HT4972 is there a way to tell which computer an ipad syncs with?

I have tried to sync and update my ipad on my family's 3 different mac's, and i get a dialog box on each saying to sync with the computer you normally sync with.  i am pretty sure it is one of these three mac's.  Is there any way to tell which computer an ipad is syncing with?  Or how to tell which apps are backed up and will remain after the update?  thanks

No.

Similar Messages

  • Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

    Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
    I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
    I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
    As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

    Answer would be no unless application provided such feature. Numbers does not as far as I know.
    Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
    E.g., cell T20 is referenced not only in
    =T20+1
    but also in
    =SUM(T)
    =SUM(20:20)
    =SUM(S19:U22)
    =OFFSET(S1,19,1,1,1)
    =INDIRECT("T"&(10*2))
    In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
    Sorry to be the bearer of bad tidings.
    H

  • Is there a way to move Messages and Local (not synced with iCloud) notes from old iPhone to new one ?

    Is there a way to move Messages and Local (not synced with iCloud) notes from old iPhone to new one ?

    Yes, it will. You cannot merge information on the phone. If you want the old messages, you will need to restore from a backup of the old phone, which will make the new phone look just like the old phone. If you want to save the messages from the new phone, you will not be able to get the messages from the old phone.

  • Is there a way to view pictures on the iPad air with Sd card

    Is there a way to view pictures on the iPad air with Sd card

    If you have the camera connection kit you can view thumbnails. but you can only view them full sized if you import them onto the ipad.

  • AVM1 into AVM2. Is there a way to tell which is being loaded?

    I have an app that users can load SWF files into. It's
    written in AS3 (AVM2).
    Currently, they can load both AVM1 and AVM2 SWF files into
    it. Id like to give the users an alert when they load AVM1 content.
    Is there a way to tell when AVM1 is being loaded...maybe a property
    I should check in the loaded SWF?

    I figured it out. Thanks.

  • Is there a way to tell which apple ID I have is better to back up to icloud?

    I want to back my iphone 4s onto icloud, but I have 2 apple ID's.  I don't know which one I should use; does it matter what I' ve purchased on either account? Is there a way to see which account I have used to purchase more?  I don't want to lose contacts, pictures, songs, etc
    thanks!

    You are mixing icloud accounts with itunes accounts - they are different.  You can use the same or different IDs for each account.  I recommend that you use the ID that was used to buy the most items from the itunes store when setting up the store connection on the device.  You'll lose access to the items bought using the other ID (only one ID at a time for the store is allowed).
    As for icloud, you can only connect to one icloud account for all the features.  Choose the one (the ID) that has the contacts, etc. that you want.  Use that ID for the icloud connection (Settings>icloud).

  • Is there a way to tell which apps are using data while on WIFI?

    Hello,
    I have just purchased an iPad Air 2.  I use my phone as a mobile WIFI hot spot to connect to the internet when I do not have a regular WIFI connection available.  151 MBs of data were consumed over an hour and a half or so.  I played about an hour of Hearthstone, but I know from tethering my phone to my laptop that it usually doesn't use anywhere near that amount of data.
    I would like to track down which applications might be using the data so that I can avoid using them while connected to my phone.  Is there any way to do this?

    Thanks for the quick response.  That's a little disappointing though.  Is there an app on the store?

  • HT1933 is there any way to tell which device an in app purchase was made from.  I have 4 ipads and need to see who made the unauthorized purchase.

    I need to see which of my ipads specific in app purchases were made from.  Is that possible. 

    No
    Sorry

  • Is there a way to see what files iTunes just synced with my iPhone?

    OK, I've been working with my music files trying to find some sort of work-around to iTunes not updating or deleting my lyrics on my iPhone.  I been working on one music file at a time.  I'll make a change of some sort, then have iTunes "Sync" to my iPhone which is connected directly  to the laptop.
    I've only updated ONE file, but I see iTunes syncing many files.  The first time I can see why, but I'm doing my syncing mere minutes apart, so after the first sync, I would think the only thing to be "synced" would be the one music file I just changed, but I keep seeing others.
    The problem is, the list of files being synced goes by too fast to read.
    Is there a way in iTunes to see a list of what files it just synced with my iPhone?
    I'm using iTunes 11 on a Windows 7 Home Premium system.

    What exactly does the Library item contain?
    Have you thought of changing the Library item to a Server Side Include instead?
    Takes all the tedium out of updating by letting the server do the mundane work for you.
    Create one text file (containing the current Library item code), add a single include statement in all website pages to include the text file. Upload. The entire website is then up-to-date.
    To update all affected pages in future, you merely edit the one small text file (the Include), upload and you're done.

  • How do you tell which computer you origionally sync the ipod touch with?

    I went to do the 2.0 update for ipod touch but it says make sure you have the ipod connected with the computer you sync with. I sync with both my mac and laptop but I think they mean the origional one you started with. How do you tell which one?

    Make it the one. You have the power!
    What they want is to make sure you are not doing this somewhere that you may lose the ability to connect the iPod (work, friend's house, internet cafe, library) because there is a file that will be downloaded to the computer, and if you need to restore at some point, iTunes will need that file.

  • Is there a way to remove a computer from Weave/Sync?

    I just sold a computer that I used to associate with weave, but some of the stuff from that computer is still showing up on my other computers. Is there a way to get that stuff out of the DB, since I no longer care about it, and have sold that computer?
    Like, for example, in my "Tabs from Other Computers" screen, my sold computer is still listed as a computer, taking up space. How do I get rid of it?
    == This happened ==
    Every time Firefox opened
    == I look in various places where data remains from the other computer.

    That doesn't help when the system in question has been destroyed. We need a way to just make it forget a system.

  • On iPhoto you can click info and see which camera was the source for the photograph, is there any way to identify which camera took the video on iMovie?

    Is there a way to determine which camera was the source for video clips in iMovie?  You can do this in iPhoto by clicking info but I can't find out how to do it in iMovie.

    Not as far as I know.  (you can often tell from the file name format).
    Geoff.

  • Is there a way to tell what settings were used to export a PDF?

    Is there any way to tell what export settings were used to create a PDF? I'm trying to recreate settings used in a previous PDF.

    Most of which are controlled by the Export options used;
    Description
        KK Stevens
    PDF Preset: CC to PDF for KKSPC-Flattened
    Compatibility: Acrobat 4 (PDF 1.3)
    Standards Compliance: None
    General
        Pages: All
        Spreads: Off
        Generate Thumbnails: On
        Optimize PDF: Off
        Create Acrobat Layers: N/A
        Export Layers: Visible and Printable Layers
        Include Bookmarks: Off
        Include Hyperlinks: Off
        Export Nonprinting Objects: Off
        Export Visible Guides and Baseline Grids: Off
        Create Tagged PDF: Off
        Interactive Elements: Do Not Include
    Compression
        Color Images
            Bicubic Downsample at: 300 ppi
            for images above: 300 ppi
            Compression: ZIP
            Tile Size: N/A
            Quality: 8 Bit
        Grayscale Images
            Bicubic Downsample at: 300 ppi
            for images above: 300 ppi
            Compression: ZIP
            Tile Size: N/A
            Quality: 8 Bit
        Monochrome Images
            Downsample at: 1200 ppi
            for images above: 1200 ppi
            Compression: CCITT Group 4
        Compress Text and Line Art: On
        Crop Image Data to Frames: On
    Marks and Bleeds
        Crop Marks: Off
        Bleed Marks: Off
        Registration Marks: Off
        Color Bars: Off
        Page Information: Off
        Page Mark Type: Default
        Weight: 0.125 pt
        Offset: 0.125 in
        Use Document Bleed Settings: Off
        Bleed Top: 0.125 in
        Bleed Bottom: 0.125 in
        Bleed Left: 0.125 in
        Bleed Right: 0.125 in
        Include Slug Area: Off
    Output
        Color Conversion: No Color Conversion
        Destination: N/A
        Profile Inclusion Policy: Don't Include Profiles
        Simulate Overprint: Off
        Output Intent Profile Name: N/A
        Output Condition: N/A
        Output Condition Identifier: N/A
        Registry Name: N/A
    Advanced
        Subset Fonts Below: 1%
        Omit PDF: Off
        Omit EPS: Off
        Omit Bitmap Images: Off
        Transparency Flattener Preset: [High Resolution]
        Ignore Spread Overrides: Off
    Warnings

  • Is there any Way to find Which case is Executing in LabVIEW VI programmat​ically and Display it..

    Is there any Way to find Which case is Executing in LabVIEW VI programmatically and Display it..
    Solved!
    Go to Solution.

    I wrote this a few years ago: http://lavag.org/files/file/199-state-machine-foll​ower/
    This JKI RCF Plugin sets the Visible Frame property of a Case Structure while the owning VI is running. Use it to follow the execution through the cases in your string-based State Machine/Sequencer when Execution Highlighting isn't fast enough (and, it's never fast enough).
    The use-case I wrote this to improve is setting a Breakpoint on the Error wire coming out of the main Case Structure and probing the Case Selector terminal so I can float-probe wires during execution. The problem with this is that I had to manually select the current frame every time. This is boring, so I developed this plugin to automatically set the Visible Frame to the case most recently executed.
    You might be able to adapt it to your needs.  The basic idea is that a custom probe on the wire to the Case structure's selection terminal sends a notification to a VI that displays the appropriate case.
    We might be able to help you develop something easier if you'll give us more information.  Is it OK if the code to display the case is in the same VI?
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

  • Is there some way to tell lightroom to just re-export the previously exported files?

    Shot a celebration (Park, Mass and Party), went home and processed the raw files in Lightroom, Exported them into 3 folders.
    Then I proceeded to edit the files in photoshop, first folder that consisted of the park went well. Files looks great, even after compressing them again.
    Then up were the Mass pictures and that's where it all went down hill. When I loaded up the first image it was compressed to hell All the black areas were all pixelated, so I went into lightroom and sure enough it changed the quality from 100% down to 60%!
    All my other settings were the same so I didn't accidentally reset the whole thing. Not sure why or how Lightroom did this, I've had it on 100% for the past 2 years!
    Now I have to export them all over again, the trouble is there was 800 that I culled down to just 150. I really don't want to hand pick them all over again.
    Is there some way to tell lightroom to just re-export the previously exported files?

    The short answer: no.
    Lightroom remembers recently imported files in a collection, but does not remember recently exported files.
    That said, you could use the SQLiteroom plugin (free, by me) to round up a collection of *all* exported files, which might help.
    Rob

Maybe you are looking for