HT4972 i pod update from 4.1 to 4.2

update device from ios 4 to ios5

Yo may not be able to. Only the 3G and later can go to iOS 5 or later.
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)       
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1  Requires iTunes version 10.5 or later
- A 4G to 6.1.5  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 7. Requires iTunes 11.1 or later if you update via iTunes
Identifying iPod models

Similar Messages

  • HT4972 how to update from 4.3.5 to ios 5

    how to update from 4.3.5 to ios 5

    Connect to iTunes on the computer you usually Sync with and check for Updates...
    Full Details Here  >  Updating to iOS 5  >  http://support.apple.com/kb/HT4972

  • HT4972 Can you update from 4.3.5 to 6?

    Can you update from 4.3.5 to 6 if you've never upgraded to 5?
    Thank you

    1:You have to connect you device to you computer
    2: open iTunes
    3: select your device
    4: click on "check for update" a message should show up
    5: click on the button that says "download an install" then your device should shut down
    6: wait for about 20 to 40 minutes (it depends on the device)
                          Hope this helped!

  • HT4972 how about updating from 2.2.1 to anything

    how about updating from 2.2.1 to anything. I get an unknown error message and cannot go any further.

    Try on another computer
    Then see:
    -1 error
    -1 error too
    If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT4972 I cannot update from iOS 4.2.1

    I cannot update my iPad 1 from v4.2.1 to a newer version. Have tried connecting to my PC. The "Software update" button doesn't appear.

    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • HT4972 How to update from iOS4 to iOS5 ?

    Hello ! My iPad iOS4 now . How can I update ?  Because never come information for update iOS of my iPad .

    You can only update a device to the highest iOS version that it supports, which for an iPad 2 is iOS 7.0.4 - for how to do it follow the instructions on the page that you posted from.
    Connect the iPad to your computer's iTunes (you will need the latest version installed) and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad via File > Devices > Back Up.
    Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button

  • SNC kept receiving Non POD-related update from our R/3 system.

    Hi Nikhil and others,
    It seems our old problem below still exist.
    Background Process: Supplier will send ASN (advanceShpNotification) to us from SNC via IDOC (DESADV) to create an inbound delivery (IB) in our R/3. If the vendor is POD-related (i.e. maintained as POD in vendor master), then R/3 will only insert ouput type OP0D into the Output delivery table automatically upon IB creation. At this point, our R/3 has a build-in routine to stop sending IDOC (STPPOD) to SNC before GR. Only after GR is performed, the the IDOC (STPPOD) is triggered and send the POD notices to SNC.
    Problem/Question: Everything works fine in QAS client, however, problem arised in production in which SNC is receiving POD updates from our R/3 of IB with vendors that ARE NOT POD-related.  Now, the OP0D output type get insert into IB even with vendor that is NOT POD-related (i.e. not maintain in vendor master). WHY? I suspect is the OPOD problem, but this never happen in QAS. Why? The configuration setup are matched on both client, Why? 
    The following is our setup for WE20:
    Partner: PI Production Client
    Partner Type: LS
    1 - PORDCR1
    2 - PROACT
    3 - STPPOD (Transfer IDOC immediately ==> Checked, Output mode 2, Basic Type: Delvry03, message control is OP0D for Message type and Process mode, E1 is the application value.
    Partner: SNC production Client
    Partner Type: LS
    1 - DESADV
    2 - ORDRSP
    3 - WHSCON.
    The following is our setup for MN24:
    Delivery Type ==> "EL", Funct ==>"VN", Partner ==> empty , Medium = A, Date/Time = 4, Language = EN.... thanks tuffy

    Hi Tuffy,
    The OPOD gets inserted in Inbound Delivery depending on the setting maintained in MN24.
    Please, check what is the setting maintained for EL. If no partner is mentioned, the output message would be inserted for all Vendors but the STPPOD would only be generated for vendors which are POD relevant and for which Partner Profile is maintained.
    Regards,
    Sandeep

  • HT4972 do I need to copy all files on my iphone to update from 4.3.3 to 6.3

    do I need to copy all files on my iphone to update from 4.3.3 to 6.3

    Read the instructions in the article from which the statement was posted.

  • HT4972 I have an iPhone 3g and trying to update from 4.1 version to newest...help?

    I have an iPhone 3g and I am trying to update from 41. version to newest 6.1....won't wo rk...help!!

    The iPhone 3G cannot be updated beyond iOS 4.2.1.

  • HT4972 updating from ios 5.1.1, ipad keeps saying it has the latest version

    How to update from 5.1.1 when ipad says it has the latest version?

    The Original iPad can only be updated to IOS 5.1.1

  • IPad 2 will not update from version 4.3.5 (8L1).

    I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

    Naalamc wrote:
    It's an ASUS, Windows 8, Version 11.1.3.8
    Thank you.
    Your iPad has iOS 4... See Here >  http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • Error 1606 when installing i-tunes and i-pod updater

    Have searched for answers to this problem with no luck so apologies if this is a repeat. I have tried down loading latest version of I Tunes and I pod updater. Neither would install and came up with the following error - error 1606.could not access network location %userprofile%\begin menu\program\startup".
    I followed the instructions on the link to the Installer Web site for this Error and edited the registry (states that all entries (as listed) should refer to the correct drive i.e C: but did not show any examples.
    All but one registry key was correct. I ammended a string of keys that all had %userprofile%\ as the start.
    This allowed me to install ITunes however it would not add the several thousand songs that were alreday on the computer no matter what i did. So I changed the registry back and hey presto there was 4.9 with all my songs.
    However I still can not intstal ipod updater either from the disc that came with shuffle or from the download.
    Can any one please help??? Either tell me what to cahnge the registry keys to or explian how this has happened anyway.
    I have purchased 5 pods of one type or another for various people on three different computers. Updated all software regularly and never had this problem.
    Thanks
    Paul

    Yes ...followed the link and all instructions on it but not very confident about editing registy keys. Have also checked Microsoft but all that gave was more info on Registry editing.
    I have managed to by pass this problem by logging in as another user and installing software. Worked without problem but I have compared the registry entries and all seem the same!
    Very Strange.

  • I'm trying to update from version 4.1 and it shows device not elligibleAsk your question.

    I try to update from version 4.1, but it shows in ITunes device not elligible. I have the latest version of ITunes, but it seems the phone is a problem. None of the aplications work properly, Facebook and Safari cut off....

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • How I fixed the i-pod updater issue!

    Seems everyone is having issues with this latest update. IT happened to both of my i-pods. One ipod totally froze and I had to open the unit and disconnect the battery to get it to reboot. The ultimate fix is to remove the Jan 06 ipod updater from your computer, your i-pod, and use the previous version. I removed both itunes and ipod software from my laptop and reinstalled using the CD that came with the unit. After reinstalling, I updated the i-tunes software only!!! Then I restored the software on the i-pod back to the original factory version. This will remove all music and files from your ipod. DO NOT UPDATE THE I-POD SOFTWARE TO THE JAN 06 VERSION! When connecting your i-pod, it will recommend that you do so. Choose cancel and reload your music. You will have to update i-tunes to the newest version first for this to work since your music is stored in "My Music" folder. I hope this helps.

    Seems everyone is having issues with this latest
    update. IT happened to both of my i-pods. One ipod
    totally froze and I had to open the unit and
    disconnect the battery to get it to reboot. The
    ultimate fix is to remove the Jan 06 ipod updater
    from your computer, your i-pod, and use the previous
    version. I removed both itunes and ipod software from
    my laptop and reinstalled using the CD that came with
    the unit. After reinstalling, I updated the i-tunes
    software only!!! Then I restored the software on the
    i-pod back to the original factory version. This will
    remove all music and files from your ipod. DO NOT
    UPDATE THE I-POD SOFTWARE TO THE JAN 06 VERSION! When
    connecting your i-pod, it will recommend that you do
    so. Choose cancel and reload your music. You will
    have to update i-tunes to the newest version first
    for this to work since your music is stored in "My
    Music" folder. I hope this helps.
    The best advice was to drop it from waist high with a cover on it. I had tried everything else but after four drops this has cleared the problem. I too had suffered this after the Jan 06 update - although nowhere near the problems I had after downloading Itunes 6. What is the matter with you Apple? - please stop "improving"
    Ipod 20Gb   Windows XP Pro  

  • Photoshop cc 2014 slow after update from mac os 10.9 to 10.10.2

    hello
    i have update from 10.9 to 10.10.2 i am using a mac pro 2012  2.4 ghz 6 cores 48GB ram and a NVIDIA Quadro K5000 3583 MB
    since i update photoshop is extremely slow
    any function takes much longer to render , and i am now trying to reverte to the back up runing 10.9.5 again but before that would liek to know if someone can please help me
    towards any advice how to try to speed up photoshop been cc or cc2014
    thanks
    luis
    Reply

    Kitcateleven please see Error U44M1I210 | Install updates for information on how to resolve the U44M1I210 error.

Maybe you are looking for