HT4946 My ipad is saying to connect to itunes but I did and it says ipad is in process of recoveryso must restore and that all media will be lost. I have textbooks for school in kindle app on ipad, will they be erased?
I was trying to download an app on ipad2 when it said i had to download latest version of software by connecting to itunes My ipad 2 is stuck on screen saying connect to Itunes but once i do then itunes says it is trying to recover the ipad and gives me two choices either to restore to factory and all media will be erased or to cancel and stay stuck without use of ipad2. Im worried about trying to restore to factory because my college textbooks are in my kindle app on that ipad and I CANT LOSE THEM! Please help
Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Similar Messages
-
on my ipad it says ipad is disabled connect to itunes but i try and connect it to itunes and says i needvto wright the password in the ipad first but cant help please
I have the same problem with my ipod touch ... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
connected my iphone to itunes earlier today...it was working fine...now i get an error message saying that my phone is in recovery mode...needs to be reset and that all media and contacts will be deleted.....is this really true? or is there a solution
No it's not true. It's one big practical joke being played on you by Apple.
-
I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........
This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.
-
I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes screen on. It won't go away and I have tried restarting and turning off my phone various ways various times. I don't know what to do!
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
I updated my iphone to the new version and now it tells me to connect to itunes which I did and it's not doing anything else, what do I need to do?
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore -
pleassse help im locked out of my ipad2 it tells me to connect to itunes but when i do itunes tells me i need my passcode and it wont let me get into my ipad how can i restore my ipad without having to connect to itunes is there another way
If you're unable to do a Restore, go into Recovery Mode per the instructions here.
-
Help please!!!!
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
My iPod touch 4th generation says on the screen to connect to iTunes. When i connected it to iTunes, it says i must restore my ipod for it to work. However, I have over 6,000 pictures that I've taken over the past two years that i do not want to lose. What do I do? I already tried resetting it by holding down the home/power button, that doesn't help.
Elitegate, the poster siad his iPod has the Connect To iTune screen, You can't backup the iPod when in that mode.
Elitegate wrote:
Make a backup with iTunes to secure your photos. Then restore your iPod. After that, restore the iPod from backup. (Not as a new one.) -
so recently i wanted to load my friends music onto my phone because my laptop broke and i had no other way to get my music. i loged out of my itunes so the music could load without any problems. i tryed to so an update on the softwear today and my phone says i need to conncect to itunes, but when i try the only option is to restore it! that would mean all my things on my phone GONE. please help i cant live without a phone for long but i dont want to have to restore it. pleaseee please tell me somone can help.
The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way. -
I need help updating my iphone. After I upgraded the software, it then told me to connect to itunes. I have updated my itunes, and then connected. then a box popped up saying my iphone is corrupted... what do i do now? i also deleted my iphone backup in the device section of itunes. i got that info off of reading other post about this problem.
uhoh, i can't remember, the window that had the message is gone now. i deleted the back up on itunes and when i just tried again, its now saying its will take 400 plus hours .... i think i've really screwed up now
-
My ipod has been disabled and it says that i need to connect to itunes , however when i connect it it says that i cannot fix because i have a passcode on it please help, im almost bawiling my eyes ... please help
iOS: Unable to update or restore
-
I can't contact support directly because I need my serial number to enter chat. You access the serial number on the phone under settings. I can't because the phone won't turn on, it just says connect to iTunes. I can't call for support, because again, the phone doesn't work and I don't have a landline. Is there no way to avoid losing all my contacts, texts and pictures?!? I'm freaking out.
Your iPhone is in recovery mode.
Anything that you did not back up has been lost already.
You need to restore the phone using iTunes. You can restore from a backup once the software is reinstalled.
~Lyssa -
My ipod displaying , ipos is disabled connect ti itunes so i did and it didnt work
need help
Same answer as when you last asked the saem question:
the ipod and the ipod sin creen remains saying need to connect to itunes. need help -
It says I cannot connect to iTunes, but my internet and everything is working fine
.
1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.
Maybe you are looking for
-
How to delete material from meraterial mast
Hi Guru Some wrong material are created on Pre - Production Client, we need to delete those material. i done following step. Use Tcode - MM06 for Deletion Flag for material. after this use MM71 Transaction for archive material while MM71 Transaction
-
Report on EWT - Report on tds deducted till issue of tds certificate
We have implemented ewt recently. we want to have report which will give the tds deducted on advance, invoice , tds challan updation, tds payment, tds certificate issued etc. Do we have any T code which will give the tds details vendor wise for the a
-
I don't know why but a couple of days before, I opened a website and suddenly it became slow. Then the next day when I was opening something which I forgot what it was, and then it went black and I tried every button and suddenly the front row appear
-
Overlapping labels in Scatter Graph - Web Dynpro for Java
Hi We have created a Scatter Graph in Web Dynpro for Java. The xValue and yValue are obtained from a node. We are showing a name as the label on each point so plotted on the graph through Chart Designer (Format->$Label). The issue we are facing is: W
-
Hi guys! I need to disable the left-click event on a button, but not the right-click one! I don't want to catch the mouseClickedEvent and then to find if it was the left or the right button to be pressed because left-clicking on a button makes it "ap