HT4972 how about updating from 2.2.1 to anything

how about updating from 2.2.1 to anything. I get an unknown error message and cannot go any further.

Try on another computer
Then see:
-1 error
-1 error too
If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • HT4972 how to update from 4.3.5 to ios 5

    how to update from 4.3.5 to ios 5

    Connect to iTunes on the computer you usually Sync with and check for Updates...
    Full Details Here  >  Updating to iOS 5  >  http://support.apple.com/kb/HT4972

  • How to update from 10.6.8 to anything higher and what?

    I bought my iMac10,1 Intel Core 2 Duo in 2009. Today I run the systemversion Mac OS X 10.6.8 and don't know how to further update/upgrade to reach a min. of 10.7. My e-banking software e.g. requires a minimum of 10.7 to be able to further use the secure banking software... I read about updates to Mavericks but obviously I don't know which app to choose in the app store. Nothing seems to refer to be correct, I only find tutorials and learnings and videos etc. Can anyone help me with a useful next step to do? Thanks a lot!H

    You have App store in 10.6.8 and that will enable you to go directly to Mavericks or Yosemite.  The latter is a big download so be patient.  Going to Lion (10.7) is a waste of time in my view.
    Three checks to make.
    Any upgrade above 10.6.8 wiill mean that any PPC programs will not work.  To check out the situation go to ...
    http://roaringapps.com/apps ... 
    or an extensive read courtesy of A Brody.https://discussions.apple.com/docs/DOC-6271
    And to check out the specifications needed.   http://support.apple.com/en-us/HT201364

  • HT4972 How to update from iOS4 to iOS5 ?

    Hello ! My iPad iOS4 now . How can I update ?  Because never come information for update iOS of my iPad .

    You can only update a device to the highest iOS version that it supports, which for an iPad 2 is iOS 7.0.4 - for how to do it follow the instructions on the page that you posted from.
    Connect the iPad to your computer's iTunes (you will need the latest version installed) and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad via File > Devices > Back Up.
    Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button

  • HT4623 how about updating an older ipod which does not offer "software update" as a choice when one taps on General under Settings?

    how about updating an older ipod which does not offer "software update" as a choice when one taps on General under Settings?

    http://support.apple.com/kb/HT4972
    Unless you have a 2nd generation iPod Touch, in which case 4.2.1 is the highest possible.

  • HT4623 how to update from version 4.1 to 6.0

    how to update from version 4.1 to 6.0

    What do you mean unlocked one?  You are talking about software updates here and software updates are free and for a 3gs you can only update to 6.1.3 as you have already been told.
    If you are talking about phones themselves, then this is totally different and you need to be more specific or get your question right.
    There is no unlocked software update - it s free.

  • How to update from 4.2.1 to iso 5 or higher

    how to update from iso 4.2.1 to iso 5 or higher. Not able to download certain apps that are iso 5 and higher. Need help please

    The iPhone 3G can not be upgraded beyond 4.2.1.

  • HT4623 When i go to Settings General there is no option for software update.  Can anyone tell me how to update from 4.2.6

    Can anyone tell me how to update from 4.2.6? 

    Check to make sure you don't have two firewalls (i.e. a Windows firewall and one on your router).
    If that's not it, you may need to dig deeper ... like temporarily changing your router's DNS to use Google's DNS or OpenDNS instead of your ISP's DNS.  Or maybe open up a certain port on your router (not sure which one that would be though, sorry).  Or, if your computer is connected to the internet over wi-fi, try connecting to your router (or modem) via Ethernet, I heard of that solving a problem like this (though I can't confirm if that was real).

  • HT3406 How to update from 3.1.3 ver to a higher ver.

    How to update from 3.1.3 ver to a higher ver.

    Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to the newest iOS release supported by the device’s hardware.
    The maximum iOS version for the original iPhone and first generation iPod touch is 3.1.3.
    (90364)

  • How to update from 3.1.3 to 4.3.3, but not to 4.3.5?

    Hi, I want to know how to update from 3.1.3 to 4.3.3, while the newest iOS version is 4.3.5
    I think Apple won't let me update to 4.3.3. Does anybody know how to do it?
    Your answer would be deeply appreciated. Thank you

    UPDATE TO IOS 4.3 MANUALLY(CANNOT UPDATE TO 4.3 BY APPLE SOFTWARE UPDATE)
    FIRST= Download the iOS 4.3 IPSW file for your device FROM NET
    SECOND- Connect your device to the computer using the USB cable and wait for iTunes to detect it.
    THIRD- Once your device has been detected – follow the steps given below for different OS.
    For Windows – Hold the Shift key and then click on the "Check for Update/Update" button.
    For Mac OS X – Hold the Option key and then click on the "Check for Update/Update" button.
    4-
    In the next dialog browse to the file that you downloaded from Step 1 and select the IPSW file.
    5
    iTunes will now use the IPSW file and update your device to iOS 4.3. The process should take around 10-20 minutes.
    That’s it. Your device will be updated to iOS 4.3 with ease.

  • HT4623 How to update from my iPod iOS  version if I have a version 4.3.2 and update it only from the iPod I know how to do it from the pc

    How to update from my iPod iOS  version if I have a version 4.3.2 and update it only from the iPod I know how to do it from the pc

    There are no specific instructions for your problem. If you use this it tells yo what is inside and how to take it apart.
    http://www.ifixit.com/Teardown/iPod+Touch+4th+Generation+Teardown/3562/1
    One of the nine guides here will tell yo how to put it back together and how to do specific things.
    http://www.ifixit.com/Device/iPod_Touch_4th_Generation

  • HT4972 How do update an iphone 3g from ios 4.2.1 to a newer ios?

    How do update an iphone 3g from ios 4.2.1 to a newer ios?

    You can't. iOS 4.2.1 is the last version an iPhone 3G can run.
    Regards.

  • How to update from 4.9 to 5.5

    How do i update from 4.9 to 5.5? I have tried to get the update through Tools-Get Updates, but that says could not be downloaded, ty again later. Tech Support says to buy online or at store(Staples, etc).
    How do I proceed?
    thanks
    Chris P. 
    Network Magic Ver.: 5.5.9195.0-Pure0; Connection: Brighthouse Road Runner; Modem: Linksys; Router: Linksys WRT54G; Firmware: 4.21; XP Home SP 3 Laptop: Wireless; XP Home SP 3 Desktop: Wired; Norton Internet Security 2009; Spy Sweeper 6.1
    Solved!
    Go to Solution.

    Hi Retired07, 5.5 is a paid upgrade ($25) for 4.9 users.  Before upgrading, please note that 5.5 does not support Net2Go, and if you need to use Net2Go, you should make sure the computer that uses Net2Go on your network does not get updated to 5.5, you can intermix 4.9 and 5.5 systems on your network.
    To upgrade, follow these instructions:
    1. Write down your actviation key (In Help>About), you will need it.
    2. Go to http://store.purenetworks.com/storefront/add-to-cart-simple.ep?skuCode=NMPU&qty=1 and type in your product key to purchase the upgrade.
    3. Uninstall NM 4.9 on the computers you want to upgrade 5.5 to.
    4. After the reboot, delete the Network Magic Directory in c:/Program Files/Pure Networks, delete temp files and run disk clean up, reboot again.
    5. Go to http://www.purenetworks.com/download/thankyou.php to download NM 5.5
    6. After the inital setup wizard, go to Tools>Actviate and enter in your actviation key, use the network map to remotely actviate your other newly upgraded 5.5 systems.
    I know there are a lot of steps there but upgrading from 4.9 to any 5.x release has been a problem for some users in the past, thats why I recomend a clean install of NM 5.x on systems that have had 4.9 installed.
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • How to update from Yosemite Beta 6 to Public Release?

    Does anyone know how to upgrade from the Yosemite Beta (6th release) to the final release? I don't think Apple is suggesting it, but I'm not going to roll back to Mavericks to then upgrade to Yosemite again, but I want to make sure my OS isn't stuck on the 6th Preview.
    When I go to the App Store to update, it says I'm already on Yosemite, but still shows "Download" as an option. Want to be sure I'm not missing something.
    Thanks!

    When I look in "about this mac" - it says Yosemite 10.10. Do I really need to download it again?
    I found on a blog that someone contacted the Apple service:
    “simply install the final version of the software you are testing when it appears in Software Update” – that means the final version of the beta software you are given to test is what will be made public. So we’re on the same build as what is now in the App Store.
    My compute OSX is 10.10 but build is (14A388b) while some say that app store version is (build 14A389).
    Does it really make a difference? If I don't download it will it continue to update?

  • How to update from Windows 8.1 Eval to Full version ?

    Hi All,
    I have a issue. I had installed the Windows 8.1 Eval 90 days edition. I need to update this to Full version by entering the product key.
    But how ever it is not accepting it. Is there any other way of updating from Windows 8.1 Eval to full without loosing data ?
    Gautam.75801

    Hi Guys,
    Thank you. 
    I have decided to wipe out and do a fresh installation. For time being i have altered the OS files which is not recommended to avoid automatic restart for every one hour using the below.
    http://nepalitalks.blogspot.in/2013/02/how-to-stop-windows-8-evaluation-from.html
    Gautam.75801

Maybe you are looking for

  • How to specify the functions of buttons in a .jsp

    Im working on struts frame work and I want to add 3 buttons to a jsp as cancel,reset ans submit. I have done it like this. submit and reset buttons are working properly but when click the cancel button it gives an error like this. Error ------ messag

  • Mixed content - https and http

    Guys and Gals - I have a page that has mixed content - http and https. Users talk to my webserver using https, which talks to the portal server using http. The browser popups a warning saying that the site has mixed content. Is there any way to preve

  • URGENT: Superdrive help needed.

    I have bought the new iMac, which evidently doesnt have an optical drive, so bought a superdrive from apple. Bootcamp doesnt recognise the super drive saying that no usb drive is found. The superdrive is clearly plugged in and working, playing cds so

  • Using CAF GP for Approving MDM Record Request.

    I am going to use CAF GP for approval workflow. I need to understand how to approvve the record using Java API. I know it needs to be moved from checked out stage to Checked in stage. But how do we do that from Java APIs. I am using SP4 for now, but

  • Time Capsule Hard Drive Recovery?

    My TC failed this evening with the dreaded power supply problem that has been sweeping the nation. I am going to purchase a new one very soon (I need to back up after all). But, I have very important documents on my TC that has failed that I need to