HT4972 do I need to copy all files on my iphone to update from 4.3.3 to 6.3

do I need to copy all files on my iphone to update from 4.3.3 to 6.3

Read the instructions in the article from which the statement was posted.

Similar Messages

Hard drive failing on Macbook 13" OS 10.7.3 Need to xfer all files to an iMAC 21.5. How to do this?

Hard drive failing on Macbook 13" OS 10.7.3 Need to xfer all files to an iMAC 21.5. How to do this?

Can you boot the MacBook into FireWire Target Disk mode? That turns it (temporarily) into an expensive hard drive. You can then move files.
Another way would be to use an external hard drive, attach it to the MacBook and user software such as Bombich's Carbon Copy Cloner to copy the hard drive (assuming you have sufficient space on the iMac.)
Best of luck. Please keep your data backed up in the future to avoid this. It'll make your life easier.

Copy all files and renaming them

Hi
My SQL script needs to copy all backup files in a folder to another one while renaming them at the same time by adding the time stamp like this: Originalfilename[Timestamp].bak
Basically the script looks like this:
declare
@cmdstring varchar(1000)
declare
@filenamestr varchar(100)
set
@filenamestr =
CURRENT_TIMESTAMP
set
@cmdstring =
'copy \\Webserver\BackupStorage\SQLbackup\*.*
\\Webserver\BackupStorage\SQLbackupArchive\'
exec
master..xp_cmdshell
@cmdstring – this part is not complete
What code needs to be added to rename each file during the copy process?
Patrick

SET NOCOUNT ON;
declare @sourcepath varchar(1000) = 'C:\temp\',
  @destinationpath varchar(1000) = 'C:\MyFiles\'
CREATE TABLE #FileList
     FileID INT IDENTITY(1, 1)
    ,Line VARCHAR(512)
CREATE TABLE #temp
     isFileThere BIT
    ,isDirectory BIT
    ,parentDirExists BIT
    CREATE TABLE #output
result varchar(500)
DECLARE @Command VARCHAR(1024)
, @RowCount INT
, @counter INT
, @FileName VARCHAR(1024)
, @FileExists BIT
SET @Command = 'dir '+@sourcepath+' /A-D /B'
INSERT #FileList
        EXEC master.dbo.xp_cmdshell @Command
DELETE FROM #FileList
WHERE Line IS NULL
SELECT @RowCount = COUNT(*)
FROM   [#FileList]
SET @counter = 1
WHILE ( @counter <= @RowCount )
    BEGIN
        SELECT @FileName = [Line]
        FROM    [#FileList]
        WHERE   [FileID] = @counter
        SET @Command = 'copy /-Y
'+@sourcepath+'*.txt '+@destinationpath
  insert into #output
     EXEC master.dbo.xp_cmdshell @Command
     SET @Command = 'REN
'+@destinationpath+''+ @FileName +' '+ LEFT(@FileName,CHARINDEX('.',@FileName)-1)+'_rename.'+SUBSTRING(@FileName,charindex('.',@Filename)+1,len(@FileName))
     print @command
        SET @counter = @counter + 1
        IF LEN(@Command) > 0
            EXEC master.dbo.xp_cmdshell @Command
    END
DROP TABLE #output
DROP TABLE #FileList
DROP TABLE [#temp]

Copy All Files From Folder1 To Folder2

I need a powershell script that will copy all files (not shortcuts, omit those) from folder1 to folder2. The files are various types ranging from file folders (will want the contents of the folders copied as well) to .xlsx, .docx, .tiff, .jpg etc
(and more).

Hi,
You can check the repository if you're looking for prewritten scripts:
https://gallery.technet.microsoft.com/scriptcenter
If you don't find what you need and you can't write your own, you can request a script here:
https://gallery.technet.microsoft.com/scriptcenter/site/requests
If you want to try to tackle this problem on your own, I'd suggest looking into Copy-Item or just using robocopy.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Can't copy all files from a CD-R

I have a number of CD-Rs of family photos. I made the disks on a Dell PC with a horizontally mounted CD-RW Drive in 2005. I recently tried to load them onto my iMAC, but I could only copy about half of the files before the drive hung-up. The drive would often make noise and then slow to a near inaudible crawl and then say the file(s) could not be copied.
I was able to copy the missing files to a memory stick at a local library on an HP PC with a horizontally mounted drive, so the disks are OK. Interestingly, I had trouble with the disks at a library with iMAC-like HP PCs, i.e., all-in-one monitor/pc/optical-drive with a vertically mounted drive.
Other drive-related problems: (1) friends have trouble playing Audio CD-Rs I've made for them, (2) I can't copy a DVD-R with MackTheRipper (PowerPC), the DVD-R plays fine.
Is this a drive issue, a drive orientation issue, or something else?
Thanks for your help.

Hi all. I am trying to copy all files from a flash: on a CME to a
usbflash drive. I am able to do so, but only one at a time. Is there
a away to copy all files at one time so I dont have to name them
individually when copying all of them over? Thanks.
Check out the below link hope to help !!
https://cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml
Ganesh.H

I need to copy all my texts from my iPhone 5 to my new iPhone 6

I have just bought the new iPhone 6 and I need to copy all my texts from my iPhone 5

You need to restore your iPhone 6 from the backup you made of your iPhone 5.

Using Terminal to copy all files (hidden and not hidden) and folders from one place to another

How -using Terminal- can I copy all files (hidden and not hidden) and folders (and their contents) from one place to another

ditto
DITTO(1)                  BSD General Commands Manual                 DITTO(1)
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ...
           dst_directory
     ditto -h | --help
DESCRIPTION
     In its first form, ditto copies one or more source files or directories
     to a destination directory. If the destination directory does not exist
     it will be created before the first source is copied. If the destination
     directory already exists then the source directories are merged with the
     previous contents of the destination.

IN Premiere Pro CC how can I group copy all files in time line to another part of the time line

How can I group copy all files from one part of the timeline to another part

From the Premiere Pro manual (I believe track targeting matters, too. That is, the targeted tracks only are copied):
Copy command enhanced to operate on a range in a sequence
The existing Copy command (Edit > Copy, Ctrl+C (Windows), Command+C (Mac OS)) is enhanced when used in the Timeline panel. If there are no clips or keyframes selected, and an In Point or Out Point is set, then the range of time between the In point and Out point is copied to the clipboard.

I need to copy a file over to my mac from a CD but it won't let me due to read write permissions. is it possible to get around this?

i need to copy a file over to my mac from a CD but it won't let me due to read write permissions. does anyone know of a way to get around this?
any assistance will be much appreciated

i need to copy a file over to my mac from a CD but it won't let me due to read write permissions. does anyone know of a way to get around this?
any assistance will be much appreciated

Need to erase all content on my iPhone but wifi is dead and iTunes says i need to turn off find my iPhone, please help

need to erase all content on my iPhone but wifi is dead and iTunes says i need to turn off find my iPhone, please help

You do not need wifi to erase the content of your phone. Go into Settings>iCloud>Find My iPhone>OFF.

HT4528 I need to erase all contents on my Iphone 4. It will not recognize my password. Please advise.

I need to erase all contents on my Iphone 4. It will not recognize my password. Please advise.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Can I copy all pictures on my iPhone to my ipad as a group?

Can I copy all photos on my iPhone to my ipad as a group? Not one by one?

You can try this, it works when i connect my iPod Touch to my iPad using the Camera Connection Kit.
1. Connect Camera Connection Kit (USB) to the iPad
2. Connect iPhone to the Camera Connection Kit using the docking cable
3. The iPhone will be identified as a camera on the iPad
4. You can than select the photos you want to transfer to the iPad

I need to copy audio files and projects from logic to an external hard as my MBPis nearly full and my external hard drive has packed up with all my files on it, any suggestions on how do I copy 200GB from my MBP to a new external HD

I Use logic and back my audio file and projects on an external HD ,this has now packed up . I have all the files in the MBP , but need to copy them to a new external HD, I have only 10GB left on my machine , how do I copy 200GB from my machine to a new External HD.
any helpful full advice would be appreciated.
angus

Yes, just drag and drop them into the drive..
How long will it take? Hard to say without knowing the type and speed of the drives in question.. and even then it's hard to estimate... but does time really matter?
The fact you only have 10 Gigs left will/may slow the process down but it wont/shouldn't stop it...
If needed.. just drag and drop some of the files at a time.. not all of them.
Remember that copying files doesn't delete them from the original drive... You will still need to delete them yourself after they are copied over and empty the trash....
However....
When you saved these projects in Logic (Pro X?) did you save them using the include audio files option?
If not, then when you move the audio files used in these projects... Logic will not know where they are to reload them........ and that will cause you issues.
So.. if you didn't...
I would use this method instead...
Logic Pro X: Move, copy, and convert audio files

Finder copy doesn't copy all files

I have a dedicated disk for my Aperture masters, and to back this up while also defragging (according to a method described by Kevin J Doyle and Matthew Bergsma on the Aperture forum) I'm simply doing a Finder copy of the masters. I may have made a mistake when I relocated my masters a few months ago, because I put all 40,000 files in a single directory, at the "root" level of the drive.
I've searched around to see if there is a limit to the number of items in a single directory, and saw guesses but nothing definitive.
The problem is that when I try to copy the files, the Finder shows all 40,000 selected, but only copies 10,000 or so. I can't figure out why. If needed I can relocate the masters again into project folders, but I'm very curious why I'm seeing the partial copy.
Rob

I've got the same problem when copying multiple large files from the desktop to a network drive on Windows Home Server (using drag/drop). The files are about 1gb each, and if I copy more than one at a time, at least one will dissapear on the target machine. This is VERY repeatable.
When I watch it closely, I can see temporary files for all files appear, and the number of items, and the total size reported in the copy status on the Mac are correct. In fact, it takes about the correct amount of time for the total size copied. However, when the copy is complete, some of the files on the target drive vanish. There is no error dialog, files just go poof. Dragging the missing files again works, as long as no more than one is copied at a time.
A test with a few small files works fine. This only fails with large files. The total copied is less than 2gb, so this doesn't seem to be a FAT32 problem. There is ample space on the destination drive (over 1Tb free). The Mac is on a wireless 802.11N lan.
- Bruce

Need to copy .txt file from FTP server and downloaded on local server directory.

I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.

Below links will help achieving it:
https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/

HT4972 do I need to copy all files on my iphone to update from 4.3.3 to 6.3

Similar Messages

Maybe you are looking for