HT4913 one of my two phones accepted imatch and the other says that i meed to subscribe. Why?

one of my two phones accepted imatch and the other says that i meed to subscribe. Why?

Try resetting the one dropping calls more often.  Hold the on/off and home switches together for about 10 seconds till the Apple logo appears.
If that doesn't help, consider restoring it using iTunes.

Similar Messages

  • I have two kinds of songs. one kind is buying from itune store, and the other kind is burning from CD. i got a new 5s, but it only shows the songs that i buy in itune but not the one that from the cds

    i have two kinds of songs. one kind is buying from itune store, and the other kind is burning from CD. i got a new 5s, but it only shows the songs that i buy in itune but not the one that from the cds

    Are the ones from the CD's on iTunes? You may just have to sync them over to the phone.

  • I was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

    i was wondering if you could have one desktop audio playing through your speakers and the other one playing through your apple tv at the same time?

    Problem here is you admit you cannot afford the service.
    And you want to blame Verizon for losing a job because you have no cell phone.
    If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
    No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
    Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
    Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
    Good Luck

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • VMware Tools -So which command do believe? One says version 6 and the other says 3.0.2?

    Hi ,
    Please check the output of the commands 
    [# vmware-config-tools.pl -h
    VMware Tools 3.0.2 build-52542 for Linux configurator
    ..# vmware-checkvm
    VMware software version 6 (good)
    So which command do beleive ? One says ver 6 and the other says 3.0.2 ?
    Thanks,

    Hi ,
    Please check the output of the commands 
    [# vmware-config-tools.pl -h
    VMware Tools 3.0.2 build-52542 for Linux configurator
    ..# vmware-checkvm
    VMware software version 6 (good)
    So which command do beleive ? One says ver 6 and the other says 3.0.2 ?
    Thanks,

  • I tried to down load photos to my computer, but accedently click update setting as well. Now the phone is frosen and the computer shows that I have to restore the phone, in this case I will loss all the photos. right? what should I do?

    I tried to down load photos to my computer, but accedently click update setting as well. Now the phone is frosen and the computer shows that I have to restore the phone, in this case I will loss all the photos. right? what should I do?

    Follow this very helpful user tip by wjosten:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • How do you share one iTunes with two phones but not get each other's apps when you sync?

    My husband doesn't want to have the kid's apps or my apps download on his iphone when he syns to our one iTunes library....suggestions?

    Each device will ONLY sync what you select.
    Just do not select the apps that you do not want.  Only select the apps that you do want.

  • I have 2 iphone 5 and 1 4s and one of the iphone 5 can send to the other two phones i have but the other two can not send to one of the iphone 5 WHY

    what if you cant imessage someone in  your account

    http://support.apple.com/kb/HT3529
    http://support.apple.com/kb/ts2755

  • Subtracting two waveforms, one aquired using DAQ analog voltage input, and the other one being internally generated

    Hello NI Community,
    I am new to LabView and was hoping someone might be able to help with a question I have. Right now, I am using a DAQ unit to sample an externally generated sinusoid and I would like to alter that signal by adding to it another signal that I could control using the front panel. Whenever I try to just connect the input with something like the sine waveform vi and put a subtraction sign between them it doesn't work (I get an empty waveform graph). To get around this, I have resorted to sending out a signal (through an analog output) and then reading the signal on the Daq, and then finally I add the two together. Doing it that way works, but it wastes two channels and I imagine there is a better way. I have attached my VI, and I labelled the location of interest  "Where the Signals Get Subtracted", which is currently shown using the two inputs.
    Thanks,
    Leo

    What a mess.  I have no idea where you are trying to do the subtraction.  Can you make a very small VI (one whose Block Diagram fits on a single screen) that shows what you are trying to do?  Include the Sine Wave Generator, and you can include a "Black Box" that says "From DAQ".  But thank you, at least, for posting code, not a picture.
    Here's a suggestion that may help make things less messy -- do you know about the Diagram Cleanup tool?  See the icons at the top?  The right-most one looks like a broom next to a VI.  Save your VI first (in case you don't like what it does), Select All (Ctrl-A), then click this button -- you may like the result.
    Bob Schor

  • Is it possible to have two hard drives connected to my airport extreme and use one to store my itunes library/iphoto and the other to backup via time machine?  Will the second (larger) drive back-up both my mac HD and my other external airport drive?

    For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine.  This has worked fine without any issues.  What I would like to do now is to move my itunes and iphoto libraries off of my laptop (space constraints) and store them on a second external hard drive (HD2) connected to the airport extreme.  I have successfully connected the second hard drive using a Belkin powered USB hub.  What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?  I apologize if this has already been answered but i've read conflicting responses on various message boards and a number of responses were dated so I wanted to make sure I received the latest information. 
    thank you

    kosty wrote:
    For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine.  This has worked fine without any issues. 
    That may be true, but you need to know that backing-up that way is unreliable and not supported by Apple.   See:  Using Time Machine with an Airport Extreme Air Disk.  Do not be surprised if those backups suddenly turn up corrupted.
    What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?
    No.  Time Machine cannot back up from any network location.  The 3rd-party utilities CarbonCopyCloner and ChronoSync may be workable alternatives.

  • TS1969 What do I do if I am unsure who has iTunes open,. One account on PC is logged off and the other user is logged on, however iTunes will not open

    THere are two users on pc. One is logged off, however when I try to launch iTunes, The message pops up another user logged on, ask user to log off and try again. What do I do?

    Re-start the computer.

  • How to set up iCloud so one user on my computer has it and the other doesn't.

    I have two users on my laptop. How do I keep iCloud for User #1 but disable it (so it STOPS asking me to set it up) for User #2?

    Hi,
    Try doing a FULL restore of your device and then put everything back on it. Tell me if this works.
    xxmitchxx90

  • I have an iMac, iPad 2 and one child has an iTouch and the other an iPhone 4S.  How do we get separate facetimes?

    Hello, I have an iMac and an iPad 2.  one of my kids have an iTouch and the other an iPhone 4S. 
    When their friends call, it shows up on my iPad 2 and the list of friends is the list of friends for my child
    who has the iPhone 4S.    To my knowledge, we all have to share an APPLE ID to share music and apps?...
    So is that the problem....what happens if we have separate APPLE ID's....?
    Even though we are an APple fam, I am still not sure how the whole thing works....
    How do we get separate facetimes?  Thank you so much in advance.  

    Actually you can have separate apple ID's for icloud and facetime but use the family one for purchases so you can share your apps, music..
    Each owner opens up a Apple ID for only their device(s).. Log into icloud using new apple ID on each device for each person. Hit facetime in settings, and input your new apple id as facetime ID.. Done..
    Now go to settings > store and make sure your family account is inputed there on all the devices so you can share your purcahsed music, apps, videos, etc....
    I am sharing purcahses with my entire family but we all have separate icloud, facetime, apple ID etc.. Its imperative you have split Apple ID's for icloud otherwise all your phonebooks will mix and match.....
    Also as far as iphone goes.. Iphone can be set up to use apple ID to call or phonenumber (by default) So if you facetime a number it will ring only on that phone, if you facetime an apple ID that is on the iphone it will ring on all devices associated with that apple ID

  • Why is one slot saying 2.5gt/s and the other 5.0gt/s?

    Hello,
    I have a 2008 mac pro with 3.0 Ghz Harpertown processors. I thought these 2008 mac pros had two PCIe 2.0 slots, but yet according to my system profiler.. one slot is reporting at 5.0 and the other is 2.5 - what gives?
    ATI Radeon HD 4870:
    Name: ATY,MotmotParent
    Type: ATY,MotmotParent
    Driver Installed: No
    Bus: PCI
    Slot: Slot-1
    Vendor ID: 0x1002
    Device ID: 0xaa30
    Subsystem Vendor ID: 0x1682
    Subsystem ID: 0xaa30
    Revision ID: 0x0000
    Link Width: x16
    Link Speed: 2.5 GT/s
    ATI Radeon HD 2600:
    Name: ATY,Lamna
    Type: display
    Driver Installed: Yes
    Bus: PCI
    Slot: Slot-2
    Vendor ID: 0x1002
    Device ID: 0x9588
    Subsystem Vendor ID: 0x106b
    Subsystem ID: 0x00a6
    Revision ID: 0x0000
    Link Width: x16
    Link Speed: 5.0 GT/s
    Shouldn't both slot 1 and 2 be PCIe 2.0?? Why is one being reported as 1.1 and the other is being reported as 2.0? Is there something wrong with my PCIe slot?? I am saddened to hear this as I traded up my 2006 mac pro and now I see that i am not getting 2 x PCIe 2.0 slots as reported.

    DpArt,
    Are you sure that is what the problem is? When I get home from work tonite, I will try to swap the cards and see. Originally, my harpertown mac shipped with the ATI Radeon 2600 XT, a very mediocre card and its in slot 2 reporting 5.0, while the ATI Radeon 4870 is a 1GB slightly overclocked(applemacanix) flashed card and its in slot 1 reported as 2.5 which I am hoping that this is an oversight and not a mechanical failure or problem with my pcie slot.

  • I am having problems because two phone numbers are on the Apple ID, how do I choose one for imessage?

    I am having problems because two phone numbers are on the Apple ID, how do I choose one for imessage?

    Hello,
    In my opinion, this is the best procedure to use to update your BB OS:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    However, the official download site:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    shows your installed OS to be the current version from your carrier. Therefore, how your friends got a newer OS is a question to ask them and/or your carrier.
    You are, of course, free to use (via the above procedure) any carriers OS package...if another has the newer OS you want, you can use it. If you choose to do so, then simply insert, between steps 1 and 2 in the above procedure, the deletion, on your PC, of a file named VENDOR.XML
    Good luck.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • External hard drive not working in USB multi-port adapter

    Hi, I was wondering if anyone had a suggestion...I got a new My Passport Essential portable external hard-drive. I have a Belkin multi (4) USB adapter and when I plug the hard-drive in, it won't recognize it. It only works if I directly plug it into

  • I'm creating a layered pdf from CS3 v5.0.3 and my layered PDF always has

    a layer called "Guides and Grids". This is not a layer in my InDesign file and doesn't contain any information in the PDF. I've done a few tests thinking that maybe my actual guides were somehow coming over on a new layer from my master page, but thi

  • How to pass an array to a function from a SELECT statement

    Hi all. I have a problem with passing an array to a function directly from a SELECT statement. Here is what I want. If I have a function function AAA(arrayVar <ArrayType>) return number; I want to be able to call this function this way select AAA((2,

  • Create Gradient From Color Group

    I think it would be good to add a feature that allows you to drag a 'Color Group' to the Fill box or to the gradient window which then creates a gradient, evenly spacing each color in the group. This features is mainly for convenience and time-saving

  • Windows 8.1 & Iphone 5s Via Organizer

    Ok Very new to the community and adobe software. Moving from IPhoto and mac based CPU's but keep apple for my personal devices. When I downloaded my pic and vid to the organizer I ran into an issue. I couldn't automatically delete the originals. Ever