HT4972 Instruction somewhat unclear. How do you go about actually starting the update?

I would like to know how iOS 4.1 would be updated. Does it have to be wired? Or can it be done wirelessly? It's not giving an option under settings for "update".

Just attach your phone to your computer and do the update through iTunes, but this does all depend on what phone you are using?
If you have an iPhone 3g, then iOS 4 is the last update that you can get on this phone, so this is probably why you can't update.

Similar Messages

When slides are updated within a MS Sharepoint slide library, how can you force an alert with the updated slide version going to users who have previous slide versions on their hard drive?

How can you hardcode/force that when a slide within a slide library (in Sharepoint 2010) is updated, that an alert is sent to the user who downloaded the slide to their hard drive so that they may replace the outdated slide with the recently
updated slide. There is a tic box option to set when downloading slides from a sharepoint slide library into power point that ensures alerts are sent when the presentation is opened allowing for replacement of the slide. But, it is an option. How can that
be hardcoded are forced on all slide library users who download slides from the shrepoint library into power point? Is there a workflow that can be written in Sharepoint or an option in power point to do this? Please advise. Thanks.

Two things to check:
Add the network folder location as a trusted location in your Flash Global Security settings and then see if the videos will play.
If the first suggestion doesn't work, get in touch with your network admin dudes and find out if FLV files are disabled from working over the network from that location. Many times unless a given file format is enabled on a network, the server assumes it's not desirable and won't serve it.

Multiple triggring events - How can you identify which one started the wf?

Hi all,
I would like to know if there is a way of identifying which triggering event started the wf.
The situation is like this: i have a workflow that can be started by one of 6 triggering events (6 different situations for vendor master data - creation needed, extension needed, change needed and so on). I have to do different steps inside the workflow function of which event actually triggered the wf.
Is there a container element that gets some sort of identification for the event that actually triggered the wf?
I found a container element that holds the name of the event but it's a multiline container element (so i guess it holds all the event names) and i can't use it in a multiple condition.
Thank you
Cristina

for those events, you can add want you want as abap dictionary
it doesn't matter, just look in SE11, where you can find any kind of data element of type char1 and use that one.
Those events, are those standard events or events that you trigger yourself with the function SWE_EVENT_CREATE?
Edited by: Kristof De Bruecker on Mar 24, 2010 2:56 PM

HT4314 How do you view your profile on the updated version on game center

How do i view my profile in the game center

Hi,
Open the Game Center app, and tap on the left button Me
Hope that helps

How do you number pages but start the numbering on the second page, while omitting the page number from the first page (my title page)

I have recently changed from Word to Pages 5.5. I want to create a document with a title page (no number) and the second page as Page 1. It is quite simple to do in Word, but I cannot find a way to do it in Pages.

Hi Ryanlipp;
Insert a section break
Place cursor in the newly created section (page)
     In the Document panel:
select Insert page number: 1.
Under Numbering, select start at: 1
                 It starts numbering from number 1 in the new page (2nd page).
Now place the cursor in the previous page (Ist page).
Select Hide on first page section.
                 This hides page number in the first page of the document.
I hope, this is what you are after.
Regards,

How do you delete duplicate photos in the photo section of your iPad?

How do you delete duplicate photos in the photo section of your iPad? My iPad has duplicated n tripled my photos n want let me delete them. I can delete photos from any other section but not in photos, this is taken up all my memory. Help!!

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

HT4623 im trying to update my phone and have goggled how to but my phone does not have the option to click on software update has anyone else had this problem and if so how did you go about it. thanks in advance.

Im trying to update my iphone 4s as i can't dowload alot of thing as it says i need to update to IOS 5 i have googgled how to do it but my phone does not have software update option on it. does anyonw know how to fix this problem or had this problem? if so how did you go around fixing it and updating the phone. thanks in advance.

gemsmobiletans wrote:
my phone does not have software update option on it.
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes Installed
iTunes free download from www.itunes.com/download
Note:
The Current iOS for the iPhone 4s is iOS 7.

HT1386 How do you sync your itunes from the Iphone to the macbook pro?

How do you sync your itunes from the iphone to the macbook pro?
Let's say, I have an Iphone 3GS and it was synced to my older pc (I know...) and it crashed and I can't retrieve my files on there. I want everything that I have on my 3Gs: photos, videos, music, notes, voice recordings, etc... Now, I recently upgraded to 4Gs. I can sync almost everything via icloud but there are files like photos, videos, other music that I cannot sync or for some weird reason it won't work over the cloud. So I want to move all of those information to my macbook pro (upgraded from pc... yes!). How do I move everything in my iphone backed up to my itunes in my mac book so that I can sync it to my new 4Gs?

I have a 3GS IPhone and have not been able to find Cloud on it anywhere (I was instructed to go to Settings, General, etc). I have also been told I should download update from I Tunes and have not been successful doing that either. I know my I Pad has the Cloud and I am wanting to sync the calendar from the phone to the pad. Any suggestions?

How do you make adobe X open the "combine pdf" window in the foreground?

This may not be the correct forum for this question, but considering that I simply
have not been able to get a reply in any other Adobe forum, I decided
to just post this question to ALL Adobe forums until I get a response.........
How do you make adobe X open the "combine pdf" window in the foreground?
I am using a "Windows 7" computer at work with "Acrobat X Pro" and I'm constantly combining
pdf's and tiff's in Acrobat.
It would be nice if when I select 30 or 40 files to combine, the *******
"Combine Supported Files in Adobe Acrobat" window would open in the
foreground, not behind the 10 or so windows already open.
I have been researching this for some time now with no solution.
If the answer is that "IT CAN'T BE DONE", then that's fine. At least
I will have an answer and can stop searching. If (as I suspect) it can
be done, then kindly supply me with "step by step" instructions.
Michael Jones

Hi ,
I guess that was a bug in that version .
It does not happen in Acrobat XI and Acrobat DC .The window comes right in front of everything else .
I wonder that was a bug and that was fixed the other versions.
You could upgrade to the latest Acrobat version ,i.e Acrobat DC and you would not experience this anymore .
Regards
Sukrit Dhingra

How do you clean out a start up disk

Hi, How do you clean out a Start up Disk to gain more room?
Thanks

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

HT1420 How do you do this? From the Store menu, choose Authorize This Computer. there is no option to Authorize This Compyter from the iTunes "store"!!!???

How do you do this? From the Store menu, choose Authorize This Computer. there is no option to Authorize This Compyter from the iTunes "store"!!!???

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(89775)

How do you disable voice announcements on the Gusto 3 ?

How do you disable Voice Announcements on the Gusto 3 >

Thanks for reaching out to us, tobrien459! May I ask what readouts you are getting in order for me to make sure I provide you with the most accurate information?
I'm thinking you are looking for this:
From the Home screen, press the Left Soft Key
Menu > Settings > Accessibility > Easy Set-up.
2. Follow the screen prompts to choose settings for
Full Readout, Menu Readout, Digit Dial Readout,
Alert Readout, TXT Message Readout, Browser
Readout, and Flip Open & Talk
Let me know if this is what you need.
TamaraH_VZW
Follow us on Twitter @VZWSupport

How do you encript voice memos in the itunes library so no one else at the computer can listen to them?

How do you encrypt voice memos in the itunes library so no one else at your computer can listen to them?

iTunes has no ability to encrypt anything. You'll need to search for encryption software appropriate for whatever type of computer you have. Or, you could set up separate accounts for other users of your computer and password your account.

How do you shut down apps on the 5s?

How do you shut down apps on the 5s?

Been asked a thousand times in the past two days... look to your right under "More Like This" for related discussions. ------->
Or, take a look at the User Guide

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

HT4972 Instruction somewhat unclear. How do you go about actually starting the update?

Similar Messages

Maybe you are looking for