HT4972 i have an ipad version 5.1.1 and my ibooks no longer works. please help there are pdf docs i would like to read
I have an ipad, version 5.1.1 and ibooks no longer works, i have followed advice re restarting etc but no joy. is there a way i can send the contents somewhere and retieve them especially pdf's? i have synced with itunes and they are not accessible with my laptop. any advice would be gratefully recieved.
The latest version of iBooks in the App Store will not work with iOS 5.1.1.
However, you can download a compatible version of iBooks onto your iPad as shown here:
http://support.apple.com/kb/HT5919
Similar Messages
-
I have an ipad version 3.2.2 and it does not have a software update tab under settings, how can I update to ios 5 software?
Connect it to your syncing PC and update using iTunes on the PC. The OTA (over the air & under Settings>General>Software Update) update was introduced with iOS 5.
http://support.apple.com/kb/ht4623 (scroll down to "Update your device using iTunes" about 1/2 way down the page) -
HT4972 I upgraded my iPad to IOS 5.1 and now Safari doesn't work.
I upgraded my iPad to IOS 5.1 and now Safari doesn't work and keeps bombing out. I've tried restoring the iPad to the original configuration but this is clearly not restoring the iPad back to the original factory default!! Help !! I have the original v1 iPad. I wish I had never upgraded the IOS now !
1. Double-click the Home button to show the Task Bar
2. Hold the Safari icon down for a second or two until you see the minus sign
3. Tap the minus sign to close Safari
http://i1224.photobucket.com/albums/ee374/Diavonex/4fb09fd6.jpg -
i hooked up my iphone 5 c to my computer to download my photos onto my computer and instead it downloaded all pictures on my computer to my phone and ipad in the photo gallery and now I cannot delete them. please help
Sounds like you synced the photos instead of importing the photos.
In iTunes with your device plugged in, go to the photos tab and uncheck the photos that were synced over, then sync again. This should take the photos from your coputer off the devices leaving just the camera roll.
If you have a Windows computer, go to mycomputer and right click on your device and select import pictures and video. If its a Mac computer, plug in your device and go to iphoto and select import all. -
i am wondering if anyone can tell me how to go about getting a refund on my account with itunes for apps i have been billed twice for. this has happened befor and u used to be able to gointo purchases and report a problem and they would take care of it. now we have to go thru all these bells and whistles to just get a minor problem fixed.....how frustrating is that !!!!!!!!!
Welcome to the Apple Community.
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you. -
I have the new 5s and my fingerprints don't work - please help.
Hi - I have entered different fingers for my fingerprint and they don't work - what is up with this - thank you for your help
I thought this phone was suppose to make your life easier. thanksPeggy206
1. Try to delete and then re-add the fingerprint. Things to consider is make sure your finger is dry from any liquid or moisture. Also try to clean off the touch id sensor with a soft cloth and rescan your fingerprint.
2. Try to reset your settings and then go to settings-general-touch id and passcode and re-add your finger print. When you add the fingerprint make sure that you don't move it around too much until the first part of scanning your fingerprint is done. Then in the second part of the scan is where you wanna move the finger around.
Hope this help! I have my iPhone 5S and it does help when the fingerprint sensor is working. -
HT4972 I have an ipad with 4.10.01 and itunes does not show a software update?
I have an ipad2 with 4.1 firmware.
I cannot update it as my itunes on my mac recognize my ipad as a device to sync to.
What else can I try?
Thanks for any help!My guess is you have a very old version of iTunes on your Mac.
Go to http://www.apple.com/itunes on your mac to download a more recent copy.
Depending on how old your Mac is and how old its OS X is, you may not get too current an iTunes version. The latest is 11.0.4. -
''locking as a duplicate - https://support.mozilla.com/en-US/questions/876430''
I have thousands of favorites and Firefox is my web-browser of choice. Sadly I'm backed up on what bookmarks I have stored and if the websites are still active or not.
I cannot load more than 15 bookmarks it seems at once as my PC is trying to load all the web content for each page in the new tabs.
This is my PC specs:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name xxxxxxxx
System Manufacturer System manufacturer
System Model System Product Name
System Type X86-based PC
Processor x86 Family 15 Model 75 Stepping 2 AuthenticAMD ~2210 Mhz
Processor x86 Family 15 Model 75 Stepping 2 AuthenticAMD ~2209 Mhz
BIOS Version/Date American Megatrends Inc. 0301, 21/08/2006
SMBIOS Version 2.3
Windows Directory D:\WINDOWS
System Directory D:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
User Name xxxxxxxx/ADMIN
Time Zone Atlantic Daylight Time
Total Physical Memory 2,048.00 MB
Available Physical Memory 1.53 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 3.85 GB
Page File D:\pagefile.sys
I have High Speed internet connection with the provider Rogers.
Dlspeed is 12.9 Mbps
Upspeed is514 kbps
My PC supports Windows 7 OS which I have as a multiboot alternative when my PC starts up.
I have continually waited and it says Firefox is not responding and I may be able to see the multiple tabs opened in my browser but cannot navigate or access them.
I have read on various sites that users have had as many as 1500 bookmarks load at once in tabs in the Firefox browser version that are outdated.
I have not been successful with just loading 50 bookmarks my goal is to be able to have 500 tabs loaded in firefox with webpage loading stopped on all of them. I will choose reload for about 10 tabs at a time to view webpage content and then close and move on to the rest.
My ultimate goal is to clear up the Thousands of bookmarks I have piling on for the past 6 years and some are duplicates or similar page sites.
Their is no Firefox 3rd party addons that I could locate that would allow this. Only to restrict the number of tabs loaded by giving warning messages when limit is reached.
Please assist me as it will greatly help me with finally deleting and re-organizing my Favorite and frequent websites in my Browser of choice Firefox.
The email is generic for privacy but it is valid please respond with methods on how I can achieve my request or suggestions on how I can modify my browser or PC settings to allow this. Thanks Firefox Administration Team.
I edited with a recent Workaround added to Troubleshoot section.
If there is a keyboard shortcut or easier way to do this would someone please let me know?Firebug is notorious for causing problems like you described.
Disable it when you don't need it or install it in a 2nd Profile. Then you can launch the 2nd Profile separately to use Firebug and not affect what you are doing in the 1st Profile, -
Can anyone help me please?
You probably have other things on the iPad that are taking up a lot of space.
What you'll want to do is connect the iPad to your computer and select it on the sidebar in iTunes. It will show you a bar along the bottom that tells you what is taking up space.
TV shows can fill up the space pretty quickly, but you should be good with even a 16GB iPad 2 if you can see what might be taking up the space.
Post here what the bar says and we might be able to figure it out if it isn't something you figure out with that information.
As an example, let's say that it says Photos is taking up 15GB, then you would go to the Photos tab and disable syncing of them altogether, or limit what it syncs. The same would be the case for any of the other stuff that takes up space. -
On my Ipod Touch 4G, the camers shuter is stuck closed. I have reset it, restored it, turned it off/on, nothing has worked. Operating system is up to date. This has been an issue for a while, but it normally fixes itself.
Try here:
iPod touch: Hardware troubleshooting
Also try placing the iPod in recovery mode and then try to restore via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.
Hi
Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
On the other had ipad is connecting to other iPhone but only not mine.
Still showing ipad not supported message. And also shows not paired.
Please help. -
I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?
Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?
You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums. -
Hello, I have ipad version 1 (3yrs old) and I am still running on i.os.5.1.1.
How can I update to new software as I am unable to run some apps.
Itunes is up to date and I have synced but when I click on software is says my software is up to date but mu iphone is running on a newer version?
Any advice or help would be appreciated.vickyk132 wrote:
Hello, I have ipad version 1 (3yrs old) and I am still running on i.os.5.1.1.
iOS 5.1.1 is as far as the iPad 1 will go. -
I am a new user. I have created iPad versions of videos, but I can't get them to synch from my iMac to my IPad. I have consulted the Help section, but the videos do not appear in the iTunes library as movies.
Pad2, the new iPad Supported Video Formats & Movie Formats
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
You can use a USB flash drive & the camera connection kit to import the videos.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom
Maybe you are looking for
-
Just Installed Firefox 6.0.2 And I'm Having Many Problems On Some Web Sites When Using Firefox:
-When I click on a picture on some sites it will go to the next page with a large view of the picture and then when I go back one page to do the same with another picture (or even the same picture) nothing happens. -Videos don't show up or on some si
-
Album recognized by Gracenote on one user account, but not another
When I am logged in to my computer as Administrator, iTunes recognizes my CDs via Gracenote with no problem. When I am logged in as "All Users," however, Gracenote is unable to retrieve albums and track names. iTunes under both user accounts is 8.0.2
-
Newbie ? how to set headless=true
Hi. I'm new to the awt and administration of java. I've read serveral postings telling me to set headless state by doing the -Djava.awt.headless=true but I'm not sure where to put that statement. I don't have a catalina.sh file. I'm not sure what to
-
Source system initialization error in ERPI using EBS,
Hi, I am trying to initialize source system details in ERP Integrator(workspacce) using EBS detials,for loading to Planning. Add source system is success,then click on Initialize button I got this error: Error encountered while launching the ODI Proc
-
Previously saved recordings not playing after sche...
I'm on the new BT Vision system. Received an automated call this week advising of a forthcoming scheduled system upgrade. The upgrade took place tonight and went ok. However, when I now go to my Recordings, all of which were saved prior to the upgr