HT4972 I have the 3rd generation ipod touch and it is saying that version 4.2.1 is the current version and there is no mention of ios5

Apple says ios 5 works with the 3rd generation ipod but the highest os i have is 4.2.1?!?!?! help!

If 4.2.1 is the latest version, then you have a 2nd gen iPod, not 3rd.

Similar Messages

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • I have a 3rd Generation Ipod touch and it is updated to the 5.0.0 OS. However I just got another 3rd generation 32gb IPod Touch--it is exactly the same, but it will not update on any computer I have authorized. I have tried restoring it HELP!!

    The Icloud on the newer i pod will not activate and itunes will not let me download my icloud songs on itunes that i bought on my other ipod how do I update the new ipod and add icloud so i can put my music on it???

    What happens when you try to update/restore Erro message?
    Is is a 2G iPod? They look the same.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Have a 3rd generation ipod touch and the touch screen will not work.

    What should I do?  My iPhone sometimes does this and there is a key on the side that I always hit and it makes it work again but my ipod doesn't have that.  What to do what to do what to do

    Try the standard fixes:
    - Reet. Nothing is lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/nw iPod.
    If you still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT4972 I have a 2nd generation ipod touch and I cannot figure out how to get ios 4.2.1

    I can'tdownload games or pandora without upgrading and I cannot figure it out

    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • 3rd Generation ipod touch and instagram

    I have a 3rd generation ipod touch and I was wondering how do I go about adding pictures to instagram since it doesn't have a camera. Is there a good camera app I can download?

    You have to import the photos such as by syncing them from your computer or saving them from an email attachment. Import from DropBox may also work.
    I really do not understand  what you  mean by a camera app sine the 3G does not have a camera.

  • We have some 3rd generations iPod touches that are note syncing with the computer we have. The original computer that the ipods was synced to is gone. We downloaded the itunes to the new computer and logged on as the same account and it won't sync.

    We have some 3rd generations iPod touches that are note syncing with the computer we have. The original computer that the ipods was synced to is gone. We downloaded the itunes to the new computer and logged on as the same account and it won't sync the applications we have.

    An iPod can pn;y sync wiht one iTunes kibrary and the new computer is a new iTunes library:
    - Transfer iTunes purchases to the computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party probgram like one of those dicussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    - Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup

  • HT1353 I just purchased a 3rd generation Ipod Touch and the latest software is iOS 4.2.1 and I'd like to download some Apps (facebook, words with friends, etc.), but they all need iOS 5. Help!

    I just purchased a used 3rd generation Ipod Touch and the latest software is iOS 4.2.1 and I have been trying to download apps (Facebook, Words w/Friends, etc.), but they all say I need to have iOS 5. Help!

    Here are some tools to search for compatible apps (The first one is my recommendation).
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.
    I personally havent looked for any clones of Words With Friends, but I bet you can find something.
    Here are a couple apps which say they are compatible with Facebook:
    Chatnow for Facebook
    Friends Planet 2
    Quickly for Facebook with Video Chat

  • I have a 3rd gen iPod touch and I downloaded the most recent itunes, ever since I did, only the first song syncs to the ipod. As soon as it gets to the second, it xtill says its syncing. However, nothing happens. How do I fix this?

    I have a 3rd gen iPod touch and I downloaded the most recent itunes, ever since I did, only the first song syncs to the ipod. As soon as it gets to the second, it still says its syncing. However, nothing happens. How do I fix this? I have restored and updated the ipod. I have the new iTunes. I have restarted my computer checked the connection and everything.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • I have a 3rd gen ipod touch and i want to update to 4.3.3 and it says error when done downloading and i have the new itunes?

    i have a 3rd gen ipod touch and i want to update to 4.3.3 and it says error when done downloading and i have the new itunes?

    it says we could not complete your itunes store request an uknown error occurred (-9808)
    there was an errorin the itunes store. please try again later. I plug in my ipod to update it and it says that?

  • Ok i just bought a used 2nd or 3rd generation ipod touch and it has a password i dont know what to do

    Ok i just bought a used 2nd or 3rd generation ipod touch and it has a password i dont know what to do

    The blue Recovery mode here and in my first reply is a link that provides the instructions for recovery mode.

  • I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?

    I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • HT4972 I have a 2nd generation IPOD TOUCH

    I have a 2nd generation IPOD TOUCH How can I upgrade the software so I can use newer apps

    After so many years, all technology becomes obsolete. For mobile devices this cycle is even quicker. That iPod is now 5 years old and there have been many hardware advancements since then.

  • HT4972 I have a second generation ipod touch how do I set you IOS. 5?

    I have a second generation ipod touch how do I set you IOS. 5?
    help me is something I have tried a long time ago please send your answers as quickly as possible

    If you are using iTunes on Maverick OSX 10.9 then syncing of contacts and calendars has been removed. The replacement is to use iCloud instead.

  • I have a 2nd generation ipod touch and it wont let me download apps onto it is thir anything i can do

    When i am trying to download it says that i dont have the upto date software but when i click on the update button is says i am upto date ?
    Does anyone know if this can be fixed or if it is due to the model being old

    If you are running iOS 3.1.3, it is very likely you have a 1st generation iPod touch. That is the highest iOS version it can handle.
    Regardless, you can find plenty of apps in the iTunes store which run on older devices. Here is my favorite solution for filtering compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    And here are some things other people have suggested:
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

    I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

    Hi ChristianHelpplz,
    Thanks for visiting Apple Support Communities.
    It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
    I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
    Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable.
    Restart your device
    Restart your iOS device or reset your iPod.
    Restart your Mac
    Turn your Mac off and back on.
    Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software.
    From:
    If you don't see your connected device in iTunes for Mac - Apple Support
    If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    Jeremy

Maybe you are looking for

  • Can you share FP Controls between different Event Structures

    I'm creating a program that will either read real-time data from an VNA on the GPIB bus, or read a saved s2p (Agilent) file and analyze it. The FP consists of 5 graphs, and various controls which handle events like printing, changing filters, or exit

  • I am trying to evaluate Labview 6.1. do not have extcode.h

    I am trying to evaluate Labview 6.1. A big portion of our project involves calling DLL's from Labview. I was attempting to follow the step described in "Using external code in Labview", Chapter 2 Build a Library Project in an External IDE (Windows pl

  • Pass one parameter from parent to child report.

    Hello experts, I am new in OBIEE. I have devloped report1 and report2. Report1 is master report and report2 is child report. Both reports are madeup of combined request to need to business requirement. I am facing issue to create navigation from repo

  • Connecting Youview box to DVD and TV. Now ordinary...

    Hi, Does anyone know how to connect a TV, BT Youview box and a DVD recorder together.  I have two SCART, one RF and one Aerial connection together but now we cannot watch our ordinary TV.  I need this for my son.  It is probably a simple connection e

  • Data Warehouse errors, SQL Server Agent Stopped

    I just installed SCE 2010 on a 2k8 server and went through the config wizard.  Now it is showing Data Warehouse alerts, including: Data Warehouse failed to discover object health state standard data set. Failed to enumerate (discover) Data Warehouse