HT4914 Can you use I tunes match for movies saved within iTunes?

Thinking about joining iTunes Match but does it Orkney for movies as well as songs?

When importing songs into imovie, iTunes Match songs may appear to be unavailable. This is because you cannot import songs that are not stored locally on your device.
To import an iTunes Match song you must download it first. To download a song:
Open the Itunes
Go to the Albums view.
Click the Download from iCloud button on the top right of each album cover
4. Once the song is downloaded you can import it into imovie.
Hope this helps

Similar Messages

Can i use I tunes Match with an iPod?

Can i use i tunes match with an ipod classic?

Yes you can, although I have never used it.

Can you use the Vocal Transformer for Live Show?

Can you use the Vocal Transformer for Live Show? I have automations set up in my vocal track using the vocal transformer and would like my vocals to adjust accordingly while performing live. Is this possible to configure and if so, how do I set it up at the venue?

Vocal Transformer opens in MainStage. All controls in VT are visible & editable in MS. Don't set it up at the venue. Set it up in one or more patches before you leave your house. You will need up to twelve sliders or knobs plus one or two buttons on your controller to get the most out of it.

HT5085 Can I use I tune match to get my music off iPod classic?

Can I use I tune match to get my music off iPod classic?

The iPod classic shouldn't be used to store the only copy of music or be considered a backup device. Put the music on a regular external drive or DVDs.
(81321)

HT4914 If I use I tunes match and have all my music on the cloud, will I be able to listen to it, meaning will it be on my device when I am without a cell or wifi signal....like on a plane or in an area without service?

If I choose to use I tunes match, and store my music on the cloud, will I be able to access it when I don't have a cell signal or wifi? For example, when I'm on a plane or in an area without a cell signal or wifi. And, if its just cellular coverage, will it count as "data" against my limit?

Yes, it would count against your data. The transfer part is part of your cellular coverage, whether it be from Apple's iCloud or a totally unrelated feed.
iTunes match - http://www.apple.com/itunes/itunes-match/ - see FAQ at end too
"Does iTunes Match stream or download songs?
On a computer, any songs stored in iCloud will stream over the air when played, though you can download them at any time by clicking the iCloud download button. iOS devices will start playing tracks from iCloud as they download and will store them so that you can listen to them later even if you don’t have a network connection. Apple TV only streams songs."
So, from the above, if you are sitting in an airplane and suddenly decide you want to listen to a song that has not downloaded to your device then you will have to wait until you can use your service again (or pay the airline to use their wireless).

HT1947 Can you use your iPad alone for sharing iTunes music to apple tv without having your pc on?

Can you use your iPad alone to share iTunes music to apple tv without having to use your pc?

Do you have any music stored on your iPad or is it all on your PC?
If the music is stored on your iPad, then double tap the home button, swipe (left to right motion) and you will see the volume/brightness controls/AirPlay. Tap on AirPlay and select ATV. Then go into the music app

Migrating to Sharepoint 2013 from 2010 - Can you use the same URL for the Web Application without affecting the 2010 environment?

Hi,
I am currently trying to migrate our SharePoint 2010 environment to SharePoint 2013. The first thing I'm doing is creating a 2013 development environment to verify that this migration goes smoothly. I'm also doing this so that we will have a testing environment
after the upgrade to 2013 is complete.
So here is my question: I have a 3 tier farm including; 1 app server, 1 wfe, and 1 sql server. I have made a copy of our SharePoint 2010 database and installed that on our sql server 2012 sever (This new environment is on 3 completely separate servers from
our 2010 environment). I have also installed the prereqs and configured SharePoint 2013 on the App server and wfe servers, as well as configuring the necessary service applications (I have created a completely new 2013 database where I will migrate my 2010
database content when I'm ready).
I am now at the point where I need to create a new web application on the 2013 app server, where I will be migrating the copied 2010 database. (Also note that we have a 2010 development site called https://[email protected])
When I go to create a new web application in our 2013 dev environment, can I use the same url (https://[email protected]) to create this web app, or will this screw up our current 2010 dev environment?
I'm new to SharePoint migrations, so I apologize if this is a stupid question.
Thanks in advance for any insight you can share on this!
Boe Barlage

So, what you are recommending is that before I create a web application in my new 2013 environment, I need go into my hosts file on my 2013 app server and alter it to point to my 2013 wfe.
Then after I do that, then I can create my new web application on my 2013 app server with the same url as my 2010 testing environment
(https://[email protected]).
Then after that I should be able to access my new sharepoint 2013 environment at the same URL (https://[email protected])?
I must be missing something.
In your first reply, you told me to alter the host file on my 2010 app server and point it to my 2010
wfe (I guess I thought it probably already is). You also told me to alter the host file on my 2013 app server and point it to my 2013 wfe.
so I am confused on after I do this, what url would I access my 2010 test environment, and what url would
I access my 2013 test environment?
I am fine with having my test environment as a different URL until I am totally ready to roll everything over and kill the 2010 site. But I want to make sure that when I migrate my database, none of the site links are broken.
I also want to make sure that if I proceed this way, I want to be sure that I will be able to modify the URL to what my 2010 environment is (without a lot of headaches) when I am ready to kill the 2010 site.
Thanks again for your help, it's much appreciated!
Boe Barlage

Can you use CS6 serial number for Lightroom 4?

Hi everyone,
I used to have CS6 and Lightroom downloaded on my computer but it fried and I had to replace it. On my new laptop, I tried downloading Lightroom and using my old serial number, but it didn't work. I was wondering if maybe it was Lightroom 4, and Adobe had released Lightroom 5 during the time when I didnt' have a computer. Can I use my CS6 serial if I download Lightroom 4?
Thank you!

Can I use my CS6 serial if I download Lightroom 4?
No. The CS6 serial number is very specific: it only works for the product and operating system that it was purchased it for.
If you had, for example, Photoshop CS6 for Windows, that CS6 serial number would not even work on a Mac.
You'll need to locate your Lightroom 4 serial number.

Can you use a text field for email sender with E-mail button

basically i would like to use input information from the user when someone sends an email instead of the default which is to look for a third party e-mail program like outlook. I want to bypass that and possibly use a text field that has the user input their email. some people don't use outlook so it would be nice to bypass that somehow. Is there a way to send email without the whole outlook thing, like not needing a "sender" and instead require them to input email address. I just want to receive the pdf. I am using LIVECYCLE by the way.

You must enable POP forwarding for the account preferences via webmail access for the account.
http://mail.google.com/support/bin/answer.py?answer=13273
http://www.macosxhints.com/article.php?story=20041110192454841
The instructions for enabling POP forwarding and creating the account as a POP account with an email client such as the Mail.app are available at Gmail's website.

Can you use different audio devices for different apps?

I've paired my iMac with a set of Bose Companion 20's - they connect via the headphone socket. I regard these as my default audio device. However, when I work from home I need to use Lync 2011 for Mac and want to be able to use a bluetooth headset for lync enterprise voice calls (my employers chosen platform). Is it possible to use my bluetooth headset for incoming / outgoing calls when using Lync but the Bose speakers for say internet radio? If this is possible, any guidance as how to configure would be much appreciated. Thanks in advance....

After going to a particular folder and selecting a view, click the little Action Gear and select "Show View Options" and at the top check the box "Always open in xxx view" where xxx will be the view you presently have selected.
Do not check the bottom box to use this as a default or else all folders will then open this way.
Message was edited by: nerowolfe

Can you use the 30inch screen for windows

If any one knows can you post it on the display forums?

NVidia has released a monster of a new workstation card...
http://www.nvidia.com/page/qfx_uhe.html
a dual GPU unit that can support up to 4 30" displays in dual link mode.

How can I use SQL to search for a pattern within a field?

Hello, Frank, Solomon, ect
I am now faced with this particular scenario, I've got the SQL to search through a field to find text within the field, but I have to know what it is before it can look for it.
What I have to do is this:
Search through a field, for a pattern, and I won't know what the data is I am looking for. Can this be done in SQL?
For instance, Here is my SQL this far, I was helped allot in order to get to this point.
select table_name,
       column_name,
       :search_string search_string,
       result
from (select column_name,
               table_name,
               'ora:view("' || table_name || '")/ROW/' || column_name || '[ora:contains(text(),"%' || :search_string || '%") > 0]' str
          from cols
         where table_name in ('TABLE1', 'TABLE2')),
       xmltable (str columns result varchar2(10) path '.')
When you execute the above SQL, you have to pass in a value. What I really need is to alter the above SQL, to make it search for a pattern that exist's within the text of the field itself.
Like for instance, lets say the pattern I am looking for is this" xx-xxxxx-xxxx" and it's somewhere in a field.
I need to alter this SQL to take this pattern and search through all the schemas and tables to look for this pattern match.
Can be done?

When you use something dynamically within a function or procedure, roles do not apply and privileges must be granted directly. So, you need to grant select on dba_tab_cols directly. If you want to do pattern matching then you should use regular expressions. The following example grants the proper privileges and uses regexp_instr to find all values containing the pattern xxx-xxxx-xxxx, where /S is used for any non-space character. I limited the tables in order to save time and output for the test, but you can eliminate that where clause.
SYS@orcl> CREATE USER test IDENTIFIED BY test
2 /
User created.
SYS@orcl> ALTER USER test QUOTA UNLIMITED ON USERS
2 /
User altered.
SYS@orcl> GRANT CREATE SESSION, CREATE TABLE TO test
2 /
Grant succeeded.
SYS@orcl> GRANT SELECT ON dba_tab_cols TO test
2 /
Grant succeeded.
SYS@orcl> CONNECT test/test
Connected.
TEST@orcl> SET LINESIZE 90
TEST@orcl> CREATE TABLE table1
2    (tab1_col1 VARCHAR2(60))
3 /
Table created.
TEST@orcl> INSERT ALL
2 INTO table1 (tab1_col1) VALUES ('xxx-xxxx-xxxx')
3 INTO table1 (tab1_col1) VALUES ('matching abc-defg-hijk data')
4 INTO table1 (tab1_col1) VALUES ('other data')
5 SELECT * FROM DUAL
6 /
3 rows created.
TEST@orcl> CREATE TABLE table2
2    (tab2_col2 VARCHAR2(30))
3 /
Table created.
TEST@orcl> INSERT ALL
2 INTO table2 (tab2_col2) VALUES ('this BCD-EFGH-IJKL too')
3 INTO table2 (tab2_col2) VALUES ('something else')
4 SELECT * FROM DUAL
5 /
2 rows created.
TEST@orcl> VAR search_string VARCHAR2(24)
TEST@orcl> EXEC :search_string := '\S\S\S-\S\S\S\S-\S\S\S\S'
PL/SQL procedure successfully completed.
TEST@orcl> COLUMN "Searchword"     FORMAT A24
TEST@orcl> COLUMN "Table"     FORMAT A6
TEST@orcl> COLUMN "Column/Value" FORMAT A50
TEST@orcl> SELECT DISTINCT SUBSTR (:search_string, 1, 24) "Searchword",
2               SUBSTR (table_name, 1, 14) "Table",
3               SUBSTR (t.column_value.getstringval (), 1, 50) "Column/Value"
4 FROM   dba_tab_cols,
5          TABLE
6            (XMLSEQUENCE
7           (DBMS_XMLGEN.GETXMLTYPE
8              ( 'SELECT ' || column_name ||
9               ' FROM ' || table_name ||
10               ' WHERE REGEXP_INSTR
11                     (UPPER (' || column_name || '),''' ||
12                  UPPER (:search_string) || ''') > 0'
13              ).extract ('ROWSET/ROW/*'))) t
14 WHERE table_name IN ('TABLE1', 'TABLE2')
15 ORDER BY "Table"
16 /
Searchword               Table Column/Value
\S\S\S-\S\S\S\S-\S\S\S\S TABLE1 <TAB1_COL1>matching abc-defg-hijk data</TAB1_COL1>
\S\S\S-\S\S\S\S-\S\S\S\S TABLE1 <TAB1_COL1>xxx-xxxx-xxxx</TAB1_COL1>
\S\S\S-\S\S\S\S-\S\S\S\S TABLE2 <TAB2_COL2>this BCD-EFGH-IJKL too</TAB2_COL2>
3 rows selected.

Can you use a visa gift card to buy an itunes gift card online?

Ive read many discussions but non were clear.....
Can i get a visa gift card and buy an itunes gift card online??
If so how?

Not that I am aware of...
Credit Card in your name or iTune Gift Cards.

HT4914 Can you use iTunes Match on multiple devices with different apple id's ?

I have multiple phones with the same iTunes ID but they have different apple ID , will the iTunes Match work with all my devices ?

I've got the latest version of iTunes & it's supposed to be able to be enabled under top panel "store" then appear down left side panel to subscribe. Which makes me think that it musn't be able to be used if you're running XP as it's not there....

Can you use the same form for different datasheets?

Hello! Thanks in advance for your time.
To keep this short, I have created a form at my place of work to do a type of process audit. The form has worked extremely well and now other areas of the business would like to use it. For example, let's say I wanted to perform the exact same process audit
at a supplier, but I want a separate datasheet on my SharePoint page to separate in house audits from supplier audits. The form I created for in house audits took an extremely long time and has tons and tons of fields and tons and tons of rules.
Can I simply save the form to a new location, and somehow publish the form to a datasheet view so all fields from the form appear as columns and the form submits data to the new datasheet? If so, can somebody explain how? I would be eternally greatful!
Mitch

Would this be an InfoPath form?
One option would be to extend your current form to have a 'Type' field that has 'Internal' and 'Supplier' as choices. You could then create views to show 'All', 'Supplier only' and 'Internal only' subsets of the data.
Alternatively you may be able to save the list as a template and then re-use it but I can't remember how well if at all that works.

HT4914 Can you use I tunes match for movies saved within iTunes?

Similar Messages

Maybe you are looking for