HT4890 Where can I check which devices are receiving iCloud information (photos, notes, etc.)?

I conceive iCloud as a virtual HD from which my devices can access data and, more, which will share same info. between all registered devices. I use MacBook Pro, Iphone 4s and iPad and they are not the same. What do I do? Where can I check wich devices, and what applications are supposed to be shared? Thank you in advance.

Be sure you devices are sign into the same iCloud account, then turn the data you would like to sync with iCloud to On.  These settings on your iPhone and iPad are in Settings>iCloud.  On your Mac, they are in System Preferences>iCloud.  This guide explains how to set this up: http://www.apple.com/icloud/setup/.
Also, if all your devices are signed into the same iCloud account, any data they sync with the account (such as contacts and calendars) will be merged with the data from other devices using the account and the merged data will appear on all connected devices.

Similar Messages

  • How can i see which devices are connected to my wireless network?

    how can i see which devices are connected to my wireless network?

    Login to your router and view the DHCP clients.

  • How can I check which documents are stored on iCloud?

    How can I check which documents are stored on iCloud?

    Welcome to the Apple Community.
    You can see in a number of ways, the easiest is probably by logging into your account at ...
    iCloud.com
    on your computer.

  • Which Devices Are Receiving My iMessages?

    Does anyone know if there's a way to see how many (or which) devices are receiving your iMessage messages? For example, if I am [email protected], I'd like to know if there are other devices (aside from my own) receiving messages. Is this something Apple can tell me, if I can't find this using the iOS/Mac UIs?
    The reason I ask is I had a friend who's dad started receiving all of his messages addressed to his email. And he never enabled Messages on his Dad's phone for his own email, just at some point used the App Store.
    Thanks!

    Sign out of Messages and reset your phone. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. Then sign back in to Messages. Use the Settings app to check if the phone number can now be selected.
    Settings > Messages > Send and Receive

  • How can i determine which devices are used at the moment?

    Hi all,
    I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface.  I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
    Thanks,
    Omer
    Solved!
    Go to Solution.

    Hi Omer,
    so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
    GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
    That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Where can I find which Infotypes are configured? (transaction)

    hi experts!
    I need to know if there are any transaction where I can find which Infotypes are configured in a system landscape.
    can somebody help me?
    Thanks in advance!

    Hi,
    Infotypes are configured using transaction PM01, you can check in this transaction
    Regards,
    Shrinivas

  • How can I see which devices are registered for automatic download (synching) from iCloud?

    Hello!
    I have a numerous of apple devices and would like to know how I see if they are ALL regisitered to my icloud.

    Devices are associated with an Apple ID whenever you do one of three things: turn on iTunes Match; turn on Automatic Downloads (in Settings>iTunes & App Stores on an iOS device, and in iTunes Preferences>Store on a computer; or download previously purchased content from the iTunes or App stores.  If you do any of these on your other devices, they will become associated with the Apple ID they are sign into at the time. 
    Keep in mind that once associated with an ID, they cannot be associated with a different ID for 90 days.  You can associate up to 10 devices with an ID, 5 of which can be computers.

  • Can you control which devices are on network

    Is there an application to control and monitor the Airport Extreme Base Station Network?
    I'd like to be able to shut down access to, for example, my kids' devices at night without shutting down the whole network.

    Timed Access in AirPort Utility will allow you to control individual devices and the times that the device is allowed to connect to the wireless network.
    For example, you could setup Junior's iPad to be allowed to connect to the network Weekdays between 9:00 AM and 9:00 PM. Junior would not be able to connect to the network at any other times than those listed.
    Another device could be setup to have access to the network Weekdays between 5:00 PM and 10:00 PM, and so forth.
    Devices that do not have a specific rule set up for them are allowed to connect to the network at any time.

  • Where can I see what devices are connected to my Airport Extreme?

    I just switched from a Belkin wireless-g router to the Airport Extreme (802.11n). With my Belkin router, when I entered the address "192.168.2.1", I was taken to a menu where, among other things, I could view all connected devices. How do I do that with my new Airport Extreme? Thanks!

    Hi David, welcome to the discussions!
    You will have to dig a bit for the info, but it is there.
    Open AirPort Utility
    Click on Manual Setup near the bottom of the pane
    Click on the gear shaped Advanced icon at top of the window.
    Click on Logs and Statistics
    Then click Wireless Clients or DHCP Clients to see who is connected.

  • Can I filter which emails are received?

    I'm only interested in getting email from a small group of people on my iPhone. IS there a best way of doing that?
    When I'm at home I'm fine checking all the other email I get daily. But on the smaller screen a lot of email can be harder to navigate and not all is needed while on the go.
    Do I need to create a special email account to access from my iPhone? Then I'd have to create rules to forward only the filtered emails I want to receive to the special account?
    Thanks,
    DAN

    I already tried that. I set the table to filter out and
    display only the records that match the landlord ID to the session
    variable(which I named 'Landlord_ID' not 'MM_username ' like I said
    earlier). When I tried to simply insert the session variable into
    the page just to see what data would show up, the result is just a
    blank space, so the session variable itself apparently has no data
    value to echo in the PHP form.
    Because of that, I have no idea how to tell dreamweaver to
    filter based on the Landlord_ID, even though I CAN echo the
    landlord ID variable in the recordset, I can't figure out how to
    put that runtime value in the filter.

  • I think my ex has access to my Icloud, how can I check what devices has access to my Icloud?

    I think my ex boyfirend has access to my Icloud and has his iphone connected to my Imessages. How can I check what devices are all on my ID?

    YOu can try siging into icloud.com
    But you should just change your icloud password.

  • Where on my HD can I check which RAW compatibility files are installed?

    I know from the Apple Support page which cameras are supported but I have not been updating RAW compatibility files via Software Updates.
    Will installing the latest 5.01 Update automatically update to install the whole list of cameras? Or will it only install the few latest cameras listed as 5.01, please?

    Many Thanks, sberman
    I see that 2 of the cameras I am about to purchase are already on the Supported by Mavericks list and so I don't need to install the 5.01 Update which lists cameras I don't have or use.
    The SSD built-in on my iMac is filling up (OS and Applications only) and so I try not to install software which I don't need, hence my question.
    In any event, when I have bought my cameras, shot RAW, and uploaded the images I expect I would be seeing an OS notice if their compatibility wasn't present.

  • Regarding where can I check logs to see which user ID

    Hi,
    In RSA1, if some one deletes the source system, where can I check logs to see which user ID did it and when.
    Thanks
    Vasu.

    Transaction RSA1 "BW Administrator Workbench"
    Users need an authorization for object S_RS_ADMWB with field RSADMWBOBJ = "SOURCESYS".
    Source systemes are stored in table RSDS. Table change log is not active (see transaction SE13) but as far as I can read the source code some critical events are logend in the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/c8263712c79958e10000009b38f936/frameset.htm">Application Log</a>. View the entries for object LSYS_DELETE_<logsys> with message 618(RSAR) using transaction SLG1 .
    Kind regards
    Frank

  • Where can i check in the real time monitoring tool if there are active calls in progress?

    where can i check in the real time monitoring tool if there are active calls in progress? 

    Hi
    Selecting Call Manager -->Call Process ---> call activity
    HTH
    Regards
    Carlo

  • Regarding where can I check logs to see which user ID did it and when

    Hi,
    In RSA1, if some one deletes the source system, where can I check logs to see which user ID did it and when.
    Please help me..
    Thanks.

    Hi,
    Check if there is any job in sm37 with DEL ans user as *. Perhaps you may get some clue.
    Bye
    Dinesh

Maybe you are looking for

  • Where did the iTunes Store Wishlist go?

    What happened to the wishlist? It was in the store, a link on the right hand side of the homepage not long ago. You can also still click the button in the down arrow next to the buy button for songs to "Add to Wishlist." Message was edited by: KataMa

  • Vendor: ABC Analysis

    Hi, How can I perform the ABC Analysis on Vendors to check the spends. The Vendor Master does have indicator in Purchasing view. The Standard TCode MC40 / MC46 does not help. Thanks

  • Why call between WebClient agents fails?

    Hi, I have just recently installed the mySAP CRM 4.0 IC WebClient (CRM40 SP00). I have been testing the installation with CCS (Contact Center Simulator) and for a basic CCS supported tests (Inbound Phone call, Outbound Phone call, Chat) everything se

  • Question about using for-loop to generate array from DAQmx. Thanks!

    I have a laser system with a frequency of 1kHz, I am using this 1kHz signal to trigger the DAQmx and get the data from a photodetector, e.g. I will get 1000 data points during 1 second from DAQmx, but I need to separate this 1000 data points into the

  • Problem IXOS BSP and JPEG Format

    Hello, I have a problem with JPEG By displaying documents from archive Server in IE7.Only the first page of the document is displayed in Web Browser but not in the livelink viewer. if the document is TIFF type the process is correct(IE7 Browser calls