HT4926 I started editing my project in Final Cut Pro trial, then purchased the full app. Now I can't find my project. What gives?

I started editing my project in Final Cut Pro trial, then purchased the full app. Now I can't find my project. What gives?

Did you by any chance move the Events and/or Projects folders? Are they on an exteranl hard drive and it is now not plugged in?

Similar Messages

  • I have been working on a project on final cut pro trial, just purchased the real deal, but cannot find a way of importing the project

    I have been working on a project on final cut pro trial, just purchased the real deal, but cannot find a way of importing the project

    You don't import the project.
    I'm going to assume that both the trial version and purchased version were 10.1.
    Open FCPX and then Open Library>Other, Navigate to wherever you stored the library (ies) you worked on when you used the trial. Choose that library and your work should be in one or more events in it.
    Russ

  • In Final Cut Pro x, Somehow my video got muted and I can't find a way to UNMUTE it! (it won't let me manually lift up or down the waveform - nor go in and raise the level of loudness) Any suggestions? (How to unmute)

    In Final Cut Pro x, Somehow my video got muted and I can't find a way to UNMUTE it!
    (it won't let me manually lift up or down the waveform - nor go in and raise the level of loudness)
    Any suggestions? (How to unmute)

    Do you know how to use the volume adjustment line?
    If so, is it not working?
    Can you post a screenshot of your audio?

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • Editing .AVI files in Final Cut Pro 5

    I am trying to edit .AVI files on Final Cut Pro 5 on a volunteer basis.
    I have converted the files to .MOV files with Quicktime Player.
    I am able to import one of these files into Final Cut Pro 5, and can even watch it in the viewer.
    But when I place it in the Sequence tab to edit it, I get a screen that says "UNRENDERED" for the whole clip.
    Based on past experience, the video would be harder to edit in a rendered state.
    Any advice on how to edit .AVI files would be much appreciated.

    AVI files are quite similar to some .mov files, but the devil is in the details (so to speak.)
    You don't give any particulars, so I'm going to assume you're working with standard definition NTSC video. Additionally, I'll assume that your system is PowerPC Mac since only FCP 5.1 and higher supports Intel processors.
    FCP uses sequence presets that spell out the parameters for the timeline. If a clip is dissimilar or acquires enough filters to be functionally dissimilar,the timeline will become red for that portion of the timeline. The same is true for the audio portion of the clip.
    The terms "QuickTime" and ".mov" (and probably ".AVI" for that matter) are kicked around as if they are specific but in fact they are quite vague. It's like saying you have a Ford; without any additional info like model and year,  it's hard to get down to cases.
    Use Compressor or QuickTime Pro to convert your footage to DV/DVCPRO-NTSC (if it's SD and you're in North America) and make sure the audio is converted to 48KHz/16-bit. This should match the NTSC presets and your timeline should a "cool" color (dark blue to light green) and playback nicely.
    Depending on the amount of processor power your system has, you may be able to play back clips with filters or even two or more layers of video without rendering. To be frank, don't count on it because someone has had well over 5 years to upgrade the system and hasn't so it may be "peaked out" already. You can usually step through the timeline using the arrow keys or by rendering short segments if you practice good "timeline hygiene" i.e., keep the timeline as clean as possible, don't strew clips over many video layers and let them stack up.
    That should get you going, I strongly recommend you take a little time to read the help docs/// they actually can help.
    Good luck!

  • I just did edited a feature using Final Cut Pro Version 7 i want to upgrade to X will the clips i saved on version 7 still be compatibly and usable on X

    I just did edited a feature using Final Cut Pro Version 7 i want to upgrade to X will the clips i saved on version 7 still be compatibly and usable on X

    thanks I was afraid of upgrading to Pro X and having to redigitise all that footage again thx Tom

  • When will the multicam editing be released in Final Cut Pro X ?

    When will the multicam editing be released in Final Cut Pro X ?

    It says "Coming in early 2012."
    http://www.apple.com/finalcutpro/software-update.html

  • Why can I not export my project to disc on this final cut pro trial?

    Why can I not export my project to disc on this final cut pro trial?

    Make shure that Share option in in the menu..
    Customize the Share menu in Preferences: Destinations!

  • Final Cut pro doesn't play the frames

    My final cut pro doesn't play the frames in the application.
    The whole time it works great but at ones this happend.

    Couple of things to check and try.
    1) In Viewer Display options check to see whether Better Performance is checked in the Quality section. If not, check it and that should help you set real time playback with a slight reduction in quality in the Viewer. However, it will not have any affect on your project.
    2) If that doesn't work, consider generating Proxy files by eight clicking clips >Transcode Media. There is also a setting in Viewer Display Options to use Proxy in editing your project. Before you export the finished project, remember to change that setting  back to Original/Optimized.
    3) If that doesn't work, download a speed test and check the throughput of your media drive. It should be a separate drive from your start up disk and should be connected by Thunderbolt (fastest) USN3 (next fastest) or Firewire 800.
    Russ

  • My files from final cut pro trial aren't transferring to final cut pro x - how do I fix this?

    I had been making a video in the final cut pro trial and didn't realize my trial was going to run out as soon as it did that day. I downloaded final cut pro x and was planning on finishing up editing tonight, but none of my files from final cut pro trial transferred over to final cut pro x. Everywhere I have read online said they should transfer automatically, but that's not happening. Is there a fix?

    you're tried using the 'Open Library' command?
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver217d6e77d
    Where are your Projects & Events located?

  • Using the final cut pro trial, i can't export?

    i downloaded the final cut pro trial a while ago, not activating until recently. i guess before i activated it, after downloading, i had to get switch my glitchy macbook for a new identical one. i don't know if this is the problem, but it could be. i am making a movie in the trial version, and under commands, export is not clickable. so, i used the share option, and tried to share it as a master file... then to an apple product... then tried to share to youtube. all result with the same thing. it'll act as if it's working, but after maybe 30 seconds a little message saying "Share Failed." when i click on details, all it says is "The operation could not be completed because an error occurred when creating frame 1543 (error -1)." I don't know what that means. Does it mean one of my clips is the glitch? I have no idea what the problem is here. Are you even allowed to export using the trial version anyway? I haven't been able to get a straight answer there either. Thanks!

    As Bobbyyco said, you should definitely be able to share from the trial version.
    In Preferences>General>Time Display, you can change the to Frames, which makes it easier to locte the slip that includes the frame in the error message.
    You could then use a replace edit to substitute something ales in its place. Then use the range tool to select a short section that includes the replaced clip and export as a master file.
    If it works, your project should export. (Transcode a new version of the clip by right clicking and use that as the permanent substitute clip.
    If it doesn't work, turn off background rendering in Preferences. Select your project and from the File menu, choose Delete Project Render FIles. When prompted choose All Files. Do another test export as a master file without rendering.
    Russ

  • I can't export video from final cut pro trial

    I'm currently using final cut pro trial.
    i have finished a project, and tried to export the video.
    There's not "share" on tool bar, but there' one under "file" toolbar.
    To share, i have to add destination, but I can't add any destination

    The Share button is in your image. It's the last button in the toolbar and it appears active in your screen shot.

  • Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

    Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

    I'm a little confused by this?
    Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
    but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

  • Can i burn a dvd with final cut pro trial

    is it possible to burn a dvd or share a project in final cut pro trial or does it need to be purchased first?

    Yes, you can encode and burn the disk with the trial version.
    Russ
    PS: There is no difference in functionality between the trial and paid versions.

  • Final Cut Pro Trial won't let me export

    So I got the Final Cut pro Trial about 2 weeks ago and I was able to export 3 videos just fine. Now all of a sudden I just finished my 4th video, added commentary and everything else and it won't export. I don't see anything wrong with the project except for some reason the cross dissolve transitions won't render. Nothing is going on in the background, I've tried closing out the program, restarting my computer, nothing helps. I can export any other projections too. For some reason I click file, share, master file and nothing happens. I'm able to click it, but once I click it, nothing happen, where as before the export settings pop up. I always tried using the export option on the right, and the same thing happens. I checked and all the files are working fine, so it's not like any clips are missing. Can anyone help? Thanks

    Could you post a screen shot of the project libary and the toolbar?
    Reinstalling the app doesn't effect the events or projects. Sounds like some weird permissions problem.

Maybe you are looking for