HT4899 spam email "notification system" or "notification service"

I have been receiving lots of emails with the heading "notification system" or "notification service". They are not being caught by the iCloud spam filter despite my not opening and moving to junk. Any idea where these are coming from or how to stop?

I have been getting a number of these as well. The last one came in with a return address of [email protected] The subject was "4 service messages has been sent to you"
The messages have a very Facebook like look to them.

Similar Messages

Invoking an EMail Notification service from another BPEL process(Service)

Hi Everyone,
I have a scenario, where i need to call my email notification service in to another bpel process(for FTPPut). Now i tried to use the email service in the FTP Put process, in the failure condition, the instance is in "Running" state forever. If i tried to run the email service individually its working fine. And if i observe the Audit Trail, i found the process went up to the client of the email service and then onwards its not able to initiate the email activity.
I guess the way i provide the inputs,(to, subject and body) is making something difficult for the service to complete. I am sending the body and the subject inputs from the FTP put process and giving the to variable as default.
As my email service is an one way operation, may be due to that even after I wait for long time the instance of the FTP process says running(in running) otherwise it would have thrown an timeout exception or something...
Can any one shed your thoughts around this scenario...
Thanks in advance..

It really comes down to the proxy service on the OSB. Is it invoked by a WSDL? If so you should be able to take the endpoint defined in the proxy service messaging configuration and use that URL. You also need to use the sb transport type.
Can you also post the blog you used, then we can put it into context.
also have a look at this link.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/bpelpmtransport/transport.html#wp1116011
cheers
James

BPEL email Notification Service - Can it support protocol other than pop3

Hi,
I wanted to confirm can BPEL email Notification Service support protocol for email other than pop3, such as mapi
Thanks,
Sachin Sutar

Currently only pop3 and imap are supported for incoming mail and SMTP for sending email.

Tasks email notification...

When I create a task,the tracker and the person to whom the task is assigned should receive an email notification.
But the email is not generated.
Could someone please tell me what the problem could be?
Thanks in advance,
Sudha.

Hi,
I have done the following:
1.Workflow Engine Settings for Tasks or notifications:-
System Admin/ System Config / Workflow /Engine
2.Email Notificator Service:-
System Admin/ System Config / Knowledge Mgmt/ Content Management/ Utilities / Channel Originators
3.Email Channel SMTP configuration:-
Go to System Administration->System Configuration->Knowledge Management->Content Management-> Utilities -> Channels -> Email Channel
This works in Dev and QA.But does not work in production.
Could it be that the SMTP server might be accepting emails from Dev and QA and not from the production?
Thanks,
Sudha.

Email notification in human task: How to customize email subject.

Dear all community members,
I am using email notification service in human task to receive email notification if task is assigned to me. I have configured email notification in human task & I do receive the email in my inbox as assignee.
The default email subject is like [Action Required: TASK_TITLE], I want to remove this [Action Required:] from email subject.
I tried setting <%null%> in Notification Header in .task file but the email subject is still has Action Required.
Is there any way to customize email subject so that I can get rid of [Action Required:] [FYI] in email subject.
Thanks & Regards.

I believe this will help - http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_cust_res_bndl.htm

Users unable to get email notifications on followed sites, or documents: System.IO.FileNotFoundException and Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request) errors

Hi Community
I have an issue on a live SP2013 farm that is really causing me grief. Although I ( Farm Admin) and my other users can follow items which are subsequently confirmed in our respective News Feeds -
none of my users are are actually getting emails notifications .
Alerts ( did) work fine.
I have written some PS to vew and set the SPS-EmailOptin for each user
$up[$upManagerAttribute].Value = $managerNTName
# check if the email check boxes are unchecked '1' then if so check all
write-host -fore white "User Profile for user"$NTName "Now has email opt in currently set to" $up[$upEmailOptin].Value
if ($up[$upEmailOptin].Value -gt 0)
$up[$upEmailOptin].Value = 0
write-host -fore white "User Profile for user"$NTName "Now has email opt in all checked."
Very few are unchecked. $up["SPS-PrivacyActivity"].Value = 4095 is set for all users as in
the the privacy settings on the newsfeed are all checked
For my currrent client I set up a development intranet which had the seperate web apps for the main portal and mysites. Test users were able to follow documents, sites without any problems. Before go live I was asked to accomodate a requirement
where there is only one web application (don't ask!) effectivley http://myintranet
so mysites sits under http://myintranet/mysites . I made the appropriate changes to my AutoSPInstaller scritpt and al appearedd l good : services , Service appplications, mysites are all started. I am using
the two app pool accounts one for the portal and one for mysites.
A quick look at the the releated threads on this forum indicated permssions could be DB permissions related tho I am not seeing anything in ULS to strongly point to this
$webApp = Get-SPWebApplication http://myintranet
$webApp.GrantAccessToProcessIdentity("mydomain\SP_ProfilesAppPool")
- checked and SPAcess Data is given to the mysites app pool accout to the portal web app .
I am seeing some odd errors in ULS
Ignoring the space ' critical' warning which I have flagged up to Ops and I doubt is my real problem. The errors I see that are related are :
System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002), StackTrace:
at Microsoft.SharePoint.SPWeb.GetList(String strUrl)
at Microsoft.Office.Server.Microfeed.MBUtilities.GetPublishedFeedListPrivate(SPWeb web, String relativeUrl)
at Microsoft.Office.Server.UserProfiles.FollowedItem.CreateFollowedSite(SPWeb site, FollowedItemData data)
at Microsoft.Office.Server.UserProfiles.FollowedItem.Create(SPSite site, SPWeb existingWeb, Uri url, FollowedItemData data)
at Microsoft.Office.Server.UserProfiles.FollowedItem.RecreateByReferencedItem(SPSite site, SPWeb web)
at Microsoft.Office.Server.UserProfiles.FollowedContent.RefreshFollowedItem(FollowedItem item, SPS2SAppExecutionPolicy policy)
at Microsoft.Office.Server.UserProfiles.FollowedContent.Follow(Uri url, FollowedItemData data)
at Microsoft.Office.Server.UserProfiles.FollowedContentServerStub.InvokeMethod(Object target, String methodName, XmlNodeList xmlargs, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.ServerStub.InvokeMethodWithMonitoredScope(Object target, String methodName, XmlNodeList args, ProxyContext proxyContext, Boolean& isVoid)
at Microsoft.SharePoint.Client.ClientMethodsProcessor.InvokeMethod(Object obj, String methodName, XmlNodeList xmlargs, Boolean& isVoid)
at Microsoft.SharePoint.Client.ClientMethodsProcessor.ProcessMethod(XmlElement xe)
and
5b93b0ef-b1ff-437d-b674-5285be9b9395 Stack trace:
at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, Boolean swapSchemeForPathBasedSites, SPUserToken userToken)
at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken userToken)
at Microsoft.SharePoint.SPSite..ctor(String requestUrl)
at Microsoft.Office.Server.UserProfiles.SPS2SAppUtility.TryOpenWeb(Uri url, SPSite& site, SPWeb& web, Boolean& inSPContext)
at Microsoft.Office.Server.UserProfiles.SPS2SAppExecutionContext.InitializeForSite()
at Microsoft.Office.Server.UserProfiles.SPS2SAppExecutionContext.EnsureInitialized()
Also, I am testing with my account which does have all the mysites newsfeed options checked in the CA -> UPA ->"Manage User Profile"
Anybody seen this whilist I follow the where those exceptions take me.
Freelance consultant

Hi,
Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Send email using notification service

Hi,
I need to send mail using notification service. I have configured the <SOA_HOME>/bpel/system/services/config/ns_emails.xmlns_emails.xml as follows:
<EmailAccounts NotificationMode="NONE" xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
<EmailAccount>
<Name>Default</Name>
<GeneralSettings>
<FromName>Oracle BPM</FromName>
<FromAddress>[email protected]</FromAddress>
</GeneralSettings>
<OutgoingServerSettings>
<SMTPHost>myhostname</SMTPHost>
<SMTPPort>25</SMTPPort>
<AuthenticationRequired>false</AuthenticationRequired>
<UserName></UserName>
<Password ns0:encrypted="true" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService"></Password>
</OutgoingServerSettings>
<IncomingServerSettings>
<Server>yourdomain.com</Server>
<Port>110</Port>
<Protocol>pop3</Protocol>
<UserName>accountId</UserName>
<Password ns0:encrypted="true" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">lWlanww1urAqnYt1uPZFjw==</Password>
<UseSSL/>
<Folder>Inbox</Folder>
<PollingFrequency>1</PollingFrequency>
<PostReadOperation>
<MarkAsRead/>
</PostReadOperation>
</IncomingServerSettings>
</EmailAccount>
</EmailAccounts>
Only this ns_emails.xml file has been changed. And I am using the email activity in BPEL code to send mail. But, mail is not being sent.
Do I need to make any further changes in any other files in the server?

you need to replace the NONE value with EMAIL
see :
http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28987/phase12.htm
13.2.1 Configuring Your Company E-Mail Environment

Email notification for AE password Self-Service

Hi Guys,
I have tried to setup AE Password Self-Service and to an extent, its working. However, I do not receive an email notification on the newly changed password.
I have checked my SMTP settings via SCOT and for sure its working as thats the same system which I'm using the FireFighter (which works and sends out email notification).
I've checked on the backend system on the "changed documents" and I see that password was indeed changed by the user which I've used in the background job created in AE.
It seems to me that something is not correctly setup for the communication between AE and the backend system but I cannot figure out which area I should look into (after the above troubleshooting).
If anyone have any suggestions, I would be much appreciated.
P.S: I ahve done the below post-installation configuration:
1) ceated the connectors and tested the connections with success
2) setup verification fields in the password self service (successful as in the initial screen of AE, I'm about to request a change for a new password and the successful message appears)
3) SMTP server in the Workflow is also setup
4) User Data Source is updated (SAP UME)
5) Backgrund jobs on Email Dispatcher and Email Reminder are created
Thanks.
Raymond

Hi Jagat,
Where do we need to modify those parameters suggetsed by you because i can't find any option to change these infotypes in AE.
Kindly suggest, Can you kindly share ADM 955 if you possibly have it with you.
Thanks and Regards,
Siddharth Kaul

Service Manager 2012 R2 (rollup update 2) Change Request/Review Activity Email Notifications

I am trying to setup an email template for Change Request Reviewer. The email should contain as much details as possible, include Change Request ID, Description, Reason, Impact. etc. I have tried to include Data Properties from "Contains Activity",
"Has Parent Work Item", "Depends on Work Item"... but they all show blank data in email notification. Which Data Properties should I use?
Regards
Andrew

Maybe this blog post is helpful:
Using Data Properties From the Parent Work Items in Activity Email Templates
Andreas Baumgarten | H&D International Group
Thanks Andreas,
I have seen this post, but it didn't work for me. Eventually, I found solution. Below is working code.
For example:
"Contains Activity" doesn't have Change Request Data Properties "Reason". I inserted "Reason" from "Has Parent Work Item", copy inserted code "TypeConstraint=... .../Reason$", paste it after "$Context/Path[... ...System.WorkItemContainsActivity' "
to replace the original code inserted from "Contains Activity".
Also, don't forget to adde SeedRole='Target', but better to type
' by yourself.
Mark Marra 13 Nov 2013 9:24 PM
Be careful when copying + pasting SeedRole=’Target’ from this blog post. It should actually be SeedRole='Target' which has different punctuation around Target. I'd imagine that whatever blog engine Microsoft uses for this "helpfully" converted the
single quote to some weird right-slanted-single-quote which doesn't work in Service Manager when copied+pasted.
You guys might want to wrap it in a code block, or whatever you can use on the back-end to preserve formatting.
Description:
 
$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Description$
 
Reason:
$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='CustomSystem_WorkItem_ChangeRequest_Library!System.WorkItem.ChangeRequest']/
Property[Type='CustomSystem_WorkItem_ChangeRequest_Library!System.WorkItem.ChangeRequest']/Reason$
 
Priority: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='CustomSystem_WorkItem_ChangeRequest_Library!System.WorkItem.ChangeRequest']/
Property[Type='CustomSystem_WorkItem_ChangeRequest_Library!System.WorkItem.ChangeRequest']/Priority$
 
Impact: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='CustomSystem_WorkItem_ChangeRequest_Library!System.WorkItem.ChangeRequest']/
Property[Type='CustomSystem_WorkItem_ChangeRequest_Library!System.WorkItem.ChangeRequest']/Impact$
 
Risk: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='CustomSystem_WorkItem_ChangeRequest_Library!System.WorkItem.ChangeRequest']/
Property[Type='CustomSystem_WorkItem_ChangeRequest_Library!System.WorkItem.ChangeRequest']/Risk$

Push notification service fills the system log with errors

When I have the push notification service enabled, my system logs become filled with messages such as this:
Sep 8 22:54:54 xserve jabberd/c2s[2175]: [7] [::ffff:192.168.1.100, port=50064] connect
Sep 8 22:54:54 xserve jabberd/c2s[2175]: [7] [::ffff:192.168.1.100, port=50064] disconnect jid=unbound, packets: 0
They occur at a rate of about two every second. What does that message mean and how do I stop it?

When I took a look at push notification, I noticed that it was listening to a different port than what dovecot had been configured to use.(jabberd was set to listen to 5347, while Dovecot (email) was using the standard 5222 port for that open protocol. Not sure what the ichat server is set to use.
Eventually, I did manage to get it working by updating the push notification config to listen to 5222. But it made no real difference because thunderbird and mail.app prefer imap updatings instead of push notification. So I turned it off.
Not sure if this is of any help to you.
Message was edited by: JFMezei

Windows 8.1 - Windows Couldn't connect to the System Event Notification Service service

I have an issue that has been bothering me for a while on new 8.1 computers. Standard users are not able to log into the computer on the first try consistently. They receive the error message: Group Policy client service failed the sign-in access is
denied. They are stuck at the logon screen.
If an administrator logs in (local or domain), they can log in but get a black desktop with two error messages. The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable. The second error message is a popup
balloon. It states "Failed to Connect to a Windows service. Windows couldn't connect to the System Event Notification Service service."
When a standard user attempts to log in, event viewer records three warnings. They are listed in order from oldest to newest
The winlogon notification subscriber <Profiles> was unavailable to handle a critical notification event. -Logged 9:14:44
The winlogon notification subscriber <GPClient> failed a critical notification event. - Logged 9:14:44
The winlogon notification subscriber <Profiles> was unavailable to handle a notification event. - Logged 9:14:49
After a reboot, users still have the issue. I noticed that the user profile services and system event notification service are not running though their startup type is automatic. They start after a minute or two.

Hi Joseph__Moody,
Based on your description ,I assume it is a domain environment .First of all ,I would suggest you to try to update all the machine .
"I have an issue that has been bothering me for a while on new 8.1 computers"
Do you mean all the Windows 8.1 machine share the same symptom or just a specific one ?Did the machine work correctly before ?When did the issue start to occur ?Have you installed any third party software before ?Can we operate the machine when we login with
an administrator account ?
If the issue occurred with the specific machine :
"The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable."
Please try the following suggestions if we can operate the machine when we login with the administrator account :
Open Windows Explorer and navigate to: C:\Windows\system32\config\systemprofile and verify if it has the Desktop folder there.If the folder doesn`t exit, we can copy from C:\users\Default\Desktop location(This folder is hidden by default).
We also can try the following suggestions to have a troubleshoot :
1.Run "sfc /scannow"or "dism /online /cleanup-image /restorehealth" to check the health of the system files.
2.Perform a full scan with an antivirus software.
3."They start after a minute or two."
I suspect there is a third party service confilct here. Please perform a clean boot to verify whether there is a third party conflict here .
How to perform a clean boot in Windows
https://support.microsoft.com/en-us/kb/929135
If the issue occurred with multiple machines in the domian ,I would suggest you to check whether you have configured any logon scripts and logon group policy .We can remove the machine from the domain to have a troubleshoot .
If the issue occurred recently ,we can perform a system restore to recover the machine to a previous normal point.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

System monitoring - alert email notification

Hello Sapers,
I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur. Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
Thank you very much for any help

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

FM for changing system status in Service Notification

Hi all,
I have a tough situation here.
To change the system status in service notification, the system use "IQS4_CHANGE_STAT_NOTIFICATION".
CALL FUNCTION 'IQS4_CHANGE_STAT_NOTIFICATION'
EXPORTING
    i_qmnum                  =
    i_vrgng                  =
    I_CHECK_ONLY             = ' '
    I_SPRAS                  = SY-LANGU
    I_BEZDT                  = SY-DATUM
    I_BEZUR                  = SY-UZEIT
    I_POST                   = 'X'
    I_COMMIT                 = ' '
    I_WAIT                   = ' '
    I_REFRESH_COMPLETE       = 'X'
IMPORTING
    E_VIQMEL                 =
    E_STTXT                  =
    E_ASTXT                  =
TABLES
    RETURN                   =
2 main fields are required; i_qmnum and i_vrgng.
I am able to provide i_qmnum (as this is the service notification number that i need to change).
However, i_vrgng is a field in table (TC33-VRGNG). The values in the table does not make sense to me.
Example. To change the status to NOPR (Put in progress), the FM uses PPM2 or PPM6 for i_vrgng. If we take a look at the table TC33, it doesn't indicate in anyway how NOPR is related to PMM2 or PMM6.
Is there a guideline (ie, to change status to OSTS, i use a certain value in TC33-VRGNG to run the FM)?
Please see BAPI_SERVNOT_POSTPONE & BAPI_SERVNOT_PUTINPROGRESS for a clearer picture of what I'm saying.
Thanks,
Earl

Please try using FM STATUS_CHANGE_INTERN for changing System Status as i was not able to find any link between status and the field provided in FM in ur post.
This FM directly changes system status of any object.But this FM requires System Status Value not Text.
NOPR, NOCO etc are system texts.The main table for system status is TJ02T which will give u the status value for the status text.
For eg NOPR status text will have status value as 'I0070'.
Reward Points if useful
Edited by: Pratyasha Shishodia on Mar 14, 2008 11:07 AM

Email notification or remedy ticket creation if BI services fails

Hi All,
we are using OBIEE 10.1.3.4.X version as our production instance.
we want to set up email notification for a group if any of the BI services fails ( presentation services, Javahost service, Scheduler service etc ). We have 2 unix servers where we check the current status of above services.
Can anybody provide me information to do the same in Unix. I heard like we can write Unix script and that can be placed in Unix box to meet above requirement. Was any body faced similar issue, any body have successfully implemented to your projects.
How will you get notified if you are suing obiee 10g in your projects
Please let me know your thoughts.
Regards,
Yuva

Hi ..
Above mentioned weblinks gives information on OBIEE 11g. We are using OBIEE10g.
It would be helpful, if anybody provides information on getting email notification if any of BI services fails. I guess, as all the BI services are maintained by Unixbox, we need to write Unix script for the same.
Thanks and Regards,
Yuva

IStatemanagementResource and Notification-Service email

Hi All,
Presently, manually submitting the document at path (Content Admin.. --> KM Content -- >root --> content --> temp --> xyz.doc) an email from Notification-Service is sent to the approver with a link for approving or rejecting the document.
My requirement is send an email to approver using custom development.
Using the thread Re: Updating KM Workflow "status" , I'm successfully able to change the workflow status of KM document from "In-Progress" to "For Approval", but not able to send an email to approver.
Request you to kindly help me letting me know how to proceed further incorporating "Notification-Service" to send an email to the approver.
Many Thanks,
SK

Hi,
Content of this notification mail is controlled by xml and xsl files stored in KM. Check the below link which explains how to change those xml and xsl files to customize the approval/subscription notifications.
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90626697-0901-0010-2ca7-86e2a50ce70d&overridelayout=true
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/200c295a-9043-2c10-8d88-a6e1c84b21f9&overridelayout=true
you can find these xml and xsl files in content administration > km content > etc repository > notifications > WORKFLOW_EMAIL.xsl, WORKFLOW_en.xml.
Regards,
Yoga

HT4899 spam email "notification system" or "notification service"

Similar Messages

Maybe you are looking for