HT4972 I have an Ipad still running on version 4.3.3 i have erased all its content and tried updating to the current update and it goes through the whole motions and at the very end an error message comes up saying the ipad was not able to update. What ca
Can someone help me updating my ipad? is still running on version 4.3.3, i have deleted all its content I have restore to original settings and still cant update.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom
Similar Messages
-
i purchased an album and all of it downloaded except for one song. after a few auto attempts an error message comes up saying the file is corrupted. how do i get the song i paid for?
oh the error msg error= -100000I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions
When trying to purchase an app an error message comes up saying the info I entered does not match my banking info. The odd thing is, the $1.00 hold is shown immediately on my credit card acct. , so I obviously did enter it correctly. Tried 5 times. Any suggestions
-
I've been getting an error message lately which states the following:
Web Sync could not initialize properly. Check that Polar Daemon is running and start Web Sync again. To restart Polar Daemon you need to run 2 commands in Terminal Start Applications>Utilities>Terminal. To stop Polar Daemon which is already running, write a command”sudo launchctl unload/library/launch daemon/fi.polar.polard.plist.” and press enter. Enter your password when required. If Polar Daemon is not running, “error unloading” message appears. Ignore this error message. Write “sudo launchclt load/library/launch daemons/fi.polar.polard. plist” and press enter to run Polar Daemon.
Is this something I should be concerned about, and if so, what do I do about it?
ThanksThat error message comes from third-party software that you installed. If it isn't working, either remove it according to the developer's instructions, reinstall it, or refer to the developer for support. Back up all data before making any changes.
-
While trying to access my library in iTunes, I receive an error message; The requested URL was not found on this server. This only happens with my older songs, but not with the ones I have most recently added? Any thoughts?
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
-
Since I have a new computer , I had to download my itunes to the new computer. Now I cannor listen to anything in my library. I get the message;: the song...could not be used becaue the original file could not be found. Would you like to locate it? Then gives me the option to loaacat it or cancel: Why is this happening??
you have to file the music file if you dont itunes cant play a file that does not exist. check the get info and look for the old music file on your old computer. Or do this http://support.apple.com/kb/ht4527.
-
Please answer my question quickly!!!
Hey radyslav,
There's an article that applies to your situation, I'd follow the steps within here:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Take care,
Delgadoh -
I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
AnthonyLao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands. -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
Hi friends.
Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.Just download Mavericks (10.9) its free and installed it (Mac App Store)
-
My iPad mini says to connect to iTunes, and I try to restore it, but after its done extracting a message comes up saying that device is not found, is there anyway i can fix this? I don't care if i don't get my stuff back, i just want my iPad restored to its starting settings.
If everything else that you try fails, I would try using another computer. Since you don't care about saving any data, any computer that is running the latest version of iTunes might be able to restore the iPad. You could make an appointment at an Apple Store Genius Bar and they can do it for you.
If that isn't feasible for you, try using a different cable, a different USB port. reboot the computer, and reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Then try again. -
BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition
Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others. -
when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.
Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma -
I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Every time I try to sync my I phone to I tunes an error message comes up saying I do not have enough access to sync. How do I gain the access
While your iPhone is synching in iTunes, do the following:
1. Click on your iPhone's icon on the left.
2. Find and click on the "Tones" tab on the upper right of the iTunes display.
3. Choose the synch option you would like.
Maybe you are looking for
-
How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients" from the list? I have seen this screen but cannot find it again. It shows all of the "Previous Recipients" in a long list. You can edit the list by selecting
-
Arch Linux Magazine, March 2010
Come take a walk down memory lane... http://www.archlinux.org/static/magazine
-
Financial transaction and commitment item category
Hello, Can any one suggest what financial transaction and commitment item category can be used when creating the following commitment items: u2022 Value added tax (VAT) u2022 tax on profits u2022 before-tax income u2022 nett income u2
-
My iSight is sometimes working and sometimes not working. I have done everything from uninstalling software to resetting the PRAM to doing a hardware check. There are two problems if it does work: 1. It is a funny purple color. 2. It only works in th
-
Iam trying to edit a psd of a logo for a company iam working for, http://www.travideos.com, but when i open it says something like "can not open, file might be corrupted" the psd is done in CS4 and iam trying to open it in CS6, what can it be? what c