HT4906 My photos just recently stopped transferring vis iCloud to my Mac. Is anyone else having this issue?
My phots recently just stopped transferring to Mac via icloud. Is anyone else having this issue?
I just upgraded iPhoto and OSX to the most recent versions (9.4.3 and 10.8.4) and am also having Photo Stream problems. Did you just do software update also? Now I can't get Photo Stream to work properly and it is completely bogging down my iPhoto. My only temporary solution is to totally log off of iCloud - fixes the problem of my iPhoto bogging down but obviously also turns off my Photo Stream. Please post again if you get it figured out.
Similar Messages
-
I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?
Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"
-
We have recently started using ID CC 2014 and recently have been having Crashing issues stating the network connection was lost. Anyone else having this issue?
I will try that.
This is a copy of the error we are getting -
my apples messages is crashing? it just started, and i have updated my macbook, but still.... anyone else having this issue??
Hi,
Go to the Applications folder.
Highlight Messages
Do a Get Info (See File Menu for Keystrokes)
Change it from Opening in 32Bit mode to an unticked box (64bit mode)
Restart Messages
9:02 PM Tuesday; March 13, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My sounds occasionally stops working after upgrading to iOS 6. Is anyone else having sound issues with iOS 6 or greater?
I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back.
-
Installed 10.5 and when I go to my libary list to click open the selcted name (recently played, purchased, videos and etc.) I get a "restricted symbol" and it won't open. I have to open in a totally different way now. Anyone else having this problem? Can figure out what happened!!
1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422] -
The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.
Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
-
I have already swapped this phone out once for a new I phone 6. First one I was having same issues with.
Now I got the new one and it was good for about a month and now its doing it to but worse. It freezes completely.
Won't let any of my text messages get through to me. All my messages disappear completely and randomly come back when they feel like it.
This time its frozen where I can't even read any texts or get any texts and when I click on the messenger app it just goes to the NEW MESSAGE and won't let me get out of this screen. Should I once again take this back? or are all the iPhone 6's bad like this?It's not the iphones, it's more likely one or more of your programs causing this issue. It's not the iPhone 6's. The possibility of you getting 2 bad iphones from different batches is extremely remote or you have the worst luck on the planet. lol If one iPhone has it, then you get a new one and the same problem comes up again, it's most likely due to an issue with a program that you keep getting back from restoring an old backup. Restore the iphone again and set up as a new iphone. Then manually import your music and your photos. Once that's done, try to use your iphone to see if everything is ok. If it works good for a few days, then try to add some of the apps. At some point, you'll end up loading the malicious app and the problem may come back. Make sure that the apps are all updated. If you still have problems, call Apple so that they can run a diagnostic report and find out which app is causing this issue. Then you can simply delete it and/or update the app. More solutions are available but that's all I will post for now.
-
I click the music Icon, then chose "my top rated" playlist. Then my covers just started scrolling and wouldn't stop even if I selected the back or forward arrows. Then I tried going back to the main menu in music and it won't do that, its like it is stuck. Just curious if anyone else has experience the same issue and what fixed it. Guess I could reset my phone. I have only had it for 3 weeks now.
I had the exact same problem.. and thank you for the answer..
It actually makes sense, but I had the 'bouncing camera' problem and never thought of the 'slide'..
Dohhhhh
cheers for the post -
I have an Iphone 5s, touchpad was working perfectly fine with IOS 7, but ever since I got the IOS 8 update the touchpad has not been working.
All Macs come with a one year limited warranty.
If you purchased AppleCare, contact info > http://www.apple.com/support/products/
Why can't you use the Bluetooth keyboard?
According to the link I posted for the AHT..
"For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead." -
Subject kind of states it all. Tried throwing out the preferences a few times, restarts, disc permission fixes- no luck.
New iTunes (10.6) crashes at start/ launch.fanghorn wrote:
I am unable either to delete iTunes 10.6 or to restore 10.5.3 from backup over it. Each effort is greeted with this message:
"iTunes cannot be deleted or modified. It is requred by OS X."
Is there a way around this "feature"?
Select iTunes in a Finder window.
Right click - Get info.
Scroll to Sharing & Permissions, adn set you to Read & Write. This will allow you to delete it. -
I have a new but 2010 model. It operates very slow and has gray screen occassionaly. One store said it's "safe sleep", the other graphic board. Is anyone else having this problem with computer only 4 mos. old?
Your problems may be caused by software or hardware, including the gray screen and the slowness. The intermittent gray screen is a puzzler and probably is hardware. TUSL2C’s diagnosis may be right on the money. A question is how to isolate it to HW or SW that so you can get good service?
The obvious cheap and easy fix is to replace that cable but I don’t think you can do that because it is under warranty. There are other ways to isolate the problem that won’t void the warranty.
If the disk turns out to be healthy and it continues to boot to a gray screen then that will be a sign that internal hardware, other than the disk, is to blame. Since they are blaming it on software we will be able to test it with a pristine OS X installation that has no 3rd-party software to blame.
> They are calling it "Safe Sleep Mode" and that happens if I don't use the machine within 4 hours.
The machine should go to sleep and wake up almost instantly every time without a gray screen. If you can demonstrate the problem reliably by putting it to sleep and waking it up then that will be most useful. We will show it failing on pristine OS X software without 3rd-party mods to prove it is an Apple problem. Similarly if you can reliably show the gray screen from a power-on boot that will help.
My first question is do you have a current Time Machine (or other) backup? If not you should create one before we get to steps that could stress the disk. If it is a faulty cable or a faulty disk then the system could stop functioning at any time. It is always prudent to maintain a current backup and especially important when the system is sick. If you do not have a Time Machine (or other) backup then post back for instructions on how to create one.
In the mean time please download and run Etrecheck and post back the results.
http://www.etresoft.com/etrecheck
This will indicate possible software compatibles and other details that may be helpful in a diagnosis.
Also run disk diagnostics with Disk Utility. This will check if the disk and filesystem are healthy.
From the Finder, pull down on the Go menu to Utilities. This will open the Applications > Utilities folder.
Then run Disk Utility.
Click on the upper left disk icon.
Does the S.M.A.R.T. status say “Verified”.
If not the disk/SSD is unhealthy and needs to be replaced.
Click on the icon indented below, usually called “Macintosh HD”.
Verify Disk.
If it finishes with a green “OK” message then all is well with the disk.
If it shows errors in red then you may have found a problem.
Click on Repair Disk Permissions.
It will give lots of messages in black and white, which are OK.
If it gives any messages in red then there is an issue to address.
It will be useful to have some test that shows the slow speed that uses standard OS X applications such as Pages, Numbers, Presenter, iTunes, iMovie... or even just the Finder opening windows or starting applications. We can then use that test when isolating the source of the slowness.
How many seconds does it take to boot from power-on to either the login screen or the Finder is up? Please time that. It is a good speed test. If it is over a minute then something is wrong.
One way to isolate the issues will be to sandbox it using another disk to test what happens with different software on different hardware disks in different locations. That will not void the warranty.
But before going there or proceeding further let’s look at the Etrecheck and Disk Utility results, ensure the system is backed up, and then try some other standard tests. -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
I recently updated to the newest version of Flash (17.0.0.134) and I have a MacBook Air, running OS X and I have Safari version 8.0.4. Ever since the update I can no longer select drop down menus or get Netflix to run properly. Has anyone else had this issue/know how to resolve it?
1. System Preferences > Flash Player > Advanced > Delete All
Press “Delete All” button under “Browsing Data and Settings”.
2. Install Adobe Flash Player.
System Preferences > Flash Player > Updates
Press the “Check Now” button.
http://get.adobe.com/flashplayer/
Download it and quit Safari from Safari menu in the menu bar.
Follow the prompts to install Adobe Flash Player. -
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
Maybe you are looking for
-
How to get the returned value from Functions with Callable statement?
I was glad to find that stored procedures can be invoke with Java class code by the object of Callable statement like : String stmt = "BEGIN departments_pkg.do_select(?,?,?); END;"; and getting the output variables by populateAttribute(DEPARTMENTNAME
-
Dear Guru's We are running 4.6C PP and MM along with SD,WM FI etc, and I have been asked if the following is possible. We purchase an Kit of of materials from a Vendor (3 items) that they consider to be one material, but when we receipt the item we w
-
Yesterday I had no problems sending messages, but this morning when I tried to send an email, the "Send" button is grayed out, not allowing me to send any messages. I tried changing the recipient, but it's grayed out on any message that I try to send
-
Migration of update rules to transformations
Hi Experts, We are in process of migrating update rules to Transformations. We have following data flow for one info cube. *Existing* Data source - >transfer Rules--->info source->update rules-- >cube New Data source - >transformations---- >cube When
-
Delay in prting HP laserjet 1200
JUst recently upgraded computer from windows XP. The new machine has windwos 7 64 bit. Trying to use my HP Laserjet 1200, and there is a long delay in printing anything. This dealy is anywhere from 30 seconds to a minute. I can watch the little gree