HT4910 Am I able to backup and restore document files developed in microsoft programs (eg excel & word) to icloud??

Am I able to backup  & restore microsoft excel & word files from my PC onto iCloud??

iCloud only backs up mobile devices not computers.
Allan

Similar Messages

  • Backup and restore Root File system

    Hi
    Can I take backup of Root File system using ufsdump and later restore it (Root file system) completely using ufsrestore?
    Please give me the steps or a link
    Thanks in advance
    Ashraf.

    In short yes. But the steps depends on where you are going to store the backup and if you are running Sparc or x86 and what you do with your disk in between.
    Boot in single user.
    example# ufsdump 0cfu /dev/rmt/0 /dev/rdsk/c0t3d0s0
    /dev/rmt/0 (tape) can be another partions file /backup/root_backup
    For restore it must be safeest to boot from CD.
    Mount your disk to restore to under /a
    cd /a
    ufsrestore rf /dev/rmt/0 (or your file /backup/root_backup)
    If the partition is reformatted you may have to install new bootblocks.
    Please read some from docs.sun.com
    This is just an advice, not detailed workorder.....
    /Gunnar

  • DMV to get Backup and Restoration complete percentage

    hi all,
      Any DMV to get Backup and Restoration complete percentage in SSAS Database like what we have sys.dm_exec_requests in OLTP.
    Thanks

    Hi Devbi,
    According to your description, you want to get Backup and Restoration complete percentage by using DMV, right?
    Analysis Services DMV are query structures that expose information about local server operations and server health. The query structure is an interface to schema rowsets that return metadata and monitoring information about an Analysis Services instance.
    All the DMV are list on the link below, and based on my research, there is no such a DMV that return the Backup and Restoration complete percentage.
    http://msdn.microsoft.com/en-us/library/hh230820.aspx
    If you have any concern about this behavior, you can submit a feedback at
    http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
    in the following release after official confirmation.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

    Not able to sign into Blackberry Protect.  Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID."  My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone.  I can sign into Link, Blackberry.com and Protect.  I see my device in Protect but cannot send messages or view it on a map.  Times out with cannot reach device message.  BB Protect on Device has a swirling circle beside the on/of switch.  Cannot turn off.  
    I have deleted Link and re-installed.
    I have reset phone to default(factory) and signed in. 
    OS level is 10.2.1.3062
    BB Link is 1.2.3.56
    Solved!
    Go to Solution.

    I managed to figure this out myself. I had to delete the device from the Blackberry Protect website.  protect.blackberry.com.  I wiped my device again and signed in with my Blackberry ID.  I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete.  Restore is in progress for me!

  • 2013 Backup and Restore

    When I go to my backup and Restore and check the job status it tells me there is a backup in progress:
    A backup or restore is currently in progress
    How do I reset this as there is no backup that I have run for some time?

    Hi, 
    According to your post, my understanding is that the job status still shown “A
    backup or restore is currently in progress”.
    Did you delete a old search application and recreate a new one before?
    If so, maybe the old object is still existing in SQL, you can used the following stsadm command:
    Stsadm -o deleteconfigurationobject -id “object GUID”
    To find the object GUID, simply go into Central Admin - Manage Service Applications and highlight the offending legacy service application (Search Service
    Application in the case). You should now be able to see the GUID in the IE address bar. Run the command above, and try your backups again and all should be well.
    For more information:
    http://imperfectit.blogspot.com/2010/06/sharepoint-2010-farm-backup-fails.html
    There is a similar thread for your reference.
    http://social.technet.microsoft.com/Forums/en-US/0310b061-ea1c-4576-bb74-a02f5e04a3a0/backup-job-stuck-in-process-in-backup-and-restore-job-status?forum=sharepointadminprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

    I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

    An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
    The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer:  Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • Ideas for Providing User Level Data Backup and Restore

    I'm looking for ideas for implementing a user level application data backup and restore in an Apex app.
    What would be great is to have a user be provided an export file and a way to import this file. A bit overkill but hopefully never needed.
    Another option that is perfectly doable is a report that simply provides a means to create an export of the data. Since I already have an interface I can use an export to interface an export.
    Any thoughts?
    Hopefully I'm missing something already there for an end user to use.

    jlincoln wrote:
    "Do you mean "export" and "import" colloquially, or in the specific sense of the exp/imp/datapump utilities?"': I mean as in imp/exp Oracle utilities. Generally speaking, it would be neat to be able to export and import via an Apex an application. In this hosted environment I don't have that access but would this be a bad idea if you don't care about the existing data in the schema in which the data resides?I can envisage a mechanism using <tt>exp/imp</tt>, but since it requires <tt>dbms_scheduler</tt> external jobs and access to the file system it's highly unlikely to be possible in a hosted environment. (Unless you're doing the hosting?)
    Backup: Necessary for piece of mind and flexibility. I am working on a VB/Access user who does this today to get to the point when they can be comfortable with the backups occurring regularly and by the hosting site's DBA group.
    Restore: Like I said. I am working on a VB/Access user who does this today to get to the point when they can be comfortable with the backups occurring regularly and by the hosting site's DBA group. This is a very small data set. A restore would simply remove existing data and replace it with the new data.My opinion is that time would be better spent working on the user rather than a redundant backup and restore feature. Involve them in a disaster recovery exercise with whoever is hosting the environment to prove that their data is safe. Normally the inclusion of data in regular, effective database backups is sold as a major feature of APEX solutions.
    "What about security/privacy when this data ends up in uncontrolled environments?": I don't understand the point of this question. The data should not end up in uncontrolled environments. Just like the data in the database or its backups.Again, having data in a central, shared location protected by multiple levels of application, database, and OS security is usually seen as a plus for APEX over VB/Access. Exporting the data in toto to a PC/laptop that can be stolen or lost, and where it can be copied to USB drives/phones/email loses this protection.
    User Level: Because the end user must have access to the backup and restore mechanisms of the application.
    Application Data: The application data. Less than 10MB. Very small. It can be exported in a flat file downloaded by the end user. This file can then be used to upload and import via an existing application interface. For example.
    "I'm struggling to parse this for meaning.": When I say I have an existing interface I am referring to a program residing in the Apex application that will take data from a flat table structure (i.e. interface table), validate the data, derive data, and load into the target table structure.Other than the report export capability linked to above, there's nothing built-in to APEX that comes close to your requirement. If the data is simple enough that it can be handled in such a report, and you have a process that can read and recreate this export, then you have your backup/restore capability. If the data can't be handled in a simple report, then you'll need a more complex PL/SQL process to generate the file.

  • Backup and restore a olite database.

    Hi,
    i would like to know, if is it possible to backup and restore a olite database on a MUC (mobile unite computer).
    Is there a war we can export/import, datapump or generate a xml file and put it back in the database on demand.
    Some clients can be more then two weeks between a synchro. We would like to backup the database on the MUC itself incase of a corruption and be able to restore it, and do the syn before the corruption or problem append.
    We are just looking for a solution and not lost any data upadte or insert by the client (not do a complet refresh before the crash).
    Thanks
    Ron

    The Oracle Database Lite Load Utility (olload) enables you to load data from an
    external file into a table in Oracle Database Lite, or to unload (dump)
    data from a table in Oracle Database Lite to an external file. Please see the Client Guide in Oracle Lite 10.3.0.2.0

  • Backup and Restore VM

    I have a host server that has a C: drive and a D: drive. Right now I only have one VM running and it is located on the D: drive. I need to reformat the disk that the D: drive is on. For some reason it was created as a MBR type disk and I
    need to delete it and recreate it as a GPT disk so that I can extend the D: partition beyond 2TB. So, what is the best way to backup and restore the existing VM in this case?

    I'm not really sure what you are referring to as an import/export but I'm going to assume its something along the lines of copying the data to 1 drive, then copying the data back to another drive. Doing a file based backup and recovery would do the same
    thing.  I don't particularly like doing stuff like copy and pastes to move data (especially important data) bc there is no guarantee copy and paste actually copied everything (no logging of what it actually did) and there are alot of things that can happen
    during the copy (disk latency, network latency) that may cause data to be lost (delayed write failures).  With any good backup program you should be able to run a report for what files it actually backed up and what files failed to backup and the reason
    they failed to back up.  Same applies to restores.  Also I have seen issues where a simple copy and paste strips certain special attributes from the file.
    If file based backup/restore is not an option, then maybe a robocopy of the data would be the best solution.  I'm pretty sure using /b /copyall api should get everything as well.  And you can add a /v switch to it to get some logging.

  • Backup and restore buttons not working

    Hi,
    Any button in my backup and restore centre with a shield next to it (for UAC) is not working. Identical to this thread:
    https://social.technet.microsoft.com/Forums/windows/en-US/6a138e65-2834-41ac-bd40-c2344e20b824/backup-and-restore-panel-buttons-not-working
    A fair way down that page, Lokesh replies but I don't have any of the software that he mentions in his post. Is anyone able to help?

    Hi,
    According to the Lokesh's reply, this problem is probably caused by 3rd plugin in Windows Explorer Shell. UAC dialog couldn't be prompt correctly.
    To resolve this problem, you can try to use ShellExViewer instead to make troubleshoot, please follow the content of the link below for more details:
    https://social.technet.microsoft.com/Forums/windows/en-US/5353106e-5b19-4a26-8446-72bedf40b169/rightclick-context-menu-in-desktop-appearing-slow-win-81?forum=w8itprogeneral
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Backup and Restore not working or am I missing something??

    I installed the Desktop Manager primarily to be able to save the info on my computer.  Only problem is when I go to Backup and Restore the button that allows me to backup (or restore) is not highlighed so it's not allowing me that option.  All it will allow me to access is the 'advanced' and 'options button' on the Backup and Restore window. I don't want to lose all my info again if the phone crashes so please HELP!  And it took me about 10 tries before the Desktop Manager successfully loaded on my computer so not sure if the problem was in the installation but when I look at the Desktop Manage window it shows 'disabled' and also doesn't allow me to choose any of the options on the bar at the top.  How do I enable this program??  When I tried loading the disk I got some message about now being able to run Adobe scripts so not sure if that might be part of the problem.
    Solved!
    Go to Solution.

    Just realized that I had the backup and restore window open when I wrote the above post and when I closed that the window for the Desktop Manager did allow me to access the toolbar at the top but the Desktop Manager is still disabled.

  • Grant permission - backup and restore

    Hello Everyone,
    Please help. I would like to give permission for the domain user to a particular database in SQL Server 2014 so that it can perform backup and restore it. User should take SQL Management Studio (local) to perform backup and restore.
    My user is granted the following roles: dbcreator, public, sysadmin (I know it is weak), and has privileges on the SQL Server backup directory. What should be improved?
    Thank you for your help.

    >> I would like to give permission for the domain user to a particular database 
    You can't control the permission level once the user granted higher permission in security hierarchy.
    Backup
    BACKUP DATABASE and BACKUP LOG permissions default to members of the sysadmin fixed
    server role and the db_owner and db_backupoperator fixed
    database roles.
    https://msdn.microsoft.com/en-us/library/ms186865.aspx
    Restore
    https://msdn.microsoft.com/en-us/library/ms186858.aspx
    If the database being restored does not exist, the user must have CREATE DATABASE permissions to be able to execute RESTORE.
    If the database exists, RESTORE permissions default to members of the sysadmin and dbcreator fixed
    server roles and the owner (dbo)
    of the database (for the FROM DATABASE_SNAPSHOT option, the database always exists).
    --Prashanth

  • Error code 1,iphone backup and restore,now phone doesnt work at all and apple not in any hurry to solve issue,only had phone 4 mths,wish id stuck with iphone3 and never upgraded

    what a nightmare,no phone for 3 days and no sign of any positive help from apple.done backup and restore as wifi on phone stopped working,error code 1 and now phone doesnt work at all,apple say other people having problem but havent heard of anyone else,really disappointed in way apple are keeping me hanging on,phone is only 4 mths old

    My iphone is only 6 months old and I am experiencing the same problems. I have already had to have the phone swapped once with a phone that has a blown speaker. (The apple store is 2.5hours away so I havent been able to go back to replace the replacement) Since I did the ios 5 update, my phone says NO SERVICE and drops calls. It was speratic but last night, same ERROR message as you. As you know, if forces you to restore which caused me to loose valuable information and documents. insert loud profanity here _________. lol

  • I'm having problem  with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..anybody can help?

    I'm having problem  with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..Can somebody help?

    Hi Maastricht2014,
    Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
    The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
    Hope that Helps!
    ~ Arpit

  • Enable, backup and restore FCSvr in command line

    Hi All,
    Anyone know how to enable, backup and restore Final Cut Server in command line?
    Thanks,
    Spin

    First delete the /var/db/FinalCutServer/ folder and ran the Final Cut Server.dmg file to reinstall.
    Next grab your most recent backup and moved the "-" file to the desktop (this contains the database restoration script).
    Open up a command window and execute the following commands:
    cd "/Library/Application Support/Final Cut Server/Final Cut Server.bundle/Contents/Resources/sbin/"
    ./fcsvr_run psql px pxdb
    From the psql command prompt execute this command, substituting the path to your "-" database script:
    \i /Users/finalcutserver/Desktop/-
    After that finished executing I was able to start Final Cut Server and so far it looks as though everything has been restored! Fingers crossed...

Maybe you are looking for