HT4972 How do I setup my I-pad 2 to print with a wireless printer on my home network

How do I set up my I-Pad 2 to print to my network printer (which is a HP 8600 Pro) ? It printed just fine until I up graded to 7 OS.

Wireless Direct Setup
On Printer
1. Turn on HP wireless direct from the printer’s control panel.
2. Select Wireless Direct, and then select “On”.
On iPad
3. Settings>Wi-Fi>Look for printer>Connect to the HP wireless direct network.

Similar Messages

How can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated

how can i say yes to automatic updates when they stop my wireless dlink to Virgin home broadband from getting on the internet and then i have to do a system restore to the day before the update to get it back to normal?!? Frustrated
== This happened ==
Not sure how often
== automatic updates go on my computer, say if i click yes to update when shutting down

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

How can i set up my iPod touch to work with a wireless keyboard?

How can I set up my iPod touch to work with my wireless Apple keyboard?

What Apple keyboard?The original Apple white keyboard with four batteries tonot work with any iPods
What model iPod? Only the 3G and later support BT keyboards
iOS: Third-party Bluetooth headsets, headphones, and keyboards
Wireless input devices: Bluetooth frequently asked questions

HT4972 How do I update my I pad 1?

How do I update my I pad to the latest iOS 5? Not sure what version it is on now

You will likely need to follow the instructions found here: http://support.apple.com/kb/HT4972

How do we link an I pad to a printer?

I have spent some time looking through apples FAQs, but find no references to printing, other than "air printing"!!!
I have no idea what that is. Just want to find out how to link the I pad to a printer, and using what to do it with.
Any help would be gratefully received.
Thanks. Clive

Hello,
Use AirPrint, see this article for more info: http://support.apple.com/kb/HT4356
NOTE: Apple Support Site is down temporarily, you will need to wait until it is back up.
If your model is not listed, you may use Printopia: http://www.ecamm.com/mac/printopia/

How do you setup GNU/Linux on an iMac G4 with Panther OS X 10.3.9 ?...

How do you setup GNU/Linux on an iMac apple computer
http://en.wikipedia.org/wiki/IMac_G4
with Panther OS X 10.3.9
http://en.wikipedia.org/wiki/OSX10.3 ?...

There is a Ubuntu 10.4 version for Mac with PPC architecture; not sure
how that would work in the computer you may consider running it in.
Some leads on that kind of discussion can be found by using a Google
search, and the words: *ubuntu for PPC G4 Mac* + read through results.
Or choose to search using these terms: *Open Source Linux PPC G4 Mac*
A few results point back to Apple Discussions, where there were inquiries.
Note the version of a Linux-type of OS, compatible with Mac PPC hardware,
on the following page-link: *• Ubuntu 10.0.4 LTS (Lucid Lynx)*
http://cdimage.ubuntu.com/ports/releases/10.04/release/
{You would have to put the image, as downloaded from such a site, on a CD
for use as an Installer; then follow any instructions as available to install it.}
An old page (from 2007?) with some details, some not up-to-date,
may be of help to a limited degree, from here: Ubuntu PPC wiki
https://wiki.ubuntu.com/PowerPCFAQ#Is%20Ubuntu%20supported%20on%20PowerPC?
Or: https://wiki.ubuntu.com/PowerPCFAQ
See their home page to look for other information on the site: https://wiki.ubuntu.com/
These wiki groups are like communities, with rules & other such considerations; you
may be able to also find +Open Source+ sites with information and builds of suitable
Linux versions capable of running well in an older PPC Mac. There are newer ones
that would have no problem on a newer Intel-based Mac, of course.
• Mac Linux Links: (perhaps too dated)
http://lowendmac.com/linux/index.shtml
• Comparison of Linux distributions:
http://en.wikipedia.org/wiki/Comparisonof_Linuxdistributions
Hardware support in the older PPC G4 Mac computer should be considered, in order
to have the better experience possible with the Linux-based OS; and some specs in
an old Mac may not be ideal. The graphics processor unit and amount of dedicated
RAM for the graphics alone, could make a difference; depending on what you had in
mind when running a Linux-based OS in a PPC Mac. So consider hardware specs.
Some hardware in the computer may or may not be supported by the Software; and
then, there may be some problems implementing a Linux OS version in your Mac.
If you had an old Mac Mini (PPC or early Intel) & considered running Linux, there's
a page of general ideas worth a peek: http://sowerbutts.com/linux-mac-mini/
You may not have enough room on the existing internal hard disk drive inside the
iMac G4, for a complete OS X 10.3.9 or Later OS X, and a partition for Linux in it.
And, you may find through reading further, if you need to (or don't) start fresh and
have a partition for each different OS, or not. For organizational purposes and ease
of removing one system or the other, a partitioned hard disk drive may be best.
There probably is a way to have Linux on an external bootable hard disk drive; &
that would have to be compatible with the Mac hardware requirements to be seen
and used by the computer, and also the ability to restart from Linux into Mac OS X
would have to exist in the system software. Hopefully without incident.
You will have some degree of a learning curve in this matter, from reading up on
the details of any viable Linux versions, through the ones likely to work in your
old PPC G4 Mac, and then if there are more than two or three good ones, of those
what one would be most likely to be worth the additional effort to attempt to use in it.
Depending on the version and specifications of your iMac G4 computer, there could
be different versions of linux systems capable of running it. However, some items
may not be supported which you would need to have working, such as wi-fi internet
and sleep mode, etc; among others. Searching the net does bring up more info.
{You may find, that going to OS X 10.4.11 would be more worth the effort, in that
most everything would 'just work' and you can still find many good software bits
and some fine freeware or low cost shareware to run on it. Linux versions vary
so much on what they can and cannot do, I would not recommend running it.}
Since I am not an expert in the matter, hopefully someone with a experimental time
and results in a similar vintage Mac as yours will reply and give you insightful info.
Good luck & happy computing!

HT4972 How do I update my I pad model mc979ll

How do I update my ipad, model mc979ll, version 4.3.5, to iOS 5.1?

iOS: How to update your iPhone, iPad, or iPod touch

How do I setup a Samsung CLP300 color laser printer

I got this from a friend at work. I am running Tiger on my mac. I plan to update to Leopard soon, so I hope I can use this printer with either OS version. I got it home and hooked it up to one of my macs. It comes up with the name "Adobe PDF 8.0". When I go to the printer setup in System Preferences, it says it is unknown. It show up as a printer. When I try to print to it, nothing happens. Am I missing something? I think my friend said there was a CD that came with it. He is going to try and find it.
Any help would be greatly appreciated.
Thanks

Baby Boomer (USofA) wrote:
Repair permissions and then restart your computer afterwards.
!http://i50.tinypic.com/izvwo1.gif!
Tried this but it didn't fix the problem.
When I go into Print Utility and click "Add" I get back "Adobe PDF 8.0" as the printer name. If I click on it, I can not set the "Model". The Samsumg CLP-300 installation section says that it will show up as "Samsung", and I should enter the model number...
Not sure what else to try. Anyone else have any ideas?
Thanks

HT201320 How can I setup two gmail accounts on my iPad with iOS6?

Only one of my gmail accounts will send or receive mail. Why?

You should be able to add the email account to the Mail app like you add any account.
You can also go to Settings>iClould and change the iCloud account but you can't have both account on at the same time.

HT4972 How do I know if I Shoul update my iPad with ios5?

The e-mail message detail on right does not display

I'm assuming that you mean you cannot see the contents of an email message when you tap on it. I've had this happen occasionally. To fix it I quit Mail.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the Mail app until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

How can I share bookmarks from the toolbar of a PC from a laptop on the home network without having to export/import bookmarks?

I would like to be able to share bookmarks live (from the Toolbar Bookmark) - i.e., use the laptop to select bookmarks from the PC toolbar.
the laptop and PC are on the same network and network sharing could be enabled if required
Many thanks
Dan

thank you, trying to them setup up now, have some challenges with the 2nd device but I'll see how I go first

How do i know if my Mini will even work with a wireless printer?

I'm thinking of getting a wireless printer. How do i know if one will even work with my old Mac Mini?
A very elementary question, cuz i'v never done anything wireless before.
I guess i would follow the instructions of whichever printer brand i get.
But can you direct me to whatever Apple explanations there might be.
Thanky u.
It will be nice to get rid of all these wires, if i can.

Thanky. Yo guessed correctly, it is a MacMini 2.1.
My next Q for you:
How do i change my rating of your answer?
I graded it as Helpful.
But i see no obvious way to change it to the Solution.
Cuz you are 'this close' to 98,900 pts.

How do i connect my MacBook Air to a Printer on my Wireless Network

How do i connect my MacBook Air to a Printer on my Wireless Network ? The printer is connected to a PC running Windows 7. That PC is connected to my Wireless Network. MacBook connects fine to Network, but can't find Printer.

Hi Kappy,
Thanks for your response. I followed your instructions (for Mac OS 10.6.7). It seemed to set up OK, but when I tried to print I kept getting the following Failure Message "Session Setup failed : NT_Status_Invalid_Parameter".
When I get the "Advanced Window" should I enter anything into the "Location" field ? Maybe I am not entering the correct Workgroup, Server or Sharename ? Is there a way to make sure all of that is correct ? I went on to the computer that the printer is connected to and verified all of that, but am not sure I looked in the right places.
When I print via my Home Network from another Windows 7 Computer to the same PC, it works fine. I just can't get it to Print from my MacBook Air.
I thought of using the IP Address. How do I find the IP address of the Computer that is connected to the Printer ? Is it what they call the IPv4 Address, or the IPv4 Default Gateway ?
Appreciate any help you can provide.

Need help choosing how to extend my existing home network to my detached garage?

I have done as much research as possible on this scenario but cannot seem to match the ideal solution with my wants. Perhaps I simply just do not understand networking as well as I thought I did. Either way, any helpful information or suggestions are greatly appreciated.
Objective: Extend my wireless network to my detached garage.
My current ISP provider is Time Warner Cable. I have RoadRunner Extreme, which in my area gives consistent speeds of 50 Mbps download and 5 Mbps upload when I am connected via ethernet cable. When I upgraded to the "Extreme" package i found out I was forced to use their Motorola SB6580 ... its a DOCSIS 3.0 cable modem + wireless router. I was able to access the Motorola's setup options on the internet and I disabled the wireless function. This has allowed me to use my Time Capsule as the primary router to provide wireless access on my home network. I have not had any issues with this setup and is my preferred way to operate.
I have recently moved my home office to the 2nd story of my detached garage and need to extend my wireless network to meet the demands of all my gear. I have decided to achieve this goal by going with one of the following 3 options:
1.) enable the wireless function on the motorola modem making it the primary router. move my time capsule out to the office and use it in bridge mode. However I do not think I understand bridge mode correctly. I thought the secondary router (in this case my TC) in bridge mode needed to be connected w/ an ethernet cable at all times to enable this feature? If I understand similar networking discussions I will lose the ethernet ports with this option? If this isnt called Bridge mode once i take away the ethernet cable what is it "technically" called?
2.) buy a 2nd airport extreme base station and create the same type of wireless network extension setup. The difference here is I would leave my motorola's wireless features disabled, use 2 apple products that speak apples to apples wirelessly and relieve myself of all the headaches involved with a neopolitan setup. This seems like the obvious choice b/c Apple products are much more user friendly, but I dont want to spend the $200 on a new router if I can achieve a comparable setup by just enabling the equipment I already have.
3.) use either of these 2 scenarios above & go buy a 150' ethernet cable to join them together. if this is the case wouldnt a $50 hub suffice on the end of the cable? I dont necessarily need to have wireless, just reliable connectivity. I can access the existing wireless network now, but download speeds are not great and things really start to slow down when i have multiple clients connected. I would rather not have to drill through exterior walls, bury conduit and install learn how to install data wall plates, but i will if this is the pros far out way the cons.
Current modem/router placement: if standing @ the front door of my 1 story house facing out towards the street my motorola modem/router is in the front right-hand corner of the house.
Distance location of the detached garage office setup: if standing @ my front door my my work area is in the far back left corner of my property. it is approx 175' from the router and on the 2nd story of the garage. I said 150' cable earlier b/c i could relocate the router to a bedroom on the opposite end of the house, however this would eleminate the current wired status of the items connected to it and I would prefer to keep them wired in.
clients connected in the house: (4) apple tv's; Roku; Xbox; Wii; Playstation 3; (2) Lenovo laptops; iPad; (2) Blackberry's; (2) iPhones; iPod touch; (2) wireless netowrk printers; (2) smart tv's ... a handful of these are currently wired into the time capsule now which provides an uninterupted viwing experience for the MLB package. This of course trumps all opportunity costs involved with moving the router. There is nothing more frustrating than a screen buffering in the botton of the 9th inning after you've sat there for 3 hours.
clients connected in the office: (2) 27" imacs; apple tv; iPad; network printer; Wii; Harmony Link universal remote; Mac Book Pro ...
I have approx 5TB of digital media that is shared over the network via shared iTunes libraries that I would like to access as well. iCloud helps with all of our household gadgets as far as acessibility but with all the backups going on simutaneously it also creates headaches when you need the throughput. I need to do a better job of managing those settings. nonetheless, I would like some guidance on the best way to extend my current netowrk, suggestions for better scenarios i did not mention and thus am probably not aware of and any networking 101 schooling if it doesnt sound like i understand the way bridge mode/network extension works. sorry for the long post and thank you for your time & help.

Ethernet beats all other solutions hands down..
A single ethernet connection from wherever is the closest point in the house to the garage office... wins. You can plug a router working as AP and switch or pure switch on to it. Get a cabler in to do the job.. and they can probably figure it out and do the whole job whilst you scatch your head.. yes you will pay for it.. but a cabler knows how to do it. And most likely leave the inside network exactly as it is. Since office is important to be reliable.. there is one and one only reliable method.. ethernet.
If the garage and house are on one electrical circuit.. which is doubtful if it is a separate building then EOP adapters can often work well.. They do not handle earth leakage protection, breakers (rather than fuses) or meters at all well.. but if they are simply all connected to power.. behind the same meter and using old fashioned fuse box.. EOP rated at 200mbps or some now are 500mbps can work reasonably well. Speed about the same as wireless at its best but if it works when installed will generally not change with the weather, moon, and wind direction which wireless is liable to do.
Wireless bridging.. hmm avoid if possible. For reliable connection no.. apple products can do wireless repeater but as you mentioned that turns off the ethernet ports except for the Express.. that is the only unit you can use as a bridge and plug a switch into it. Why Apple why??
So if you want to bridge two points by wireless buy specialised wireless bridge.. that means an AP in the house plugged into the existing network.. and AP unit perhaps on the outside of the garage.. or in windows if you have a window in the house that looks at a window in your office. Look at products from companies like ubiquiti.. they are not too expensive but professional equipment and designed for precisely this kind of work.
Hence the reliability is dramatically better than domestic stuff.. and will require a lot less work to maintain the link.
Conclusion.. wire it.
Unless you rent the house.. an investment in ethernet cabling install once properly and forget .. beats every other solution even if it costs x5 as other solutions.

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device. I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail. Thanks for your help.

Not a feature of iOS. Check the AppStore to see if there are other
mail apps that allow passcode protection.
Or use Safari to log onto your email via a web-based interface and
enter your credentials each time. A bit slower, but the kids will
not know the details to login.

HT4972 How do I setup my I-pad 2 to print with a wireless printer on my home network

Similar Messages

Maybe you are looking for