HT4906 i am using aperture 3.3.2 on the current os and cannot connect to photo stream, why not

why can I not use photo stream on my iMac?
i am signed into icloud
in aperture I click on turn on photo stream ... it sais enabling and comes back with
Aperture was unable to connect to photo stream
Peter

You can still use PS using Aperture 3.3.2 and earlier but the window and its controls will likely be dimmed out in the iCloud pref pane, as its expcted 3.4
Good idea, Clem, but I am using Photo Stream on 10.8.2 with Aperture 3.3.1 without problems. Even switching between Aperture 3.3.1 and Aperture 3.4 does not cause a problem. The controls are active in Aperture 3.3.1, but right now it takes a long time for the Photo Stream to be delivered, after turning it on. There is too much traffic in the iCloud.

Similar Messages

I am trying to organize thousands of images in aperture. The dates on the old scanned images is all 2008, when I started importing them. When I change the date in aperture some of them hold the modified date and some revert to 2008. Any ideas?

I am trying to organize thousands of old images in aperture. Aperture dates them all in 2008, when I started this project. When I change the date in aperture some of them hold the modified date and some revert to 2008. Any ideas?

I just tried a test library, re-imported fresh images from a hard drive, and the date changes still revert.
So neither your external drive nor your Aperture library are to blame.
What do you mean test in a different user acct? Would it be a good idea to uninstall and re-download aperture 3?
Appreciate all your help.
I meant the trouble shooting procedure described here: Isolating an issue by using another user account
To test, if some settings in your user account are faulty or preferences files corrupted, it helps to create a new user account from the "Users&Groups" System preferences. With a brand new user account you can see, if something in your current account is causing this.
Should you see, that Aperture is not even working from a new and clean account, I'd reinstall Aperture, and if need be the Operating system. Are you using any plug-ins?

Aperture unable to connect to photo stream

Aperture 3 and Photostream were working fine for me but now it's not. I think this started happing after Apple replaced the logic board and video card in my 2008 iMac. I'm using Lion and all software is fully up to date. I have photostream enabled in the mac icloud settings and turn it on in the aperture settings. It spins for a while and then says "aperture was unable to connect to photo stream", which also then disables photo stream in the icloud settings. I have uninstalled Aperture and all prefrences files using AppCleaner and reinstalled. I have also done some tricks which others have reported as working, such as logging out of icloud and then logging in as a different user and deleting preference files from ~/Library. I have also tried creating a fresh Aperture library. So far nothing has worked. If I look at the console I get a crash log caused by the PhotoStreamAgent that contains the following:
Process:         PhotoStreamAgent [1239]
Path:            /Applications/Aperture.app/Contents/Library/LoginItems/PhotoStreamAgent.app/Con tents/MacOS/PhotoStreamAgent
Identifier:      com.apple.photostream-agent
Version:         2.0 (2.33)
Build Info:      PhotoAgent-2033000000000~12
Code Type:       X86-64 (Native)
Parent Process: launchd [132]
Date/Time:       2012-01-09 19:49:26.382 -0500
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
objc[1239]: garbage collection is OFF
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive version (4294967295)'
*** First throw call stack:
          0   CoreFoundation                      0x00007fff955b9286 __exceptionPreprocess + 198
          1   libobjc.A.dylib                     0x00007fff93512d5e objc_exception_throw + 43
          2   CoreFoundation                      0x00007fff955b90ba +[NSException raise:format:arguments:] + 106
          3   CoreFoundation                      0x00007fff955b9044 +[NSException raise:format:] + 116
          4   Foundation                          0x00007fff93af46ef -[NSKeyedUnarchiver initForReadingWithData:] + 2611
          5   Foundation                          0x00007fff93b2364e +[NSKeyedUnarchiver unarchiveObjectWithFile:] + 129
          6   CoreMediaStream                     0x00000001001ccbb0 -[MSCupidStateMachine initWithPersonID:] + 380
          7   CoreMediaStream                     0x00000001001b117d -[MSSubscriber initWithPersonID:baseURL:] + 57
          8   CoreMediaStream                     0x00000001001b0916 +[MSSubscriber subscriberForPersonID:] + 178
          9   CoreMediaStream                     0x00000001001a7e5c -[MSMediaStreamDaemon _boundSubscriberForPersonID:] + 43
          10 CoreMediaStream                     0x00000001001a85d0 -[MSMediaStreamDaemon pollForSubscriptionUpdatesForPersonID:] + 48
          11 PhotoStreamAgent                    0x0000000100003c3b -[AssetManagementDaemon startDaemon] + 491
          12 PhotoStreamAgent                    0x00000001000036c7 -[AssetManagementDaemon run] + 151
          13 libdispatch.dylib                   0x00007fff9232b224 dispatch_once_f + 53
          14 PhotoStreamAgent                    0x0000000100002d8c +[AssetManagementDaemon run] + 124
          15 PhotoStreamAgent                    0x0000000100001f73 main + 67
          16 PhotoStreamAgent                    0x0000000100001f24 start + 52
terminate called throwing an exception
abort() called
When I switch to Aperture on my old black Macbook photostream works fine. I'm stumped and frustrated. Short of wiping my drive and reinstalling the OS, does anyone have any thoughts on this? Thanks in advance.
Spencer

Well if this just started happening since the iMac was worked on by Apple you should contact Support. You should still be under warranty for the repair so they should take care of it.
regards

Just downloaded aperture 3.4 update for the app store and now it wont open please help!!

just downloaded aperture 3.4 update for the app store and now it wont open please help!!

Just want to echo this complaint.
I have tried re installing Aperture 3 and I've looked for preferences or something to clear, but nothing helps. It continues to crash each time I open it no matter what.

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Everytime I purchase using iTunes on my home computer it asks me to verify my c/card, and states "Your Apple ID, ..., was just used to purchase ... from the iTunes Store on a computer or device that had not previously been associated with that Apple ID.

When i use my laptop to make an iTunes store purchase, it always asks me to verify my account details by entering my credit card verification number. After i do this i then receive an email stating "Your Apple ID, ..., was just used to purchase ... from the iTunes Store on a computer or device that had not previously been associated with that Apple ID."
My Laptop is my home device and apart from purchasing app's on my iphone 4, i only use my laptop to make itunes purchases.

I'm having a similar problem. I had previously (over a year ago) purchased 2 episodes of Law & Order. Then about 2 months ago, I purchased the 3rd season of Sons of Anarchy. When I downloaded these episodes to my iPad, about a dozen full seasons of various shows popped up, too. No money was removed from my iTunes account & theses particular shows aren't in my iTunes library on my desktop. I've tried every which way to delete them from my ipad, but can't. I went to the Apple store & they suggested I contact expresslane.apple.com for help. I submitted my problem, via email Friday, as they asked, but have not received any response. Any suggestions on how to get rid of these "phantoms?".

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

My daughter is currently using my Apple ID with her ipod touch. I will be upgrading her to an iPhone 4S and would like to use a differnt Apple ID and a new computer and still keep all the current music and apps that she has now. How do I do this?

My daughter is currently using my Apple ID with her ipod touch. I will be upgrading her to an iPhone 4S and would like to use a different Apple ID and a new computer and still keep all the current music and Apps that she has now. How do I do this?

Make a new Apple ID for her.
Use it on her iPhone 4S for iCloud, iMessage and FaceTime.
Use your ID on her iPhone 4S for iTunes and App Stores.
Sign in with your Apple ID on iTunes Store (on iTunes app of her new computer)
Authorize her new computer with your Apple ID in iTunes (iTunes menu>Store>Authorize this Computer)
Check "Share my Library on my Local Network" in iTunes Preferences in your and her computer
Sign in Home Sharing of her iTunes with your Apple ID.
Copy all the Music she wants from the old computer to the new one. (Must be on the same network)
Copy all the apps she wants from the old computer to the new one. (Must be on the same network)
Export all playlist as xml files from the old computer to the new one.(right click on the playlist to export and "File>Library>Import Playlist to Import)
Sync her iPhone 4S with all content she wants from her new computer (all data from the old computer will be deleted)
Are you sharing Contacts or other data from iCloud?
Be careful or ask for help about moving from iCloud account to another one.

I have a new PC and I am getting the message "The iTunes Library File cannot be saved. You do not have enough access privileges for this operation." I am the only one using this PC and I have Windows 7 Pro and have an administrator account. Help

Can anyone help me with this problem. ITunes message," The iTunes library file cannot be saved. You do not have enough access privileges for this operation." I have administrator account and transferred files from old PC. I downloaded new iTunes program on new PC. I synced my iPhone to new PC, no problem. I deleted old account after indicating shared files to new admin account. Can anyone help?

A belated reply, as the problems itunes has have discouraged me from using it much. If you uncheck the "read only" box, it doesn't stay that way! Next time you use it, the box comes up checked.
I'm still having that problem, even when I open iTunes as administrator.
I've yet to see the answer to this problem. I use itunes mostly to download audiobooks, and I'm ready to download more, and want to save them!

Hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen

hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharan

Welcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html

How to use a Text View to show the current user

Hi Experts,
I am using a Text View to show the current logged on user.
Also i need to retrieve the date of creation of proposal and show it as output parameter.
I am using the following code but it is not working properly.
Please help me out regarding the same.
Method technicalDescription()
//Attribute User to store user name
IGPAttributeInfo user = output.addAttribute("USER", IGPAttributeInfo.BASE_STRING);
            user.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
//Attribute date to store current system date
IGPAttributeInfo date = output.addAttribute("DATE", IGPAttributeInfo.BASE_DATE);
            date.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
Method execute()
//getting current system date
Date currDate = new Date(System.currentTimeMillis());
          contextElement.setDate(currDate);
//Retrieve Current User Details
try {
IWDClientUser user = WDClientUser.getCurrentUser();
String firstName = user.getFirstName();
String lastName = user.getLastName();
String userName = lastName + " " + firstName;
contextElement.setUserName(userName);
} catch (WDUMException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
Method complete()
output.setAttributeValue("USER", wdContext.currentContextElement().getUserName());
output.setAttributeValue("Date", wdContext.currentContextElement().getDate());
Thanks a lot.
Cheers
Gaurav Raghav

There are a few ways, for example declare an IBOutlet for the text field and then use it with NSControl's stringValue: method (inherited by the NSTextField), or bind the value of the text field to a property, etc. What have you got so far?

How to use a Text View to show the current user in WDJ

Hi Experts,
I am using a Text View to show the current logged on user.
Also i need to retrieve the date of creation of proposal and show it as output parameter.
I am using the following code but it is not working properly.
Please help me out regarding the same.
Method technicalDescription()
//Attribute User to store user name
IGPAttributeInfo user = output.addAttribute("USER", IGPAttributeInfo.BASE_STRING);
user.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
//Attribute date to store current system date
IGPAttributeInfo date = output.addAttribute("DATE", IGPAttributeInfo.BASE_DATE);
date.setMultiplicity(IGPAttributeInfo.MULITIPLICITY_1_1);
Method execute()
//getting current system date
Date currDate = new Date(System.currentTimeMillis());
contextElement.setDate(currDate);
//Retrieve Current User Details
try {
IWDClientUser user = WDClientUser.getCurrentUser();
String firstName = user.getFirstName();
String lastName = user.getLastName();
String userName = lastName + " " + firstName;
contextElement.setUserName(userName);
} catch (WDUMException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
Method complete()
output.setAttributeValue("USER", wdContext.currentContextElement().getUserName());
output.setAttributeValue("Date", wdContext.currentContextElement().getDate());
Thanks a lot.
Cheers
Gaurav Raghav

You can use a text string as the reference.
If you use the VISA Find Resource function, it will return an array of strings which you can index in your code, and store either the index, or store the string itself. You can even use strings like COM1 and COM2, assuming those ports are available.
The challenge is when you move from one machine to another, where the serial ports may be different on the other machine.
Message Edited by LabViewGuruWannabe on 01-07-2008 06:33 AM
Message Edited by LabViewGuruWannabe on 01-07-2008 06:37 AM
Attachments:
VISA find.png ‏5 KB

Just recently getting error message when downloading podcasts. Says "The iTunes Library file cannot be save. You do not have enough access privileges for this operation." Doesn't happen every time. Using Windows 7. What can I do?

Just recently getting error message when downloading podcasts. Says "The iTunes Library file cannot be save. You do not have enough access privileges for this operation." Doesn't happen every time. Using Windows 7. What can I do? The files seem to be there but I don't know if they are being backed up to cloud.

Hi, DickmoAZ.
Thank you for visiting Apple Support Communities.
This sounds like a permission issue most likely with the iTunes Media folder. Here is an article that will help you troubleshoot this issue.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Cheers,
Jason H.

Just installed IOS 8 to iphone 5 and cannot connect to WI FI. Sometimes connects and when I begin to use the phone ot drops out.

Just installed IOS 8 to iphone 5 and cannot connect to WI FI. Sometimes connects and when I begin to use the phone ot drops out.
I have attempted all the regular trouble shoots such as resets, complete restore and reinstallation of ios 8. no change.

I don't have an answer for you but from my experience iOS WiFi syncing has always been a hit and miss affair (more miss than hit I'm afraid). I have gotten to the stage where I rarely use the WiFi sync. It is just quicker, easier and much less stressful to use the USB cable. I am having the same issues with all the iOS devices in our family which includes various models of iPhone, iPad and an iPod Touch and have been having them since WiFi syncing was introduced (in iOS5 ???). And then I have not even mentioned my favorite iTunes syncing messages: "Waiting for items to copy" and "Waiting for changes to be applied"!
iTunes is always extremely quick and eager to pick up the devices but as soon as I click on sync it shows "Looking for iDevice" and then the device disappears. I have found that initiating the sync from the Settings app on the device prevents this issue.
It does however seem as if it is worse with Windows 7. I did not have so many issues with my previous Windows Vista PC.
Sorry I cannot be of any help.

I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download

I downloaded and installed Lion on an external hard drive using my laptop which is running Snow Leopard I have now decided that I want to install Lion on my Laptop, but when I go to the App store and click on my purchases it will not download again

Thanks Dirk,
Tried your suggestion various ways but it had no effect the download button was still greyed out and the install button would not activate will keep trying to find a solution. I dont want to boot from the external hard drive that has Lion on mainly because it is a usb HD and the connection to my wireless modem slows the connection rate and downloading would take about ten hours

HT4906 i am using aperture 3.3.2 on the current os and cannot connect to photo stream, why not

Similar Messages

Maybe you are looking for