HT4946 My Ipad is plugged into the wall. It is locked and telling me to backup to icloud. The ipad will NOT unlock, even after I push ok. Help!
My ipad is plugged into the wall. It is locked and telling me to backup to icloud. I can not unlock it even after I press ok. Do you have any advice?
A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.
Similar Messages
-
My Ipod will not unlock even after updating the software
Hi, I have an iPod Nano 4G, is locked to the Apple logo and iTunes will only recognize it when I go into hard disk mode.
and update your iPod with iTunes via the internet and everything was done in order but the iPod still has the apple logo screen
and check the test team that brings the same (Disco OK, OK Display, Touch control ok)
I do not know what else to do, I thank you beforehand all the help I can get
GreetingsDo you mean you can't unlock it?
We have no way of knowing exactly which online instructions you may have tried.
Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
iPod touch: Hardware troubleshooting -
My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?
Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html -
After upgrading iPad to iOS8, iPad cannot sign in to iCloud. Password is not accepted even after resetting it. Sign-in box keeps popping up. Suggestions?
This Apple Help page provides contact information for various countries for security problems with an Apple ID:
http://support.apple.com/en-us/HT5699 -
My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.
After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.
-
My MacBook Pro will not charge, even after resetting the SMC.
My MBP will not charge. It's only a little less than 2 years old. I've reset the SMC and even an employee at the genius bar has, it still isn't charging. When I plug in the cord, my battery remains at 13% with a plug icon inside the battery. When I click on the battery, it says "Battery Not Charging" in gray.
This is my battery information:
Battery Information:
Model Information:
Serial Number: 9G1300072D3MA
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 685
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5448
Health Information:
Cycle Count: 336
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11099
Please help!!When I plug in the cord, my battery remains at 13% with a plug icon inside the battery.
Try Troubleshooting MagSafe adapters
And try a different electrical outlet. -
Flash plugin will not install even after installing the latest version Flash
When I go to a site that contains Flash content, it says "A plugin is needed to display this content" and there is a link to install the plugin. Additionally, there is a message at the top of the page that says "Additional plugins are required to display all the media on this page" with an option to "Install Missing Plugins." I click the link to install the missing plugin, and a dialog box pops up that says "The following plugins are available:" and lists "Adobe Flash Player 11.0.1.152" with a check box next to it. The box is checked, and I click "Next" to install. It goes through the motions, and then tells me that "No plugins were installed." There is a link to manually install the plugin, which takes me to Adobe's Flash download page. I unchecked the box to pair McAfee Security with the download, and downloaded the latest version of Flash (to be honest, I've actually downloaded this exact same version about 10 times today). The dialog box pops up, I save the file, and once it has downloaded, I open the containing folder (my downloads folder). I then close all programs (including Firefox) except for the Windows Explorer folder that I'm going to run the installer from. I double-click on the Flash installer to run the installation. The installation process completes, the installer tells me that the download is successful, and my browser opens back up with an "Installation Successful" message from the Adobe website. Yay! My installation is successful... Orrrrrr not. Navigating back to the page with the Flash media - still have a message saying I need the plugin. Attempt to download plugin again...no dice.
THEN, I go to "Manage my add-ons" thinking maybe I need to enable the plugin. There is no Flash (or Shockwave) plugin listed on any of the menus - it's like it doesn't exist.
I downloaded the latest version of Java because I read somewhere that Flash requires Java to work; I installed the "Add-On Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, as best I can tell.
I also went to Adobe's page where you can see what version of Flash you're running (http://www.adobe.com/software/flash/about/) and it doesn't even show that I have Flash installed. In Internet Explorer, it does show that I have Flash installed, but it's the previous version (but that is likely due to the fact that I downloaded Flash from Mozilla, not IE, and they use different modes in each browser - so an update that you download from one browser does not necessarily apply to the other browser).
So in summary: I do not know what on earth is wrong here, but I am about as frustrated as I have ever been in my life. I don't know why the Adobe Flash installation is saying it is successful (is it lying to me??), but there is no plugin showing up in my Manage Add-Ons menu, and I have googled every possible combination of the content in this post and have not found a solution that works yet.NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe -
The print carriage will not move even after the paper jam has been cleared
I had a paper jam this morning and cleared it out completely. I keep getting a message on my HP ENVY 4500 that says the print carriage cannot move. Open the ink cartridge access door, clear any paper jam or obstruction, ensure ink cartridge levers are lower and snapped.
Hi Loleatha,
Welcome to the HP Support Forums!
Is there any visible error message on the Screen of your printer?
You can follow the steps in this link to try and troubleshoot the issue.
Hope this helps.
Thanks!
IdleHands
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Regards,
IdleHands
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. -
I-tunes will not install. even after i used all of the help offers.
Okay so, My computer has JUST recovered from a huge virus that decided to completely demolish everything but the computer was still able to be fixed. So i reinstalled windows and most of my drivers. Now i am trying to install I-tunes and it keeps giving me the message: An error occurred during the installation of assembly 'Microsoft.VC80.CRT,publickeyToken="1fc8b3b9a1e18e3b",type="win32",Version=8.0. 50727.762",processorArchitecture="x86"'.Please refer to Help and Support For more information. HRESULT: 0x80070424.
so if anyone has ANY idea what that means i would love for you to tell me cause its starting to anger me tremendously.An error occurred during the installation of assembly 'Microsoft.VC80.CRT,publickeyToken="1fc8b3b9a1e18e3b"
,type="win32",Version=8.0.50727.762",processorArchitecture="x86"'
.Please refer to Help and Support For more information. HRESULT: 0x80070424.
Not the most common of iTunes installation error messages. That one often seems to be a side effect of the same problem that causes error 8007000b when you try to install Windows Vista updates.
To doublecheck, try getting some Windows Updates. If they error out with an 8007000b, try the following Microsoft troubleshooting document:
http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-8007000b
If that fixes your 8007000b, does your iTunes installation also go through properly afterwards? -
Firefox 5 hangs after new install at Checking the Add Ons and will not start even after reboot
Downloaded V5, ran the install, started Firefox and first screen is 'Checking Add Ons', the status bar is shown and immediately hangs. Have tried to restart, have rebooted and start and Firefox will not come up. Have to drop back to V3.6
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
This can be a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update. -
I have a sixth generation ipod 16gb nano. It will not turn on. I have tried hoding down the power button with the down volumn button without results.
Any other suggestions?i have the same problem...my ipod is 4th generation?uggghhhhh
-
I have done everything suggested by Apple. It does not show up in iTunes. It is a model A1288. It was working fine until the battery ran down. I hate to throw things away.
After charging overnight
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello Mozilla/FIREFOX I just updated to your latest version and now my NETFLIX nor my YOUTUBE plays anymore. I just get a black space without any volume or play symbols - this isn't working for me. I donated to your organization as I am a supporter but you'll need to honor your side of the street. What are you guys doing to fix this and by when will it be resolved?
Hello,
The Refresh feature (called "Reset" in older Firefox versions) can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' When you use this feature, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Refresh Firefox - reset add-ons and settings]] article for more information.
To Refresh Firefox:
# Open the Troubleshooting Information page using one of these methods:
#*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Refresh Firefox" ("Reset Firefox" in older Firefox versions). Click on it.
#Firefox will close. After the refresh process is completed, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!
Thank you. -
I updated my facebok app after the app store said that it needed to be updated and ow the app wont load when I try to open it. I have tried to install and reinstall the app and I have also rebooted the phone several times with no results
try settings>general>reset>reset network settings, i mean this sounds like its a facebook issue its self and that you would have to wait for another update, they were probably getting prepped for ios 6 and somehow this one got out for an update, they are usually pretty good about getting updates out.
Maybe you are looking for
-
Please excuse the lousy table...Its late :-) I have a multi-server SP2010 farm. Patched up to Configuration database version: 14.0.6106.5002 My goal is to have a claims based web application that authenticated to ADAM for Extranet. I have configure
-
Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"
Hello, I have a big problem. I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working". I already tried all solutions from Google for t
-
Item category TAK - free of charge
Hello! We use item category TAK, but now face the request to send TAK items free of charge. Normally i would use order type FD, but this has no assigned item category for "0001 make-to-order" No item category available (Table T184 FD 0001 ) Now i wo
-
Is Outlook Mail Client non-negotiable??
I'm trying to install the Facebook app on my touch. Actually, this is the first app that I'm trying to install. I am getting a message while in iTunes "Either there is no default mail client or the current mail client cannotfulfill the messaging requ
-
Unable to Find supply demand Item
Hi All, While attempting to open a item from Inventory >On Hand> Item Supply Demand > I am getting the following error. Please assist me. Date falls outside the boundaries of the workday calendar Cause: The current date is outside the range of valid