HT4914 drag and drop file into itunes library

I am no longer able to drag and drop a song file on my Mac desktop into iTunes library..anyone know why?

JollyGeri, after I installed the 10.5.3 version a few days ago I began to have the same problem.  The first time i used iTunes after the new install is when the problem of not being able toI manipulate my music by dragging and dropping began.  My computer is a Mac and it appears you are using Windows Vista so the solution to my problem will likely be different than yours.   I'll just mention that on a mac there is a program called disk utility and with that we mac users can have it repair permissions.  After a second attempt yesterday to repair permissions I was able to move music by dragging and dropping as I previously could.  However, when I opened itunes today and tried, the same problem was back.  I've used the disk utility program to repair permissions again but so far the problem persists.   I hope someone is able to help you with your situation.   If there is a similar type of program on your windows pc, perhaps by repairing the disk permissions you may be able to get your problem solved.  This is very frustrating and I believe there is something in the new version of iTunes that has caused this because I have not installed any other upgreades, etc. since downloading and installing the itunes upgrade.    Good luck!

Similar Messages

  • After installing iTunes 10.5.1, I can no longer drag and drop files into iTunes. Any suggestions?

    Basically when I try to drag files from a folder into iTunes, (drag and drop within iTunes is fine) the little picture of the circle with a slash through it shows up and wont allow me to drop it into iTunes. Does anyone know why this is happening and what I can do to fix it? Thanks. I'm so frustrated I'm about to smash my computer. I've tried uninstalling and reinstalling, restarting my computer, everything I can think of.

    just want to add my annoyance to the pile here. I can't see any logic behind removing the drag and drop function, especially when adding a new folder is now a multi-step process that is far from obvious. to start a new playlist with local folder content you now need to:enter settingsclick into advanced settings (basically all settings now seem to be "advanced"?)manually find and add the foldergo through the adventure of finding the files in your library.
    -- because they may or may not be listed under "local files" - you won't know because Ctrl+F is also removed. so you have to remember/know what the album you added is called and search for that. if you have a mixed bag of file names from various albums, you're basically shafted; there's no way to find them all with a single search.then you can add them to playlisteta: but wait! there's more! if you have more than 15 files? you're **bleep** out of luck, because the search will only display the first 15 hits among your local files, and then show you spotify library tracks.I can't help but feel as though spotify is doing everything they can to stop us using spotify to listen to local files, as bugs that make it more or less impossible persist through multiple versions - and now features that seem to me to be basic functionality are being removed?mega minus points from someone who's been using spotify since 2008.

  • I can't drag and drop files into iTunes - any ideas?

    As I often do, I went to drag four new files into a playlist in iTunes and suddenly they will not go in.  I just get that circle with a diagonal line across indicating that this is not possible. 
    Lately iTunes has been giving me all sorts of problems such as not recognizing my iPhone or iTouch. 
    Has anyone else been having these sorts of problems??

    JollyGeri, after I installed the 10.5.3 version a few days ago I began to have the same problem.  The first time i used iTunes after the new install is when the problem of not being able toI manipulate my music by dragging and dropping began.  My computer is a Mac and it appears you are using Windows Vista so the solution to my problem will likely be different than yours.   I'll just mention that on a mac there is a program called disk utility and with that we mac users can have it repair permissions.  After a second attempt yesterday to repair permissions I was able to move music by dragging and dropping as I previously could.  However, when I opened itunes today and tried, the same problem was back.  I've used the disk utility program to repair permissions again but so far the problem persists.   I hope someone is able to help you with your situation.   If there is a similar type of program on your windows pc, perhaps by repairing the disk permissions you may be able to get your problem solved.  This is very frustrating and I believe there is something in the new version of iTunes that has caused this because I have not installed any other upgreades, etc. since downloading and installing the itunes upgrade.    Good luck!

  • Drag and drop files into folders in iPad reader? or iTunes?

    is it possible to drag and drop files into folders in iPad reader? or iTunes?  It is very clunkey to have to click each separate file to instruct it to move to the folder.  Better still, can I just sync an existing folder on my hard drive so the pdf's inside always remain up to date on my iPad?

    There is no way to drag and drop in Reader on an iPad.
    There is no way to sync PDFs in a folder on your hard drive to those inside of Reader.
    There are readers (which are NOT free) which let you do some of these things and have more capabilities. You might check out PDF Expert from Readdle which costs $9.99 US.

  • Can't drag and drop files in iTunes 7.6

    I've suddenly lost the ability to drag and drop files in iTunes, so I can't change the order of items within a playlist, move tracks from one playlist to another, or move a selection of tracks to an external drive. When I click & hold on a track, nothing happens at all; if you try to drag the file it doesn't move then bounce back - just no reaction at all. One day it worked fine, next time I launched iTunes the problem appeared. I'd had 7.6 up and running for about a month without this problem, and had no other software downloads or updates immediately before the problem appeared. I'd not changed any iTunes preferences either.
    I've checked that lefthand column in the playlist is selected, & that shuffle is turned off, & I'm not trying to move things into a smart list. I've tried trashing the com.apple plist, and repairing disk permissions. My iTunes library lives on an external hard drive, but this hasn't been an issue before. Drag and drop still works fine in other apps, so I don't suppose it's a mouse or Finder issue.
    I see a few other people have posted about this, but I haven't seen any solutions yet that worked for me. Am I missing something blindingly obvious? If anyone's got any ideas on this one I'd be eternally grateful - the ability to move things around easily was one of the main attractions of iTunes for me.

    Thanks David - that wasn't it, but I have managed to find a fix after trawling through various forums - I logged out then logged back in. Simple as that! Sadly I'm still none the wiser as to what caused the problem in the first place, so don't know if or when it'll reoccur. I also found it was affecting iPhoto after I first posted, so not an iTunes specific problem obviously. Thanks to all those who posted fixes in various forums, though some looked a little too scary for me to try out...

  • Why Can I no longer drag and drop songs into Itunes playlists?

    Why can I no longer drag and drop songs into itunes playlists.  Was working fine then just stopped???

    found solution, thanx everyone

  • Why cant i drag and drop movies into itunes?

    why cant i drag and drop movies into itunes?

    To make it display on the desktop, Finder > Preferences > General tab > check external disks.
    The drive might be formatted NTFS for Windows which is treated as read-only on the Mac.  Need to reformat it using disk utility.

  • Drag and dropping files into widgets

    I just installed two widgets that are supposed to function by dragging and dropping files into them. How do I get access to files? How do you get files from the Finder into the dashboard?

    EMichaelM wrote:
    I just installed two widgets that are supposed to function by dragging and dropping files into them. How do I get access to files? How do you get files from the Finder into the dashboard?
    You need to activate Dashboard's "Developer Mode" in order to keep widgets active on the desktop.
    Open Terminal and enter the following command:
    <PRE>
    defaults write com.apple.dashboard devmode YES
    </PRE>
    Close Terminal, log out of your user account, and log back in again. To move a widget onto your desktop, activate Dashboard and start dragging the widget to the desktop. Press F12 before letting up on the mouse button to close Dashboard, and the widget should now be permanently affixed to the desktop. Drag to your desired location.
    Steve

  • Can't drag and drop files into Attachments while in Administrator mode

    I can drag and drop files into attachment easily when I'm not in Administrator mode. But I need to be in Administrator mode at work and therefore for some reason I cannot drag and drop files into attachments; I'm forced to manually search and select particular files for attaching, which significantly slows my day-to-day work.
    Is it a bug?
    I have the up-to-date version of Thunderbird and I use MS Windows 7 Ultimate.
    Any help would be highly appreciated.
    Thx

    To diagnose problems with Thunderbird, try one of the following:
    *Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • After Effects 12.0 cannot drag and drop files into it?

    I'm simply trying to drag and drop files into the programs project files. Has worked in other ae versions, help?

    Install the updates:
    After Effects CC (12.2.1) bug-fix update

  • Can't drag and drop apps in iTunes library after a restore

    Came back from an update (having transferred all new purchases off my ipod before updating) to find ipod completely empty, and needed to restore! (ipod only 2 months old) Initially couldn't drag and drop any of the library back into restored ipod, but after a computer restart, books and music transferred fine. But no apps (including the ibooks app) will drag across to the ipod: they just become a circle with a slash through.... what am I missing here?

    Thanks David - that wasn't it, but I have managed to find a fix after trawling through various forums - I logged out then logged back in. Simple as that! Sadly I'm still none the wiser as to what caused the problem in the first place, so don't know if or when it'll reoccur. I also found it was affecting iPhoto after I first posted, so not an iTunes specific problem obviously. Thanks to all those who posted fixes in various forums, though some looked a little too scary for me to try out...

  • Can't drag and drop files into Indesign.

    My ability to dragon and drop files into InDesign has stopped. I also cannot copy and paste. I have tried dropping previously used jpg's and PDFs as well as copying text from Acrobat, Chrome and Word. I reset the prefrences with control option command shift, but still no luck - I can't drag and drop files. Also, I cannot move files with my mouse in the program.

    Nobody can help you without system information. Could be anything from graphics driver issues to a defective mouse to a busted operating system...
    Mylenium

  • Drag and drop file into Outlook from AIR application

    I am hoping to see if this would be possible with the Adobe AIR API. We currently have a desktop AIR application that clients install in order to facilitate certain operations triggered via a web application (such as opening files directly from the web).
    One of the actions we are requested to support is the ability to drag and drop files from our web application directly into Outlook and have the file added as an attachment. I saw the documentation at Adobe Flash Platform * Dropping file promises and was wondering if this might be a possibility, or if there was some other method of performing this.
    We are trying to get around the fact that users now have to download a document to their desktop before being able to attach in Outlook.
    Thanks for any assistance.

    You just aren't calling the right NativeDragManager functions. See http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7d83.html

  • Is it possible to drag and drop files into flash?

    Hi,
    Im making an upload control that
    will upload files from the user computer to the server
    Right now the user choose the files with the 'Browse for
    files dialog'. I
    want that the user will be able to drag and drop files to the
    control
    instead.
    Is it possible?
    Thanks,
    Ehud

    Ehud Banai wrote:
    > Hi,
    >
    > Im making an upload control that
    > will upload files from the user computer to the server
    > Right now the user choose the files with the 'Browse for
    files dialog'. I
    > want that the user will be able to drag and drop files
    to the control
    > instead.
    Not possible.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • I can't drag and drop files into a playlist.  Any ideas?

    As I often do, I went to drag four new files into a playlist in iTunes and suddenly they will not go in.  I just get that circle with a diagonal line across indicating that this is not possible. 
    Lately iTunes has been giving me all sorts of problems such as not recognizing my iPhone or iTouch. 
    Has anyone else been having these sorts of problems??

    Try to drag them directly to "Music" or "Movies" or whatever, rather than a specific playlist. THEN drag them to the playlist --
    Given your other issues, sounds like you iTunes library might be corrupt...

Maybe you are looking for

  • 'You have used a feature that requires the Flex SDK'

    I've tried this code from a tutorial: // ActionScript 3.0 *  Note: This example assumes the bullet_star.png file *  is in the same directory as your .FLA file. [Embed("bullet_star.png")] const BulletStar:Class; var starIcon:DisplayObject = new Bullet

  • Deploying Forms 6i with Forms Server 6i

    Hi there. I am trying to deploy a application with Forms 6i using Forms Server 6i, with 8.1.7 DB. The forms are linked to a library, and when i try to run them over the browser, i get error messages saying that the pl/sql procedures in the library ar

  • Anyconnect VPN not prompting to accept Certificate (Windows 7)

    Hello, I have an issue with windows 7 and anyconnect.  When trying to connect to the VPN server the anyconnect client pops up a window saying that the server certificate cannot be verified. Doing the same in a windows XP machine just pops a window an

  • Problem with renameTo function

    Hello ! I hava got a problem on renameTo function. I can rename the short file name (for example: REPORT.TXT to REPORT.ERR), but I can't rename the long file name (for example: XXX_REPORT_20040125.TXT to XXX_REPORT_20040125.ERR). The following codes

  • ORACLE Crystal Report Error

    Hi All i am using Weakly Bound REF CURSOR to load data to crystal report (getting data from SP) when i am adding SP to the report it will prompt a massage as follows ORA-00000: normal, successful completion Help me to over come this