HT4972 i can not able to update ios 4.2.1 to 5
I am not able to update ios 4.2.1 to later in my iphone
kindly help this issue.
You can't. That is end of line for your iPhone.
For higher iOS need to upgrade iPhone to atleast 3GS.
Similar Messages
-
I can not put the updated IOS 7 because my ipod says my ipod is already updated, but it is not.
WHAT GENERATION IS YOUR IPOD? IF IT IS THE FOURTH GENERATION U WONT BE ABLE TO BECAUSE IOS7 IS ONLY AVAILABLE FOR IPOD TOUCH 5TH GENERATION.
-
i am not able to update ios 5 to my iphone4, i am getting the error code 3259. i have trouble shooted my computer, but again i am getting the same problem. i tried more than 5 times
Try updating via iTunes.
-
Not able to update IOS 5 on 3gs baseband 06.15.00
i want to upgrade to IOS 5 but not able to do so with baseband 06.15.00.
You're phone is jailbroken? You're on your own. Jailbroken devices can't be discussed here.
By the way, this is one of the potential problems caused by jailbreaking. -
Not able to update IOS 4.3.2
Failed to update IOS 4.3.2. Had changed Itunes Media Folder location. Ipad update software was downloaded but it just dissapear without updating to ipad. Please help advise further. Thank you.
Hi Johnathan!
I selected ''download & update''. Then it prompted to next page to agree on Terms.
When I plug Ipad to PC, again its ask to download the software. But the software takes times to download ~ 2 hrs I think. About 592MB
I've found the software save in 'Ipad Software update' Could I make use from this?
Thank you for your reply.
Cathleen -
Hi ,
When I tried to update the IOS to 6.0.1 from current 6 verion on my iphone through itunes libray got a error mesage.Now i am able to see only cable symbol and itunes symbol on my iphone 4.You may have to do this a few times http://support.apple.com/kb/HT1808
-
HT4972 I can not find software update on my iphone
When i open the settings on my iphone 4 there is no software update tab. What is the problem? Can anyone help me rhis
That's because it's only present if you're already running iOS 5 or higher.
Try reading the entire article. Especially the section on updating using iTunes. -
HT4972 I can not find software update on my iPhone 4
Hi I can't find software on my Iphone 4? How can I update my mobile
The device must be running iOS 5 or later to have the option.
If it is running iOS4, upgrade via iTunes on the computer. -
Cannot update Iphone 5s to ios 8.0.1 , it is showing no internet connectivity error.???????????????
Alright.............
On i tired updating on Iphone 4s..... it got easily updated... -
HT4972 I can not find the update "button" to update my i phone to ios6?
Where do I find the button to update my iphone to i0s6?
This is ONLY a feature of ios 5 or above.
Since you have ios 4, you will need to update as always and as the article you linked from expalins:
Turn on computer, open itunes, connect iphone.
That's it. If there is an update available it will prompt you.
Make sure you have the latest itunes version. -
I have an ipad2 that has ios4.3.5 that I'm trying to update to iOS 6. I'm not able to update because of unidentifiable apps. I'm assuming that these are apps I tried to get but couldn't open because I needed iOS 5 or higher. These apps are still in my app store always needing updates, but I can't open or update because I don't have iOS 5. I can't delete them either because they can't be opened or aren't on my screen to hold/let wiggle/X. I need to remove these apps, but can't figure out how. Please someone tell me how
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you are updating using wifi, locate your iPad close to your router so you don't get a wifi dropout (can cause update corruption).
Cheers, Tom -
I have ipod touch MC086HN, i'm still on ios 4.2.1. I am not able to update my ios. Can somebody help?
If you are using IOS 4, you need to connect to iTune (computer) to update software.
Update to IOS 5 or higher
http://support.apple.com/kb/HT4972 -
I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?
Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling -
I am not able to update my apps because every time I am doing this, it is asking for a password which I have never used and the person who used it is in no more contact. how can i get my id instead of his??
Apps can only be updated using the same Apple ID and password they were originally purchased with.
-
Hi I m not able to update my iPad 2 to iOS 5. I am using windows OS, when I Connect my IPad to laptop, I tunes detects and ask for updating to iOS 5. But after some time it shows a error message saying network connection timed out and try after some time. This error message occurs every time I update. Please help me to update my iPad 2
ThanksClose your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US
Maybe you are looking for
-
How do I suppress scrolling of a ScrollPane via MouseWheel ?
Hi all! I'm trying to suppress the scrolling via MouseWheel if the user has pressed the control key at time of scrolling, but I'm not able to do it. It doesn't matter at which node I add the ScrollEvent handler. The problem is, the ScrollEvent handle
-
Spin transitions and ripple dissolve are not rendering?
Hi, Most of my transitions are rendering normally in final cut pro 7, the strange thing is there are a few that don't work!!!! If I add a spin transition or ripple dissolve I can see them working fine when I scrub across the timeline, when I do a ren
-
Lookup a MySQL Datasource with a EntityBean EJB with jboss
Hy all, For a few days, i have problems to instance a datasource from my Entitybean EJB jboss release is 3.2.2 , MySQL 3.23.38 i use mysql-connector-java-3.0.9-stable-bin.jar for jdbc connectivity Here is the source of my datasource mysql-ds.xml <dat
-
I would like to send some of my images to a stock library but they require a 48 MB JPEG. Is it possible to export a file of this size from Aperture? Or do I need a third party plug-in!
-
Cannot save changes to files on raid
Background - G5 xServe, xRAID - 6 Folders shared out to mixed environment, OS X, XP Pro and Vista. I am in the Administrators group and have full access to all folders on RAID. Admin group has four members 3 on Vista 1 XP. I can open and change/delet