HT4972 How do I tell if my ipad was updated to ios6? It still says it's version 4.3.5

How do I tell if my ipad 2 was updated to ios6? It still says it's version 4.3.5

Then it hasn't been updated to iOS 6.0.1.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Similar Messages

  • How can I tell if my iPad 5 has A2DP?

    How can I tell if my iPad 5 has A2DP?

    http://support.apple.com/kb/HT3647
    There is no "iPad 5" as an official model designation. Did you mean an iPhone 5 as you list in your profile?
    Regards.

  • How can I tell if my iPad is about to overcharge?

    How can I tell if my Ipad is about to overcharge?  I can I avoid overcharging it? Thanks!

    There are no modern day consumer electronics that you can overcharge... they all have protection for this, i.e. they stop charging when full.  This may not be completely true for some really cheap Chinese knock-offs.

  • I have a dual band router. How can I tell if my iPad is using 2.4Ghz or 5Ghz.

    I have a dual band router. How can I tell if my iPad is using 2.4Ghz or 5Ghz. I want to try and manage all the devices in the house over our WLAN. Thanks. Nik

    I'm not really sure there is a way to tell, it certainly doesn't seem to be something you can set within the iPad so I'd assume that if a 5Ghz frequency is available it would use that, otherwise it would default to using a 2.4Ghz frequency instead.  I'd also assume from having a 5Ghz router myself that there would be some sort of light on your router which will flash on/off when data is recieved so if iPad is your only 5Ghz device and it's sending/receiving data then this light should flash on your router.
    Regards,
    Steve

  • How do I tell when my imac was manufactured?

    How can I tell when my imac was manufactured?

    Hey that's pretty trick Frank, it even knows when my iPads, iPods, etc. were built that have been synced This Mac.

  • HT4623 My iPad was updated by using my sons apple laptop. Now my iPad recognizes his email address and I'd instead of mine. How do I chane it?

    My iPad was updated to iOS 7.0.4 by using iTunes on my child's laptop. Now my iPad has there info instead of mine such as emails address and pswd? How do I change it to recognize my original info?

    Do you have a backup on another computer?
    You'll have to restore.
    Restoring iOS software
    http://support.apple.com/kb/ht1414http://support.apple.com/kb/ht1414
     Cheers, Tom

  • How can i tell if CellSpy pro was installed onto my iPhone S4?

    How can i tell if CellSpy pro was installed onto my iPhone S4 without my knowledge?

    Correct. Someone would need access to the phone and know your iTunes password to install an App. Do your mystery phone-calls seem to be the same as in the link below?
    http://www.callercenter.com/487-121-9722.html

  • There were no results for How can I tell if an iPhone was stollen and if it is, can I still activate it

    There were no results for How can I tell if an iPhone was stollen and if it is, can I still activate it

    Method #1... Call 800-MY-APPLE & have them check the serial number. If a previous owner called in to find out how to use find my iphone, chances are there'll be a case made of it

  • How can I tell when a product was first purchased

    How can I tell when a product was first purchased

    Apple - Support - Check Your Service and Support Coverage you will see the date when your warranty is about to expire, subtract the time it has been in warranty and you'll know the data of purchase.

  • How can I tell when my macpro was bought or made?

    How can I tell when my macpro was bought or made?

    Mac Pro (desktop) issues should be asked in its forum area.  This area is for Macbook Pro issues. 

  • How can I tell if a fax was successfully sent?

    Can someone tell me how I can tell if a fax was successfully sent?
    I'm using the built-in software. I used the print function of a .pdf file,
    and selected 'fax pdf'. The icon at the top showed 'connecting' and
    then 'sending', but I never saw 'sent'.
    Thanks,
    Paul
    Intel iMac   Mac OS X (10.4.7)   External modem

    I am not kidding. The best way I know of to determine if a fax is successfully sent is to ask the recipient about it.

  • How can I tell where an app was installed? I share my iTunes account with family And wanting to install an app and it shows I've  already installed if.

    How can I tell where an app was installed? I share my iTunes account with family And wanting to install an app and it shows I've  already installed it.

    If you are seeing "Installed" in the Purchased section of your iPhone, then it only means that the app is installed on your device. Is that where you are seeing the "Installed"?
    Cheers,
    GB

  • HT5012 My iPad was updated yesterday, but the time is wrong on the wallpaper, how do I change it?

    My iPad was updated, but the time on the screen is wrong. How do I correct it?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • HT4097 My iPad mini says it requires version 10.7. I have 10. 6. 3 - When I try to update to 10.7. it says a newer version is already installed.

    My iPad mini says it requires version 10.7. I have 10. 6. 3 - When I try to update to 10.7. it says a newer version is already installed.  How do I get my I tunes to accept my IPad mini?

    Are you using a Mac computer...?
    If so... On the Mac...
    Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?

  • Capacity maxed out on ipad after updating to iOS6

    capacity maxed out as "Other" on ipad after updating to iOS6.  How do I fix?

    You can try this, but it appears as though the download went bad and you might very well have to restore your iPad to get rid of the "Other",
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    "Other" consist of non media content .... App documents and files, contacts, calendar entries, Safari bookmarks and history, notes, email messages and so on. It should not be bloating your iPad storage.

Maybe you are looking for

  • HP Laserjet p3015 Major Issue

    I recently purchased a brand new Laserjet p3015 printer to run our service dept. work order printing. The problem I am having is that the print test page comes out fine, and so will the first actual print from the printer, as long as it is only one p

  • CREATIVE ZEN, HOW TO CHARGE THE BATTERY.

    <DIV align=center>Hello, Just got a Zen Micro and just installed it and all that and then when i was messing about with it the battery went so when i went to charge it i plugged the USB in the back of my computer and plugged it into my Zen, It did wo

  • Flash Animation - How

    Can someone direct me to the best way to include flash animation to iWeb? Are there web sites I could visit or research? Thanks.....MacP

  • Bug? SQL server 7 - Oracle 8i stored procedures

    I'm having a problem converting some SQL 7 stored procedures to Oracle using MW. The cursor definition appears to be garbage in some cases. See example as follows: *********** SQL 7 stored procedure ********* CREATE PROCEDURE CLCClaim /* Procedure: C

  • Same Group UUID On Two Systems?

    I sync files between an iMac and a MacBook both running 10.5.4. The source files are accessible by group "abc" on the iMac. The same group "abc" is defined on the MacBook. When these files are copied to the MacBook the group "abc" is shown as "Unknow