HT4972 i have an ipad2 but i have no ios at all and there is nothing in my settings when i plug it into my computer, How do i get ios

how do get ios on my ipad2 please?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Similar Messages

  • Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

    Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS1591

  • My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

    My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • I have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in

    i have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    iOS: Wrong passcode results in red disabled screen
    This will tell you how to restore
    iTunes: Backing up, updating or restoring iOS software
    If you cannot restore that way, you may have to use recovery mode
    iPad: Unable to update or restore

  • I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos?

    I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos? I have read other questions that say to plug the iPod into the computer and like un-sync it, but I downloaded the new iTunes and it doesnt have a photos tab. Does anyone know how to solve my problem? Please and Thank You, Megan!

    Just what did you do to the computer?
    It sounds like the iPodf is seening the iTunes libary as a new libary.

  • I have an Ipod 4th gen. and when you plug it into the wall it is stuck on the charge/lighting bolt screen and it wont charge, and when you plug it into a computer (PC) the lighting screen wont even apear. Please help I have had this problem for forever.

    I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever

    Hi Gammer576775!
    Here is an article that will help you troubleshoot this issue with your iPod touch:
    iPod touch: Hardware troubleshooting
    http://support.apple.com/kb/ts2771
    Will not power on, or will not turn on unless connected to power
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if the display turns on and…
    The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
    The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
    If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
    Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
    If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • When i first got my iphone i plugged it into my friend's computer and songs on from itunes. Now it will not show up in the side bar when i plug it into my computer. I have already tried 'authorizing this computer'. What can i do?

    When I first got my iphone i plugged it into my friends computer and added songs from their itunes. Now when i plug it into my computer it will not connect or show up in the sidebar in itunes. I have already tried factory resetting the phone and 'authorizing this computer' in itunes. Can anyone help?

    Is your iTunes up to date, it is now 10.7, click the iTunes button at the top of this page if you need the new version.

  • After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle?  When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete.  WRA

    After I've heard an audiobook downloaded from the public library, how do I delete it from the Shuffle to make room for other audiobooks?  When I plug it into my computer, I get a screen showing how much space is left on the Shuffle but no list of files that I can delete.  These books, incidentally do not appear in the ITunes screen.  WRA

    Select the iPod shuffle in the iTunes sidebar (under DEVICES).  If this is a current 4th (or 3rd) gen iPod shuffle, you should be able to see the contents of the shuffle by type, intented under the shuffle's name (still in the sidebar).  Select Music or Audiobooks (not sure where those items from the library will be listed).  The items will be listed to the right, for each category.  Find the items, select, and delete.
    It's on page 20 of the manual
    http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
    NOTE:  If this is an 1st or 2nd gen iPod shuffle, select the iPod shuffle in the iTunes sidebar (under DEVICES).  Over to the right, go to the Contents tab, where the items are listed.  Select and delete them from this list.
    I find it more convenient to make a playlist in iTunes with things I want to put on the shuffle.  I then set up automatic syncing (or use autofill) to have iTunes load the shuffle from that playlist, automatically.

  • My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does no

    My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?

    If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
    Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
    An Internet connection will be required (wired or wireless).
    At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

  • My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

    My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it. 

    Hello Korawees,
    I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
    Before Starting
    It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
    Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
    How to restore iPod shuffle
    Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
    Download and install the latest version of iTunes if you do not already have it installed.
    Open iTunes, and then connect iPod shuffle to your computer.
    After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
    Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
    The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
    Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
    Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
    Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
    If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
    A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
    After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
    When you come to step 7, I recommend Restore Option 4.
    Take care,
    Sterling

  • Why is my iPod named something, but when I plug it into my computer, it says it is a different name?

    I have my iPod Touch named "Holden" and when I plug it into my computer, a screen pops up saying "Blake Jones's iPod".
    However, in iTunes it says "Holden".
    A few days ago, I did plug my friends iPod (named "Blake Jones's iPod) into my computer. How do I make it to say "Holden's iPod" on the screen that pops up right after I plug it in?

    Start here:
    iOS: Device not recognized in iTunes for Windows
    If it is the "new" 16 GB 4G iPod you need iTunes version 10.7 on the computer.

  • What is wrong with my 30" Cinema Display?  The USB and FireWire ports still work, but the screen is pitch black. When you plug it into the computer, it detects that it's a Cinema Display.

    When you plug it into the computer, it detects that it's a Cinema HD but the screen is pitch black.
    For some reason, the USB and FireWire ports still work.

    If you shine a really bright light directly into the screen can you then see a faint image on the screen? If so, that would indicate the backlight has died (hardware failure) and the unit needs repairing.

  • My computer wont recognize my iphone 4. when i plug it into any computer it doesnt charge. i followed the procedure on the website but the device manager still says unknown device. any ideas how to fix this???

    My computer wont recognize my iphone 4. when i plug it into any computer it doesnt charge. i followed the procedure on the website but the device manager still says unknown device. any ideas how to fix this??? the weird thing is it use to work until yesterday. thanks

    Will it charge when connected to a wall outlet? The USB port on your computer must be 2.0
    Powering Apple and third party peripherals through USB

  • My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • All it shows is to plug into itunes but when i plug it into my computer it doesnt show up?

    i was able to restore it but now all it shows is to plug into itunes but when i plug it into my computer it doesnt show up? and it doesnt come up under my computer as a hard drive either.

    Try again to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    If still not recognized in iTunes, try the tips mentioned in this article:
    iOS: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Selective data transfer to new MacBook Pro?

    Hello, I have a iMac at home and just purchased a MacBook Pro.  I want to just selectively transfer things such as some of the photos from iPhoto and some of the music from iTunes but I want to keep the MacBook "cleaner" than the iMac is, what is the

  • Can't edit include file in the enhancement.

    Hello expert:          I want to do enhancement for datasource, after I click into include file ZXRSAU01, I click chang button, the whole include file turn to white, I was not allowed to edit in the include file. please tell me how to resolve it? Man

  • Dashboard of the Recruitment process

    Hi all, could you help me to understand how I can set the filter in the Dashboard  page? If I enter, for example, in New external Candidates, I don't see the filter button? thanls a lot Rosy

  • Need camera Raw 5.5 for 32 bit windows

    I have bought a new Nikon D3000 camera and i'm not able to work on my raw photos because I don't have the latest update from camera raw. I tried to download the 64 bit, but that didn't work. I have a 32 bit system and I can't find it on the net....th

  • Fonts Acting Up after Update

    I updated to 10.6.1 after getting home today from work. Everything seemed fine until my fonts started acting up in Safari. Random things were italicizing. I already cleaned Font Book, removed duplicates, booted in safe mode and cleaned out the caches