no pictures at all when it goes to rebuild the library (this was true of the small test libraries I tried as well as the big, monster 280GB library I just finished converting). The conversion process took 5 hours to run, but in the end produced a library my new iPhoto can read and that I can interact with. I'll be suggesting to the iPhoto Library Manager folks a notation that would estimate the number of Orphaned Photos and display that number as a hint to the user that the option would be useful.
Edited: Thanks to Old Toad and LarryHN for their help in finding which of the many options to transition this library to 9.5.1 I needed to use. Sorry if I took my frustration of the past several months out on you guys for generously trying to help me. -
bought games and music on my ipod touch and then bought a new mac, but i updated my ipod on the new mac and lost all of my games and music and they arent on my computer or my ipod touch:( The apps i bought are not on my old computer either!! please help!!! I don't want to buy them all again!!
- You can redownload yur apps at no additional cost. See:
How to redownload purchased apps from the App Store
- You only get one download of music and it is up to you to make a backup. However, sometimes if you explain what happens the iTunes store may allow a redownload of music. You can contact them by starting here and selecting the appropriate topic:
Apple - Support - iTunes -
I did not realize Iife was already on the new mac, and installed I life from a disk. Now Iphoto has a circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?
This sounds different than with my IOS devices, since I am able to see the photos even with a connection to the Internet.
Do you mean without a connection to the internet? With a connection it's logical you would be able to see the PS.
The following is from iCloud: Photo Stream FAQ
Can photos be saved or downloaded from a shared photo stream?
Yes. Once photos are shared, anyone who can view the shared photo stream can download and keep the photos permanently.
On a device using iOS 6 or later, you can save photos to the Camera Roll. On a Mac, using iPhoto 9.4 or Aperture 3.4, you can save photos from the shared stream to your local Photo Library or any other location on your Mac. On a Windows PC, you can copy photos from a shared photo stream to any folder. On the web, photos can be downloaded directly to your computer from the detail view of each photo.
This tells me that the image files are not on the HD unless the subscriber chooses to download them. -
Just got a new Imac. I migrated from the old Imac. When I boot the new Imac, the old user screen boots up. I have to log out and then log into my new user on the new mac. Whats up?
Thanks.Thanks for your help. But the PowerBook has a Migration Assistant designed for the purpose of transfering files from the old Mac to the new Mac. The steps take me to the point where I'm instructed to restart the old Mac while holding down the "T" key. But nothing happens when I do that. It just restarts and the Migration Assistant on the new Mac still reads "waiting for old Mac to restart".
There has to be a way to do this. I can't install the original applications on the PowerBook from scratch because they were meant to run on Classic. The PowerBook doesn't recognize any of the old Classic installation disks I have from previous Macs (Oddly, the PowerBook has capability to run Classic, but not the actual software-- and no Classic installation disk was provided, unlike the software provided for iBooks. And I can't install any of the System X upgrades because they need to recognize the original application already on the computer in order to upgrade.
I just calculated that if I have to rebuy all the applications I need, I couldn't afford to do it (unless someone can-- or even wants to-- take the old versions off my hands to offset the cost of buying new ones).
There must thousands of graphic designers like me who run a small business and can't afford to re-stock their entire software collection every time they upgrade to a new computer. Why would Apple diss the very people who have been supporting the company (actually keeping it alive) all these years? I don't think they would do that. I'll just have to keep looking for a solution. -
When I tried migrating from iMac (10.5.8) to the newest iMac the target mac said I needed the latest OS on the source mac. I will install Snow Leopard on the source mac, will this do the trick? Or do I need to install Mountain Lion?
I would forget about using any Migration system as all older programs you have on the older Mac, all PowerPC programs, won't work or migrate to the new system. Just network them over your home LAN and Copy your personal files over to the new Mac.
But if you are Dead Set on using the Migration systems then the old Mac will need Snow Leopard installed. -
i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.
Welcome to Apple Support Communities
That's the classic behaviour after using Migration Assistant and that's normal.
To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472 -
After migrating a new Mac Book Pro from Time Capsule, I noticed that I lost a group of Favorites on the older iMac. The puzzling thing is that the Favorites are on my iPhone--not the old iMac or the new Mac Book Pro. How do I get the Favorites back?
If you are syncing using iCloud, try going to System Preferences/iCloud (computers) and checking Safari. If it is checked, try deselecting it, wait 10-15 seconds, and then check it again.
-
I would like to transfer my old copy of Photoshop Extended, from my old Windows laptop to the new Mac computer. Thank you
If your copy of PS was for Win, your installation disk is not compatible with Mac. You can't use a Win serial number on Mac either. You would need to contact Adobe Customer Care and request a cross grade. Depending on which version you own, this may no longer be possible. I believe CS6 still qualifies for cross grades though.
Another option is to join the Creative Cloud Photography Plan ($9.99/mo) which includes PS CC and Lightroom which will run on on both Mac & Win.
Creative Cloud Photography plan | Adobe Creative Cloud
Nancy O.
Maybe you are looking for
-
How to get passwords working in Pages documents?
I've set a pages document to require a password to open. When I open the file, it opens without requiring this password. Any thoughts on how to get the password working? The doc is on icloud, could that be a factor?
-
On making call to Oracle procedures from Java, Value becomes null on oracle
We are using some user defined Oracle data types in my Java/J2EE application and some of them are Oracle collections(ex. VARRAY). We are making a call to Procedures/Functions from Java, there are some parameters of user defined data types declared in
-
Why does Photoshop Elements 10 print dark and red, and not match the computer screen?
I switched from Photoshop Elements 7 to Photoshop Elements 10. I cannot get a print of a photo that matches the screen. Photos are dark and red. I cannot edit the photos because I do not know what will print out. I have switched back to Photosho
-
This question is related to xsl rathar than java/xml. I would really appreciate if someone could help. The xml document I use is something like this below. <Performance> <SortInfo> <Column>CompletedMeasurement/VinCount</Column>
-
NoSuchfieldName error while compiling a class that was produced by sqlj
hello all, could you please tell me where the following error code came from when i tried to execute java TestInstallSQLJ? I could use sqlj TestInstallSQLJ.sqlj to translate it into java code, but then.... thank you for your help. Exception in thread