HT4972 i need help upgrading from ios 3.1.3 to higher

someone gave me an ipod touch the ios version on it is 3.1.3 how do i upgrade it???

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)       
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1  Requires iTunes version 10.5 or later
A 4G to 6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models
The 1G does not have any buttons on the left side.

Similar Messages

  • HT4972 how do i upgrade from ios 5 to 6

    Hello,
    i want to upgrade from ios 5.1.1 to 6 as I don't like the look of 7

    If you are useing a Ipad 3 yes you can!!! BUT YOU HAVE TO DO IT THROUGH ITUNES FIRST!!!  I have done this for a few people in the last couple of weeks!!! Between Ipads and Iphones None of these people ever connected to Iunes on their systems I O S devices that could be upgraded had to be done through Itunes before Devices that that I O S 6 had the option of updateing trough the device.   LOL   (Ipad 1 can only go up to IOS5.1.1)   So hope you all understand my RAMBLINGS USE ITUNES and if possible you will be able!!!  PS Once your system is upgraded to IOS 6 You can update to what ever is possible through the device!

  • Need help upgrading from iPhoto 2... keep photo comments?

    I currently have iPhoto 2 that originally came with my eMac. I have recently upgraded the operating system to the 10.4.11. I have tons of photos in iPhoto 2. Ultimately, this has slowed down the response time when working in iPhoto.
    I am trying to figure out how the comments that I write for each photo stays with the photo after I back it up to my external hard drive, iBook? Or, how can I keep the comments to the photo when I email the photos?
    After doing some research, it looks like I need to upgrade to a current iPhoto to be able to do this. Is this correct? Will a current iPhoto version keep the comments with that photo when saved or sent elsewhere? What is the best way to upgrade and how do I go about doing this?
    Is there anyway to backup the photos on disc with the comments included? Or, can the comments be printed out to a thumbnail size of each photo for record keeping?
    I hope you can HELP with this "photo comments" dilemma... Thanks.

    Did you try repairing permissions yet? Just because you have a fresh install of Mac OS X doesn't mean everything is as it should be. And you may not know that the mail format changed from 10.4 to 10.5, so you should try rebuilding your Mail index like this:
    1. Quit Mail if it's running.
    2. Go to ~/Library/Mail and delete the Envelope Index file(s).
    3. Restart Mail, wait for it to import your existing messages, then check to see if you have access to your older mail from 10.4.
    Mulder

  • Need help upgradeing from DW 3

    I just upgraded from DW 3 to CS3 and I need to convert my
    site definition files which are DWS files in DW 3 to the STE files
    that CS3 uses. I used MM-exporter to save the data from DW 3.Can
    anyone help me get this done?

    How many sites? I think you will have to just recreate the
    definitions.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "carcubed" <[email protected]> wrote in
    message
    news:fhi4g4$oma$[email protected]..
    >I just upgraded from DW 3 to CS3 and I need to convert my
    site definition
    >files
    > which are DWS files in DW 3 to the STE files that CS3
    uses. I used
    > MM-exporter
    > to save the data from DW 3.Can anyone help me get this
    done?
    >

  • Need help upgrading from Lion 10.6.8 to Lion 10.7.2.

    I want to upgrade from Lion 10.6.8 to Lion 10.7.2 in order to use iCloud that is on my other devices.  The software updater on my Mac says there are no updates available.  What to do to get the latest OS?

    10.6.8 is Snow Leopard, not Lion. Lion is 10.7.x. Select About This Mac from the Apple menu. The installed version will be shown in the display window.
    If you are running 10.7 or 10.7.1 you can download the OS X Lion Update 10.7.2 Client Combo.

  • Need help upgrading from Mail 2.1.3 to 3.5

    I just upgraded from 10.4 to 10.5. I bought a new disk to install 10.5 on and have the old disk with 10.4 in a USB enclosure. I do not want to use the migration assistant because I'm trying to start with a completely fresh system (first time since 10.0).
    I thought importing my mail would be as simple as copying ~/Library/Mail (which is about 3GB) and ~/Library/Preferences/com.apple.mail.plist but it doesn't seem to want to work.
    After copying, I start up mail and it asks me if I want to upgrade my mail database. I click continue and a short time later it says its finished. All of my folders and mailboxes appear, but they are empty.
    At this point, mail will not quit, although the application does not appear to be frozen or busy. Command-Q causes the file menu to flash but nothing happens. If I force quit it and restart it, the mail viewer will not open, nor will Mail.app quit.
    My next plan was to try and boot back into 10.4 and see if there was some way to export my mail from 2.1.3.... before I attempt to do that, does anyone have any other suggestions?

    Did you try repairing permissions yet? Just because you have a fresh install of Mac OS X doesn't mean everything is as it should be. And you may not know that the mail format changed from 10.4 to 10.5, so you should try rebuilding your Mail index like this:
    1. Quit Mail if it's running.
    2. Go to ~/Library/Mail and delete the Envelope Index file(s).
    3. Restart Mail, wait for it to import your existing messages, then check to see if you have access to your older mail from 10.4.
    Mulder

  • Problem/NEED HELP: upgrade from CS5 standard to CS 5.5 design premium

    I specifically upraged to the design premium version to get the photoshop extended w/repousse and 3d. I've installed it and there is no extended version  installed. I need this function by Monday. Any help out there? I've tried some of the install troubleshooting, but they just don't answer this question.

    Well, does your computer actually support the required features? Is OpenGL enabled in PS? If not, you can't do anything with 3D. OpenGL support is mandatory. If it doesn't work you can try to update your graphics driver, but otherwise there is no way to enforce it. Also did you uninstall your Design Standard before installing Premium? if it's still using the old serioal number, then the features wouldn't show up in PS, eitehr.
    Mylenium

  • Jannuary 2014  -I need Upgrade from ios 4.3.5 to version 0.6.x -NO ios 7!-

    my iphone is MC605lP (iphone 4)
    the system is now in use ios 4.3.5 (8L1)
    I never upgraded to ios 7
    I need to upgrade from ios 4.3.5  to version 6.x.x or better for my iphone 4
    NO ios 7.x.x   !!!!
    Help can someone tell me how?
    Regards
    Stefano

    But many people on the web say: os 7 does not work on the old phone! (it will be true?)
    I'm afraid of losing the performace of the iPhone (and the data).
    so ... I can not get the right version because I forgot to download it?
    Are you sure?

  • I can't upgrade from IOS 6.0.1 to IOS 7.1.1. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation. Cannot restore or update in iTunes either. Help please?

    I can't upgrade from IOS 6.0.1 to IOS 7.1.1 on my iPad 2. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation if I try and install it. It claims that I have lost internet connection, which I have not. I cannot restore or update the iPad in iTunes either, if I try to, I get an error message which says that I 'do not have permission to access the requested resource'. I am using the latest version of iTunes on Windows 8. I have tried putting the iPad in recovery mode and restoring it with iTunes, the result is the same.
    Any help would be much appreciated.
    Thanks!

    @Rudegar
    Thanks for the reply, but I've been having this problem for well over a week. If it is a corrupt download, is there some way of deleting it from the iPad and getting a new one?
    Thanks

  • Hello guys i face a problem when i upgrade from iOS 4.2.1 to iOS 5.1.1  .when i upgrade i don' t found the camera app from the built in apps.when i try to install from the app store i don't  found the correct camera app .please help me .

    hello guys i face a problem when i upgrade from iOS 4.2.1 to iOS 5.1.1 on ipad 3 .when i upgrade i don' t found the camera app from the built in apps.when i try to install from the app store i don't  found the correct camera app .please help me .please give any suitable link where i find the correct camera app

    It's a built-in app, so it can't be deleted nor downloaded from the store. If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Camera being set 'off' ?
    If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT4972 I upgraded from ios 4.3.x to ios 7, but during final setup I input the lanuage (english) then it asks for the WiFi Network and it will not let me join the network

    I upgraded from ios 4.3.3 to ios 7, but during the final setup I input the language (english) and try to connect with my wifi and I get the message unable to join my home network.  How can I get past this so I can complete the setup?

    Are you using the encryption key code for your home wifi network?  The encryption key code is usually located on a sticker on the back of the router.

  • How do I upgrade from iOS 4 to iOS 7

    I need help upgrading my iPad I connected it and how does it go to the upgrade screen? I also downloaded iTunes

    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • How to upgrade from IOS 4.21 to higher

    Can anyone help, I need to upgrade my IOS on my IPOD from 4.21 to a higher version, preferrable the most current (IOS 7).  I tried syncing to ITunes but there do not seem to be an available update.  Is there any other way?
    Thanks
    Robert

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
      The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.
    Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • I need help,,upgraded to ipad2, laptop had to be restored b4 I backed up iPad or saved iTunes library. How do I back up and sync my ipad2 without losing content on my iPad.

    I need help,,upgraded to ipad2, my HP laptop had major issues and had to be restored b4 I could back up and save any content on the hard disc. So i havent backed up my iPad2 or saved my iTunes library.
    How do I back up and sync my ipad2 without losing content on my iPad.???
    I need really simple instructions as I've had a bad run with my laptop the last month.
    I have re-installed iTunes,it currently has no content in it
    all my music, photos etc had been saved to a an external Hardrive (phew)so I'm not concerned about losing them during a sync, but how do I sync my Ipad without losing the applications... The last back up saved was in June when I still had an ipad1
    I tried to back it up last night but kept getting the prompts something to the effect of "iPad can only be synced to 1 iTunes library, syncing will erase all content and replace with content on this iTunes library".  
    Help please,, I've already lost endless hours fixing my PC issues,so I'm not game to attempt this issue without guarantee I won't lose everything,need a simple solution that anyone can follow as my brain has information overload!!! Lol
    Thanks

    This should help you out. I copied this from another discussion a while back. Here is the original discussion link.
    https://discussions.apple.com/message/11527071#11527071
    This is what is in the discussion. It really doesn't get any easier than this.
    1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    2) Now connect your iPad to your laptop and start iTunes.
    3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
    4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
    5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
    6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
    If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.

  • I need to upgrade from  my present operating version of Mac OS X version 10.6.8 to the Snoe Leopard version which I am unable to find the app for. Is this version still offered as an upgrade?

    Hello,
    I need to upgrade from my present operating version Mac OS X , Version 10.6.8 to the Snow Leopard. However, I am unable to locate this app. Is it still available? Any help would be greatly appreciated.
    John

    Prior to upgrading to Maverick, you must FIRST make sure your iMac meets all of its system requirements. 

Maybe you are looking for

  • Output type is not getting triggered for ship to party in shippment output

    Hi, we have maintained output determination procedure for shipments. It was working fine. We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Applicatio

  • Transfer photos from iPhone 5 to iPhoto on Mac

    Sometimes my photos automatically transfer from the iphone to iphoto - or maybe I am doing something to cause it because I am playing around with it.  But it generally takes hours.  I want to do this quickly.  Can you tell me how?

  • Error in activating Transformation

    Hi Gurus We are using BI 7.0 and when we use amonut as a data type for one of the key figure ( Revenue )  , I am getting an error when I am trying to activate the transformation. Do you know which OSS note/ Support pack we have to apply? Thanks

  • Reason for ORA-00600: internal error code, arguments: [kkslpco-peek], [], ?

    In my Production DataBase , I am getting ORA-600 error in Alert log file. Already , i have applied the patch 10.2.0.4.0. Still, the database is throwing that error. What is the reason for this error and how to resolvw this error? Following is the ale

  • How to read a file outside my .jar

    Hello! I have my j2me application in a .jar file , and my application needs to read a .txt file which is outside my .jar but in the same directory. I tried to do : InputStream input = getClass().getResourceAsStream("/myfile.txt"); as well as InputStr