HT4946 How do I verify that my iTunes was backed up correctly?
How do I verify that my iTunes was backed up correctly?
iOS device backups and backing up the iTunes library are separate issues. To backup your iTunes library see this User tip.
tt2
Similar Messages
-
Attempted to update iTunes on January 23rd and it appeared to install properly. When I tried to open iTunes on January 24th, it would not open and gave me an error message that said "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" I then tried to reintall iTunes and it again appeared to install properly but when it attempted to open, I was given the same error message.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
I have successfully installed itunes 10, then get an error message that reads, itunes was not installed correctly Error 7 (Windows error 127)
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)". I did what was requested and reinstalled iTunes, but still get this error message. Help!
b noir I never got any message about an entry point
Many thanks. If we're looking at a "naked" Error 7, I'd start with box two in the following user tip:
Troubleshooting issues with iTunes for Windows updates -
How can I verify that an email was sent?
I was an Adobe SendNow Outlook user until early this morning, when I had to send an important document for a meeting this morning. SendNow for Outlook informed me that it just retired, and so I was directed to this Adobe Send cloud version. I was able to go in and send my document. And later I found the new Adobe Send Outlook plug-in.
But in the meantime, my recipient has not yet retrieved the document (according to the status). I'm wondering how I can verify/see the email I sent through Send. I don't see anything in the Adobe Send Cloud interface that allows me to see either the recipient email address or the text of the email. This seems to be an important component missing. Or am I missing something?
Keith
p.s. My recipient did finally view the document and I received my email verification, but I still can't seem to find the original text of the email!
Message was edited by: Keith JefferiesHi Keith,
Please see this post, which addresses your question: Text body of Sent messages
Please let us know if you have additional questions.
Best,
Sara -
JMS message compression: How do you verify that the message was compressed
Is there any way to verify that a JMS message which exceeds the "Default Compression Threshold" setting for the connection factory has actually been compressed. Does WL add any JMS property or header to the message to indicate that it has been compressed?
Thanks
Aspi EngineerTo my knowledge, please correct me if i am wrong, there not a property that indicates a message is compressed.
But i do know that compression only occurs when message producers and consumers are located on separate server instances where messages must cross a JVM boundary, typically across a network connection when WebLogic domains reside on different machines. -
HT201328 How do i verify that my iphone was unlocked without a new sim card?
I didn't recieve a message in itunes after the restore like others have.
Then it's probably not unlocked yet.
-
Pic related
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
How can I verify that iTunes charges are authentic?
How can we verify that charges from iTunes are authentic when there is no record of them otherwise?
If you purchased something, the charges are authentic.
If you did not purchase anything, the charges are not yours.
Contact Apple support and contact your credit card company. -
How do I verify that I have sufficient priviledges to start services for iTunes?
How do I verify that I have sufficient priviledges to start services for iTunes?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99575) -
How can I verify that I properly "SIM-unlocked" my IPhone 4?
As part of my service plan with Bouygues (France), I got an IPhone 4 which is "SIM-locked" and can not be used with another telephone operator.
After 3 months it is possible to organise the "SIM-unlocking" of the phone, free of charge.
I did so by contacting the customer support and performing the appropriate procedure with ITunes. Everything seems to have gone right, the IPhone 4 is as great a phone as it was before,
my question is simple, how can I verify that the phone is actually unlocked? a menu in the phone for example?
PatrickJust put a sim from a different carrier in and try it.
-
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
I accidentally synced my mum's brand new iPad to my mac book air. A few days later I realised that my iTune library on my mac is completely gone. So is my iPhone 4s after I synced it with my mac. How do I get my old iTunes library back? I tried using icloud on my iphone but it stated that I have never back up my phone before. So I guess my iCloud data is gone too? But I have back up my mac in my harddrive using time machine. So how do I get my old itune library back? Please help! Thanks!
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer. -
How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something. -
I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?
how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB
Maybe you are looking for
-
HI All, I have developed custom adapter, now i want to call one batch file inside the custom adapter. Can anyone help me in this? Regards, Kunaal
-
Hi Experts, I need good material on PI 7.1 Architecture. Also, some documentation on "how PI 7.1 is based on ESOA" can anyone provide some hints? Thanks
-
Export and Import Simultaneously
Hi All, we daily get requests to sync a schemas. ex: copy data from user a to user b (both users are in the same database) as usual we take export of user A schema and import into user B. This process takes somewhere around 80 to 100 mins ( after tun
-
How to push only 2nd iCal to iCloud
I have two (2) iCal calendars on my iMac. I want to push only one of them to iCloud. Where can I find docs that will guide me through the process. I already have an iCloud account.
-
while posting a grn from a po, an accounting document is prepared with the relevant GL entries. Can anyone please let me know how we can control what is populated in PO#, text columns in the document? Currently, the system is showing nothing in the t