HT4946 Device Backups are Missing When Selecting Restore Device

I have backed up each iOS device in itunes. However, when I right click on any device to see a list of backups by clicking Restore, most of them are not listed. What needs to happen for all backups to be listed?
I am using Windows 7 (x64) and the latest version of iTunes.

Hi Shaon,
Thanks for your reply. I definitely think it's related to disk IO, but I can't really get my mind around it. What i'm doing is creating a backup of the entire server (so Bare Metal, System State and some selected data folders). So the backup is taken of
the boot volume also (which contains the pagefile etc). However .. I create this backup on a separate volume using Iscsi. This volume is dedicated purely for backups.
To my understanding, Windows Backup should make a copy of the data (say entire c:\ volume) on the dedicated Iscsi. Backups following after this initial backup will make shadow copies of this copy (on Iscsi) containing the diffs between that point in time
and the previous? (right?). How will disk IO on the original volume (c:) affect the shadow copies on the Iscsi containing the backups? I also see a lot of shadows on the original c:\ volume, but these are not related to the backup right?
I definitely think to much IO on the Iscsi is the culprit (because I see a lot of warnings / retries on the Iscsi device) but I just can't understand why. Can you understand why this would happen? And why does this only happen when the Iscsi is nearing
its'max capacity? I seem to miss some concept about the backup-process before I can start to understand how to lower the IO on the Iscsi..
For your suggestions (thanks for that):
- The backups (shadow copies) are located on a seperate volume (also copies available on the original but non related right?)
- The backup volume does not contain the pagefile (its on c:)
- The backup volume is dedicated for this backup (of multiple volumes, but I don't see any way around this (bare metal + data is required))
Hope you can maybe help me shed some more light on this one.
Regards, Martin

Similar Messages

Records are Missing when we run Delta Load( FIGL-ACCOUNT ITEMS)

Hi,
Some records are missing when we run Delta load.
We have one generic data source on FAGLFLEXA table.
We select Field nm TIMESTAMP
TIME STAMP IS LOCAL.
upper limit is Blank
Lower limit is 1000.
we run this process chain every day.
we select delta settings is New status for changed records.
Please give me any idea why records are missing when we run deltas.
Thanks
Naik

Hi Anju,
Please ensure that you are following the below steps while Initilizing the application 13:
1. All the users in source system, must be locked.
2. Ensure that SMQ1 and RSA7 are having no data for application 13. Delete the application 13 datasource entries from RSA7.
3. Delete and refill the setup tables for application 13.
4. Run a INIT with data transfer load for the required datasources of application 13.
5. The Deltas can follow from the next day.
This will ensure that your deltas are fetching correct data. Note that, delta will pick up the same conditions on which the INIT load was run.
Please let me know if you need any more information.
Regards,
Pankaj

When client open folder with html files to preview web site, some pictures are missing when previewed.

However all images are in "images"folder. Same images are missing when previewed in Firefox and Explorer.
Any idea why?
Thanks.

Are you sending this other person all of the image files in
the same relative location as they are on your local computer?
For instance, if you are sending them index.html and your
images are in a folder called images, you should be sending them a
Zip file with the following enclosed:
index.html
images (folder)
image1.gif
image2.jpeg
If you are sending this type of structure to your other
party, check the links in code view. Make sure they are relative.
If they are, on the index.html page they would look like
images/image1.gif. If it says anything like C:/ or something that
points to a local drive they you will need to make sure the image
are within the site definition and then save the files
again.

Does not say "The oldest backups are deleted when your disk becomes full."

I am helping someone set up her backup, but I noticed that in the Time Machine window, there is no line that says: "The oldest backups are deleted when your disk becomes full."
She is running Mac OS 10.5.8, on a 2.66 GHz Quad-Core. Her first backup ran fine, but we're concerned that it will not delete older backups automatically to make space.

It works differently in Leopard and Snow Leopard.
In Leopard, the box is titled +Warn when old backups are deleted,+ and Time Machine will fail with a message when it runs out of room and that box is checked.
On Snow Leopard, the title is +Notify after old backups are deleted,+ and that's what happens -- the old backups are deleted, then you get a notice.
See #C4 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

Always assets links are missing when changing the location.

Hi community: Can you share your ideas with me?
Since adobe muse older versions, asssets files are missing when changing the location or computer. For example develop some project on "desktop" when it move to another location( ex: Another partition or folder with different name), assets says links are missing, we have to relink all assest, is there are any way to fix it? why is that keep happenings? when i design muse templates to sell, it is serious problems to me .
Can you help me, thank you community!

Hi,
Oracle have a tool for precompiling JSP's it's called ojspc
You can then turn JSP compilation off on the server.
Here's a batch file that I use.
Brenden
@echo off
set ORACLE_HOME=C:\[Jdev_install]\jdevstudio10133
if not exist %ORACLE_HOME%\j2ee\home\ojspc.jar goto error
java -Djava.compiler=NONE -Doracle.home=%ORACLE_HOME% -jar %ORACLE_HOME%\j2ee\home\ojspc.jar -extend com.orionserver.http.OrionHttpJspPage yourapp.war
goto end
:error
@echo ERROR: %%ORACLE_HOME%%\j2ee\home\ojspc.jar not found. Please set ORACLE_HOME to point to an OC4J or OracleAS instance and retry.
:end
if "%OS%" == "Windows_NT" endlocal

Why does message say application components are missing when trying to open Photoshop?

why does message say application components are missing when trying to open Photoshop?

The probable causes are:
A bad, or incomplete install
Inability of the program to access the location of those components
Deleted files, that are required for those components
What is the exact text of the error message?
Good luck,
Hunt

HT3819 My iMac had a corrupt seagate HD that had to be replaced my imovie files & itunes video library are missing when I picked up my Mac from Apple?

I purchased my 27" iMac in October 2010 after attending classes we discovered my computer needed new graphics card, hard drive, and a total rebuild after owning it only 6 months. Apple rebuilt my new computer, several months later same issues began yet again, slowly Apple began replacing defective parts they installed, my computer still hasn't worked as it should and has been in and out of Apple all the time sometimes they keep it for weeks! running tests?? February 10, 2013 I took my imac back in because it has been taking upwards of 6 minutes to make 1 single edit in imovie after 6 days of editing my project I could No Longer save in itunes, external HD, or export my imovie videos (they are 4 min up to 20 min max) Apple informed me that my Hard Drive was corrupt a bad batch of Seagate HD had been installed and my computer was again affected by this and it needed to be replaced and they couldn't get it to respond at all my itunes library was missing, etc. We saved my videos on my external HD I brought in with me. The Genius bar said they would call me in 3-5 days for me to pick up my computer. 9 Days later not hearing back from them I went in to get an update February 19, 2013 No one can tell me what was done except my HD was replaced they can't answer my questions about my itunes library being reinstated or my videos, music is missing, podcasts, etc. I was even using icloud, empty? They tell me IF I find anything wrong or not working again to just bring it back. My iMovie videos ALL the edits are missing ? I can't find ANY of my videos in my itunes my Library is empty as it is in imovie except for 2 videos? HELP! I can't imagine having to re-edit my entire video with sound effects, fronts, graphics, etc. I spent weeks on this :-( I'm at my wits end with my iMac.... I have searched in my previous itunes library EMPTY ! Waaaah! I want my mommy....

The Apple Store is not responsible for data loss and generally does not do any backups of your data before performing any repairs, though in some cases, as seems to be the case in yours, they guide you to making your own backup. Here's what they say on the "getting service page" (when I've taken a system in for service a similar statement was presented to me when I agreed to the service):
Many repairs require Apple to replace or reformat the hard disk, which will result in the loss of your data. Please make sure you back up your data on a regular basis to minimize your data loss. Learn more about backup options. Apple and Apple Authorized Service Providers are not responsible for any damage to or loss of any applications, data, or other information stored on your Mac desktop while performing service.
Since you say that you backed up your videos before the drive was replaced, why can you not just restore them? And did you not back up anything else?
If you didn't make any sort of backup of your other data prior to taking the iMac in for service, then sorry but your data is almost certainly gone. Regular reliable backups are a must, particularly when dealing with content you spend a lot of time creating. You may be able to re-download any content you purchased from the iTunes Store or Mac App Store, but anything else you'll have to recreate or re-obtain from the original source.
Regards.
Message was edited by: varjak paw

Artwork tab missing when selecting multiple tracks

osx 10.5.8
itunes 9.0.3
i'm having trouble assigning MULTIPLE pieces of album art to MULTIPLE tracks SIMULTANEOUSLY.
i see that i can add multiple arts to a single track by:
.. selecting a single track by highlighting -> get info -> artwork tab
.. selecting and playing a single track (so that the speaker icon appears to the left of the track in the playlist; paused or not) -> dragging artwork into the artwork pane in itunes; artwork gets added only to the track with the speaker icon regardless of which track(s) are highlighted. if there is existing artwork, new art gets added (does not replace old art).
also, adding a single piece of art to multiple tracks can be done by:
.. selecting tracks by highlighting -> get info -> info tab -> artwork field (note: artwork FIELD within info TAB of 'get info' dialog, not artwork tab)
adding multiple arts to multiple tracks simultaneously COULD NOT be done by:
.. selecting (highlighting) multiple tracks -> get info; ARTWORK TAB IS MISSING WHEN MULTIPLE TRACKS ARE SELECTED! there is only the artwork field in the info tab. setting this field with art resets any previous art -- the only art for the selected tracks will be the single piece you set in this field.
.. selecting (highlighting) multiple tracks -> dragging artwork into the artwork pane in itunes; artwork gets added only to the (single) track with the speaker icon (playing/paused) regardless of which track(s) are highlighted.
i've seen it done in (unknown version) windows itunes by:
.. selecting (highlighting) multiple tracks -> get info -> artwork tab (NOT MISSING!?)
pretty aggravating heh
help please.

haaaa
i just figured it out.
just above the artwork box in the lower left of the window, there is bar.
you can click on it to toggle between Now Playing and Selected Item.
this was my problem -- mine was on now playing. i didn't realize this was changeable.
thanks for motivating me to click at and around that artwork pane in frustration, guys. yay.
solved.

A new firmware update this morning and now all my backups are missing? How to re-connect?, A new firmware update this morning and now all my backups are missing? How to re-connect?

This morning I noticed my time capsule was blinking amber. I opened utility and I found that all of the airport devices needed a firmware update.
I ran that with no problems. I then found tonight that my time capsule had "delayed" backup and said it couldn't find the disk. I re-pointed it to the TC and it says I have no backups and wants to start from scratch. This is a concern and a bit annoying.
Any way to find my previous backups and reconnect it?
Thanks.

Looking in the time capsule preferences, it looks like the name of the disk has slightly changed to add a "3" at the end. Not sure how to change it back.
When I use airport utility and look at the disk, it says something like half the disk has been used, so obviously my backups are still there. Just not sure how to re-connect so backups aren't lost or duplicated.

Safari bookmarks are missing when ipad mini updated to ios 8.0

Safari book marks missing when ipad updated to ios 8.0

Sure, no problem.
Before the IOS 8 update, Apple's offsite file storage system for iWork was called "iCloud". I had dozens of Numbers files stored on this system.
Under the new IOS/Yosemite regime, the offsite file storage system for iWork (and now all kinds of other files, too) is called "iCloud Drive".
When I upgraded my iPad Mini to IOS 8, I selected "Upgrade to iCloud Drive" instead of "Not Now" because I accepted the fact that I would only be able to access my iWork documents on my Mini and the iCloud web interface, but NOT my Macbook (running Mavericks).
But now it looks like my Numbers files were not migrated for some reason. They are not available on my iPad Mini or the iCloud browser interface.
I called my wife at home to have her boot up the MacBook and try to access a few important Numbers files. She was able to open them and save a copy of each of them to the Macbook's local hard drive. So I guess my most urgent problem has been contained (I think I may have access to my Numbers files on my laptop), but it is still an open question why all my Pages files migrated from (the old) "iCloud" to (the new) "iCloud Drive" and my Numbers files didn't.
Clear as mud?

Composed looks / Change the look themes are missing when creating site from saved template

Hi,
I found an issue when save you own site template and then want to create a new site from that template the "Change the Look" themes are missing and if you go to site settings, Comosed looks where the themes are stored is empty! Anyone else has
the same experience? Any workaround for this?
regards
Martin

I've just seen this exact problem on a SharePoint 2013 farm as well this morning, but have managed to fix the blank "Composed Looks" list issue, although am still working on the "Change the look" wizard pages.
Edit: found a fix for this too now. See my next post below.
It appears that the process of saving a site as a template and then creating a new site from that template causes the original XsltListViewWebPart used to display the default view of the "Composed Looks" list, to be replaced with a ListViewWebPart,
which appears to be broken.
Edit: have also seen this behaviour on sites created from the built-in templates but haven't determined exactly whether this is a bug. ULS logs never show any errors when this occurs so it appears to be "by-design". Ugh.
There may be a tidier way to fix this, but for now, I used SharePoint Designer 2013 to copy an XsltListViewWebPart from a working "Composed Looks" list, AllItems.aspx page and replaced the ListViewWebPart in the broken Composed Looks list, AllItems.aspx
page with it. There is also some additional post copy-paste tidy up to do on the pasted-in XsltListViewWebPart HTML to get it to work within the context of the site it is now in as it will contain GUIDs and URLs that are only relevant within the site
that you copied it from and these need to be replaced with the GUIDs/URLs from the replaced ListViewWebPart - paste it in a notepad session before deleting/overwriting it so you can grab those bits.
I'll write a more detailed step-by-step if anyone wants it, but this doesn't seem to fix the broken "Change the Look" wizard still, only the "Composed Looks" list default view. I'll look into that now and post back more complete solution if I can
find a fix.
Edit: Found a fix. see my next post below.
Edit Edit: One more thing - on some Composed Looks lists we are seeing empty lists once the default view webPart is fixed up. To correct this, you can copy selected Composed Looks from a working site with a full set.
Before you do that, edit the default view in both the source and destination Composed Looks lists and include the Title field as it is a required field.
Then, you can use Datasheet View (just click the edit list link to put it in Datasheet View mode) to bulk copy/paste Composed Looks between the source and destination lists.
Do a little post-paste tidy up on the URLs as above to make sure that they are correct for their new location and then click on over to your Change the Look wizard.
You should see all of your Composed Looks displayed nicely on the page.
Note that the Current Look might not represent the sites actual appearance as it's settings will reflect the source sites appearance, but you can tweak it with the Wizard now.
Regards,
Glenn
Can you confirm your sharepoint patch level?

ITunes thinks songs are missing when they are NOT...

I've written about this in the past and I thought I had fixed it manually. For some reason a large number of my songs (about 1300) in iTunes are not able to be found on the drive when I try to play them. Once I try to play them I get an error message saying "The song "song name" could not be used because the original file could not be found. Would you like to locate it" and then the "!" symbol shows up next to the song. The songs files ARE there though.
In the past I thought I solved this problem because I "re-added" using all the songs in my library (about 4500) "File->Add To Library". If the song was one of these "missing" songs it was re-added to the library. The songs that were not "missing" were not re-added. (and again, the song files iTunes is re-adding are the exact song files it is saying aren't there in the first place) After the "re-add" I essentially had two of all the missing songs. One with the "!" and one without it. The newly added songs did not have any of the stats the original song had. So I used a script I was told about that goes through and syncs the song's statistics. Then after the song stats were synced I removed the "!" song from the library. I had to do this one song at a time. Of course, this took a VERY long time and I don't really want to go through it again... especially now that I know it may not be a permanent fix anyway!
However here is something new I noticed now that I have Leopard: The files that are showing up as missing are also the ones that don't have a "thumbnail" icon of the album cover in the finder. Also, if I go into coverflow view in the finder those files don't have the album as the other files do. However, there should be no differences between the files. For example, one album where each song was ripped at the same time in the same way will have some songs that have the cover icon and some that don't.
As I reported last time, this is not specific to one machine and has noting to do with the drive the songs are on. This also was happening on both 10.5.1. and 10.4.11 and lower.
So, why is this happening and how can it be fixed. I'm not going to re-import the songs because then I loose all my stats, ratings, etc and have to re-do the long method of fixin the stats.. There needs to be some way to permanently fix this problem. Is it with the song files or the library? Is there some sort of validation script that can be run?
Oh, on a side note... pre-leopard the "!" would show all the time. Now, if I close iTunes and re-open the "!" are gone until I try to play the song that should have the "!". This makes things even more challenging because I can't quit iTunes if I want to know which songs are "missing".
Jeff

I have this same issue. I use an external HD connected to an Airport Extreme Base station to store my music. On Tiger 10.4.11 iTunes created a music database just fine and found every mp3. I just installed Leopard last night and left iTunes to create its database overnight. It found every song, but there are plenty with the exclamation just as you described. If I want to play these songs I must hit "Yes" to locate the song manually. I can then play any other song with an exclamation point in that particular album, but if I go to try to play another song with an exclamation point from another album I must repeat the process again.
It's definitely a problem with Leopard as I just got my mac back from the Apple store with a replaced hard drive. I created the iTunes database in Tiger on one day, then the next decided to purchase and install Leopard. So one day passed between each instance of building the database and it worked fine on a clean install of Tiger but not on a clean install of Leopard.

I receive an error message that some of the application components are missing when trying to open Photoshop CC 64-bit

Hi,
I'm using Windows 8.1 and I can see photoshop CC 64 bit. But when I'm launching it, it throws an error "Some of the application components are missing from the Application directory, Please reinstall the application". I've reinstalled twice but getting the same error. Whereas the 32 bit application works fine. Any help?

Branching this to a new discussion.
Govinda_s13 are you still receiving the error messages referenced above?

In XP Infinity Blocks are missing when logged in as a user

On XP Computers when I am logger on as adminstrator there is no
problem. When my students are logged on as users, some of the
Infinity Blocks are missing.
For example on Ch 2.1 Sec 2.2 lab, the ITOGGLE Block is a question
mark. I can search and find it, but there is no way to add it the
VAB progam in place the question mark.
Can you help me out? Thanks,

This problem is has to do with "security" (AKA file permissions) for some of the VAB files. I am not aware of what may have caused the problem. As the USER check to see what problem files exist. Then as the ADMINISTRATOR check the "Security" tab in the file's properties and you'll find that the USER is unable to modify/read/see/etc that file. Changing the setting to match one of the "OK" DLL block files should correct the problem. Alternatively you can run the command line script that the installer runs: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F Assuming you installed in the default directory, you should be able to drop to a command prompt and issue this command. It will scroll the name of every file in the given directory and all subdirectories. It should reset every file.

Some letters are missing when I open a PDF in Firefox. Works fine in other browsers.

When I open a PDF using Firefox, some letters in words that are printed across the document are missing. I believe the creator of the document used a text box to add "Draft" on it. The D is missing. Other words I have found are "Copy Non-negotiable" and the C is missing. These same PDFs open fine in IE and Chrome. Have experienced it on V22-V25. Using Windows7

Starting in Firefox 19, PDF files will display by default in a built-in viewer. This viewer does not yet support all of the features of the Adobe viewer, and may also have some bugs. Other than changing viewers, as described in the following article, I'm not sure what to suggest.
[[How to disable the built-in PDF viewer and use another viewer]]

HT4946 Device Backups are Missing When Selecting Restore Device

Similar Messages

Maybe you are looking for