HT4910 The copy to information of Mail is not correct!

We copied our Emails from iCloud to our computer and all Emails got lost on iCloud!

When you drag messages from an IMAP server such as iCloud to a folder under 'On My Mac' they are downloaded to that folder and removed from the server. In order not to delete them on the server you have to hold the option key while dragging (as when copying rather than moving files from one folder to another).
You could always re-upload them to a mailbox on iCloud.

Similar Messages

HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/

HT1918 i have just made my apple id.i have made this for itunes.after making my account i have problen with the review payment information as i do not use any credit cards and there is no option like NONE in review payment information. what should i do no

i have just made my apple id. i have made this for itunes. after making my account i have problem with the review payment information as i do not use any credit cards and there is no option like NONE in review payment information. what should i do now? to proceed further? plz help me!

How did you create the account ? If you followed the instructions on this page when creating it then you should have got the 'none' option : http://support.apple.com/kb/HT2534
e.g. on a computer's iTunes, if currently signed into an account then you logged out of it, and you then found a free app in the store and clicked on its free 'price' :
And then clicked on 'create Apple id' on the popup :
When I tried that process to create an account a few days ago I got the 'none' option on the payment details screen.
If you didn't use that process then you will need to create a new account using it (the instructions won't work with an existing account).

Hi, I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mail are not receiving. Mail queue showing Connection refused error. Please help me

I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRI

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Date and time mentioned in my mails are not correct.Similar date for all mails

The date and time shown in my mails are not correct for all the mails its showing 31/5/12 but these mails were received on 1/11/14.

Incorrect date or time displayed in various applications

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

The Apple Id on my phone is not correct. How do I change it?

When I go to download an app, the Apple ID on my phone is not correct. How do I change it?

follow the link
http://support.apple.com/kb/HE40

The sign-in ID or password is not correct

So I just woke up to play on my PS4, and the first thing I noticed was I was not longer signed into PSN. When I went to go sign in, it forced me to reset my password, which I did and I can log onto the playstation website just fine. However when I try to log on to my PS4 with my info, it says "The sign-in ID or password is not correct". How do I fix this? There is nothing wrong with the way I am putting in my info

See:
iOS: Troubleshooting FaceTime and iMessage activation

Is there any way to prevent the copying of text from Presenter's Notes tab?

PowerPoint Notes Page text exposed on a Presenter Notes tab can be selected and copied from the Notes tab and then pasted into any text document. Is there any way to prevent the copying of text short of not providing notes text at all?

Hi Robingo,
Excel is strictly treated as a data source and Siena only imports the data in your tables, not the formatting.
If there is some business logic behind the formatting, you could mimic the same logic in Siena. For example, the font is bold or red if a value is in a certain range, the font is in italics if the data is for a specific customer, etc.
Thanks
Robin

Can the iPhone only pull inbox mail and not all unread mail?

Yahoo correctly filters my mail into inbox and spam. The iPhone pulls ALL unread mail rather than just that from the inbox. Anyway to fix this?

What is unread except for what is in your Inbox mailbox?
Are you accessing a free Yahoo account with the iPhone's Mail client, and did you use the Yahoo account preset when creating your Yahoo account?
If so, the Yahoo account preset on an iPhone creates the account as an IMAP account with the iPhone's Mail client. With an IMAP account, the email client used to access the account keeps all server stored mailboxes for the account synchronized with the server. All messages received by the account, and available in the account's Inbox mailbox on the server, will be available in the account's Inbox mailbox with the iPhone's Mail client - which keeps the mailbox synchronized with the server. If spam is received at the server and is available in the account's Inbox mailbox at the server, the same messages will be available in the account's Inbox mailbox with the iPhone's Mail client. This is how an IMAP account works.
With a POP account, any messages that remain in the account's Inbox mailbox at the server will be downloaded when accessing the account with a new email client, and will be shown as unread when downloaded by a new email client used to access the account. This is also normal for a POP account when accessing the account with a new email client.
The iPhone's Mail client does not included a spam filter. Even if it did, new messages received at the server and available in the account's Inbox mailbox at the server will be downloaded - spam and all - which is the same for any email client.

Mail does not correctly reflect read status of Gmail IMAP messages

Apple Mail is no longer correctly reflecting the read status of emails that have been read on other devices/computers when viewing my Gmail IMAP inbox. Whereas my iPhone and Gmail account both show changes in items' read status immediately or on next mail retrieval, in Apple Mail the only way I have currently of updating the read status is to quit Mail and restart it. Neither automatic fetching of Mail, nor clicking "Get Mail", nor right-clicking the Inbox and choosing "Synchronize Gmail" work.
My other IMAP account (MobileMe) does not exhibit this behaviour, but Mail.app does this with Gmail on both of my desktop computers.
Anyone out there with a similar problem? And are there any possible solutions, or is it a bug/incompatibility with GMail?

This problem is still occurring for me in 10.5.5 - I even tested it by creating a new gmail account with only 1 message in it, in case it was a problem with large mailboxes, and the same thing happened.
Mail messages marked read elsewhere are not updated in Mail on the next send/receive. I wonder if everyone with this problem could report the bug at http://www.apple.com/support/feedback and see if we can get this solved in 10.5.6

Javax.mail attachment not correctly encoded

Hi,
I have developed an online auction system which, has a function to generate invoices using the iText libraries.
The invoices are stored as a ByteArray in a database and are mailed to the customer. This works find when running
the application within my IDE (Netbeans) on Mac OS X and Apache Tomcat 6.0.29 and javamail 1.4.3. When running the application on
Windows 2003 Server with same tomcat and javamail version the attachment is not readable on the client.
The attachment is added to the e-mail using the following code;
// Part two is the attachment
messageBodyPart = new MimeBodyPart();
messageBodyPart.setFileName(attName) ;
messageBodyPart.setDataHandler(new DataHandler(new ByteArrayDataSource(attachment,attContType)));
multipart.addBodyPart(messageBodyPart) ;
The raw e-mail of the attachment when it is correctly encoded (running from my IDE)
Content-Type: application/pdf; name=factuur_656.pdf
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=factuur_656.pdf
JVBERi0xLjQKJeLjz9MKNCAwIG9iago8PC9MZW5ndGggMzM2L0ZpbHRlci9GbGF0ZURlY29kZT4+
c3RyZWFtCnicjZPBboJAEIbvPMXcbBPEmd1lWXpr0/bWpFYOvTWoa0WQVUQPPfmofZQuaFGCNg0J
gfDtfP+fCWvnIXK4BIUSoqnzFDlDZw0EaK/DfbKEwfuM4NHAsIIHzwQkIJo5vxQJCTIIIFo6Nztd
pGYyLz8QUfryNlo0GA+owSjsE/UZEp4TPp4IpAFS9bHr4wi+UjVllpvJvEgWuyT/bLlk4KFqsDqV
WcHKopu2MfTUiUvNptT5wcouWCWrsbgok1RnIIUL0Hvbjse60DlkcVx86bx3LhCoPN4c3AMjF9ud
SdZJG8IC/vUEQnUTjF5GcJ/pooRDfuBgAyV2C/b5G/aALl10HodVAMfrTi7aTr9q/Vq9LsBspxrG
And again when encoded from the server
Content-Type: application/pdf; name=factuur_656.pdf
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=factuur_656.pdf
JVBERi0xLjQKJeLjz9MKNCAwIG9iago8PC9MZW5ndGggMzM2L0ZpbHRlci9GbGF0ZURlY29kZT4+
c3RyZWFtCnicP5PBboJAEIbvPMXcbBPEmd1lWXpr0/bWpFYOvTWoa0U/VUQPPfmofZQuaFGCNg0J
P/DtfP+fCWvnIXK4BIUSoqnzFDlDZw0EaK/DfbKEwfuM4NHAsIIHzwQkIJo5vxQJCTIIIFo6Nztd
pGYyLz8QUfryNlo0GA+owSjsE/UZEp4TPp4IpAFS9bHr4wi+UjVllpvJvEgWuyT/bLlk4KFqsDqV
WcHKopu2MfTUiUvNptT5wcouWCWrsbgok1RnIIUL0Hvbjse60DlkcVx86bx3LhCoPN4c3AMjF9s/
SdZJG8IC/vUEQnUTjF5GcJ/pooRDfuBgAyV2C/b5G/aALl10HodVAMfrTi7aTr9q/Vq9LsBspxrG
Both attachments have the same length, and are similar (but are exactly the same).
In the third line of the correctly encoded attachment the characters are; "gf" which are
encoded in the not correctly encoded attachment to "P/".
Also setting "-Dmail.mime.multipart.bmparse=false" did not make any difference.
Any ideas, suggestions, solutions ?
Cheers
Peter

Have you verified that the input byte array has the same contents in both cases?
Is it possible that your server is picking up a different version of JavaMail?

Management API - Create VM - InvalidXmlRequest - The request body XML was invalid or not correctly specified

Hi,
I am getting error while creating virtual machine from Azure REST management API. Could someone please point me what wrong I am POSTing in below XML
ERROR ---
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Code>InvalidXmlRequest</Code><Message>The request body's XML was invalid or not correctly specified.</Message></Error>
" <Deployment xmlns=\"http://schemas.microsoft.com/windowsazure\" xmlns:i=\"http://www.w3.org/2001/XMLSchema-instance\">" +
" <Name>SomeName</Name>" +
" <DeploymentSlot>Production</DeploymentSlot>" +
" <Label>SomeLabel</Label>" +
" <RoleList>" +
" <Role>" +
" <RoleName>SomeRoleName</RoleName>" +
" <RoleType>PersistentVMRole</RoleType>" +
" <ConfigurationSets>" +
" <ConfigurationSet i:type=\"WindowsProvisioningConfigurationSet\">" +
" <ConfigurationSetType>WindowsProvisioningConfiguration</ConfigurationSetType>" +
" <ComputerName>SomeCompName</ComputerName>" +
" <AdminPassword>Admin098</AdminPassword>" +
" <EnableAutomaticUpdates>true</EnableAutomaticUpdates>" +
" <ResetPasswordOnFirstLogon>false</ResetPasswordOnFirstLogon>" +
" </ConfigurationSet>" +
" <ConfigurationSet i:type=\"NetworkConfigurationSet\">" +
" <ConfigurationSetType>NetworkConfiguration</ConfigurationSetType>" +
" <InputEndpoints>" +
" <InputEndpoint>" +
" <LocalPort>3389</LocalPort>" +
" <Name>RemoteDesktop</Name>" +
" <Protocol>tcp</Protocol>" +
" </InputEndpoint>" +
" </InputEndpoints>" +
" </ConfigurationSet>" +
" </ConfigurationSets>" +
" <OSVirtualHardDisk>" +
" <DiskName>SomeDiskName-0-20121007173943</DiskName>" +
" <MediaLink>http://portalvhdsrx7q659n2n5j2.blob.core.windows.net/public/myvhd0008980.vhd</MediaLink>" +
" <SourceImageName>MSFT__Win2K8R2SP1-Datacenter-201208.01-en.us-30GB.vhd</SourceImageName>" +
" </OSVirtualHardDisk>" +
" <RoleSize>Small</RoleSize>" +
" </Role>" +
" </RoleList>" +
" </Deployment>"I have tried adding admin user name as well to the xml but still get same error.Please suggest

the format of the request body is:
<Deployment xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Name>name-of-deployment</Name>
<DeploymentSlot>deployment-environment</DeploymentSlot>
<Label>identifier-of-deployment</Label>
<RoleList>
<Role>
<RoleName>name-of-the-virtual-machine</RoleName>
<RoleType>PersistentVMRole</RoleType>
<VMImageName>name-of-vm-image</VMImageName>
<ConfigurationSets>
<ConfigurationSet i:type="WindowsProvisioningConfigurationSet">
<ConfigurationSetType>WindowsProvisioningConfiguration</ConfigurationSetType>
<ComputerName>name-of-computer</ComputerName>
<AdminPassword>administrator-password</AdminPassword>
<EnableAutomaticUpdates>enable-updates</EnableAutomaticUpdates>
<TimeZone>time-zone</TimeZone>
<DomainJoin>
<Credentials>
<Domain>domain-to-join</Domain>
<Username>user-name-in-the-domain</Username>
<Password>password-for-the-user-name</Password>
</Credentials>
<JoinDomain>domain-to-join</JoinDomain>
<MachineObjectOU>distinguished-name-of-the-ou</MachineObjectOU>
</DomainJoin>
<StoredCertificateSettings>
<CertificateSetting>
<StoreLocation>LocalMachine</StoreLocation>
<StoreName>name-of-store-on-the-machine</StoreName>
<Thumbprint>certificate-thumbprint</Thumbprint>
</CertificateSetting>
</StoredCertificateSettings>
<WinRM>
<Listeners>
<Listener>
<Protocol>listener-protocol</Protocol>
</Listener>
<Listener>
<CertificateThumbprint>certificate-thumbprint</CertificateThumbprint>
<Protocol>listener-protocol</Protocol>
</Listener>
</Listeners>
</WinRM>
<AdminUsername>name-of-administrator-account</AdminUsername>
<CustomData>base-64-encoded-data</CustomData>
</ConfigurationSet>
<ConfigurationSet i:type="LinuxProvisioningConfigurationSet">
<ConfigurationSetType>LinuxProvisioningConfiguration</ConfigurationSetType>
<HostName>host-name-for-the-virtual-machine</HostName>
<UserName>new-user-name</UserName>
<UserPassword>password-for-the-new-user</UserPassword>
<DisableSshPasswordAuthentication>password-authentication</DisableSshPasswordAuthentication>
<SSH>
<PublicKeys>
<PublicKey>
<FingerPrint>certificate-fingerprint</FingerPrint>
<Path>SSH-public-key-storage-location</Path>
</PublicKey>
</PublicKeys>
<KeyPairs>
<KeyPair>
<FingerPrint>certificate-fingerprint</FinguerPrint>
<Path>SSH-public-key-storage-location</Path>
</KeyPair>
</KeyPairs>
</SSH>
<CustomData>base-64-encoded-data</CustomData>
</ConfigurationSet>
<ConfigurationSet>
<ConfigurationSetType>NetworkConfiguration</ConfigurationSetType>
<InputEndpoints>
<InputEndpoint>
<LoadBalancedEndpointSetName>name-of-load-balanced-set</LoadBalancedEndpointSetName>
<LocalPort>local-port-number</LocalPort>
<Name>name-of-endpoint</Name>
<Port>external-port-number</Port>
<LoadBalancerProbe>
<Path>path-of-probe</Path>
<Port>port-assigned-to-probe</Port>
<Protocol>probe-protocol</Protocol>
<IntervalInSeconds>interval-of-probe</IntervalInSeconds>
<TimeoutInSeconds>timeout-for-probe</TimeoutInSeconds>
</LoadBalancerProbe>
<Protocol>endpoint-protocol</Protocol>
<EnableDirectServerReturn>enable-direct-server-return</EnableDirectServerReturn>
<EndpointACL>
<Rules>
<Rule>
<Order>priority-of-the-rule</Order>
<Action>permit-rule</Action>
<RemoteSubnet>subnet-of-the-rule</RemoteSubnet>
<Description>description-of-the-rule</Description>
</Rule>
</Rules>
</EndpointACL>
</InputEndpoint>
</InputEndpoints>
<SubnetNames>
<SubnetName>name-of-subnet</SubnetName>
</SubnetNames>
<StaticVirtualNetworkIPAddress>ip-address</StaticVirtualNetworkIPAddress>
</ConfigurationSet>
</ConfigurationSets>
<ResourceExtensionReferences>
<ResourceExtensionReference>
<ReferenceName>name-of-reference</ReferenceName>
<Publisher>name-of-publisher</Publisher>
<Name>name-of-extension</Name>
<Version>version-of-extension</Version>
<ResourceExtensionParameterValues>
<ResourceExtensionParameterValue>
<Key>name-of-parameter-key</Key>
<Value>parameter-value</Value>
<Type>type-of-parameter</Type>
</ResourceExtensionParameterValue>
</ResourceExtensionParameterValues>
<State>state-of-resource</State>
</ResourceExtensionReference>
</ResourceExtensionReferences>
<AvailabilitySetName>name-of-availability-set</AvailabilitySetName>
<DataVirtualHardDisks>
<DataVirtualHardDisk>
<HostCaching>caching-mode</HostCaching>
<DiskLabel>label-of-data-disk</DiskLabel>
<DiskName>name-of-disk</DiskName>
<Lun>logical-unit-number</Lun>
<LogicalDiskSizeInGB>size-in-gb-of-data-disk</LogicalDiskSizeInGB>
<MediaLink>path-to-vhd</MediaLink>
</DataVirtualHardDisk>
</DataVirtualHardDisks>
<OSVirtualHardDisk>
<HostCaching>caching-mode</HostCaching>
<DiskLabel>label-of-operating-system-disk</DiskLabel>
<DiskName>name-of-disk</DiskName>
<MediaLink>path-to-vhd</MediaLink>
<SourceImageName>name-of-source-image</SourceImageName>
</OSVirtualHardDisk>
<RoleSize>size-of-virtual-machine</RoleSize>
<ProvisionGuestAgent>install-an-agent</ProvisionGuestAgent>
</Role>
</RoleList>
<VirtualNetworkName>name-of-virtual-network</VirtualNetworkName>
<Dns>
<DnsServers>
<DnsServer>
<Name>dns-name</Name>
<Address>dns-ip-address</Address>
</DnsServer>
</DnsServers>
</Dns>
</Deployment>
for more details please see
this link.
hope this helps!

I updated to Lion and now the Search function in Apple Mail is not working properly

Even though the "All" option is selected, when I type a string in the Mail spotlight search box, the string is not found. But I know for a fact the string is in an email and I've manually found the email (in a folder) and copied and pasted it into the search box. Mail is still not able to find it.
I have also checked to make sure that "Message contains" is the option in the search box. I've noticed that in some previous searches there has been a little arrow dropdown option next to the magnifying glass icon. But that arrow is not showing up consistently...and is not showing up now.
What am I doing wrong?

Ok...here's the steps to fix this as efficiently as possible. I have a whole bunch of mailboxes under "On My Mac" and they have a bunch of mailboxes nested in them. I get my messages into Apple Mail via IMAP. (I don't know if this matters.) The steps below assume you have a similar setup.
1. Hold the Option key down and click the dropdown arrow next to each mailbox that has one. This will cause all nested mailboxes below it to appear.
2. Go to the top of the list of mailboxes under "On My Mac" and highlight the first mailbox. Then hold the Shift key down and highlight the last mailbox in the list. This will cause all of the mailboxes and nested mailboxes to be highlighted.
3. From the menu, select "Mailbox --> Rebuild" and the rebuild process will start.
4. Watch the top of the mail screen to see the message count change as the mailboxes are being rebuilt. Wait until the activity stops before doing the next step.
5. As the mailboxes were rebuilt, many messages were reset as "Unread" even though every message was previously "Read." Make sure the mailboxes you want to affect are still highlighted. Right-click and select "Mark All Messages Read."
That fixed the problem for me.

HT4910 The copy to information of Mail is not correct!

Similar Messages

Maybe you are looking for