HT4972 My iphone 4s keeps freezing and runs really slow, and my camera is aweful! Ive deleted everything i dont use and have loads of memory so any ideas what i can do?
My phone is slow but has lots of memory i have updated it recently also it freezes alot and the camera has only flash settings and no other.. It also constantly says no service and i cant use my internet when away from home because im charged £10 for maybe 5 mins if im lucky so does anyone know what i can do?
Hello CJPSYC,
Thanks for using Apple Support Communities.
For the no service you can follow this article which also suggests to restore the phone. Restoring the phone can help resolve the freezing.
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Turn iPhone off and then on again.
Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Restore the iPhone.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Have a nice day,
Mario
Similar Messages
-
Hello I'm upgrading my iPhone 4S tmw to a iPhone 5c , I also have a iPad which I've used iCloud to get pics from phone to iPad, obviously if I delete my phone pics there gonna go from iPad too. Any idea what I can do please?
In addition to the very sound and useful information posted by Lawrence Finch, there is also a way to save the photos from the photo stream to the camera roll on the iPad so that even if the photo stream is turned off, the photos will remain on the iPad.
Launch the photos app and them open the Photo Stream album. Select every photo that you want to save by tapping on them, then tap in the action/sharing icon and select - Save to Camera Roll.
Having said that, the information that Lawrence shared with you is very important and the instructions in both articles are very useful. Make use of them. -
I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either
Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
Maybe it's time to buy yourself a new iPod Touch. -
I recently reset my phone and I have been asked to activate my iphone but I don't know either my email or password and I cannot get on to my phone any ideas what I can do?
Hi Meganmay22,
Welcome to the Apple Support Communities!
It sounds like the iPhone is in a status called Activation Lock. Please use the following article for information on Activation Lock; it includes information on locating your Apple ID.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Have a great day,
Joe -
Hi my iPhone does not have reception. I have tried the sim in a different phone and it has reception. Any ideas what I can do
try these things
-reset your network by going setting> general>reset>reset network setting
-toggle airplane mode on and off
-then back up your information and then restore as new.
-still no service then if your within your limited warranty apple can replace it for nothing if not it is 199$ for replacement -
I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer. I've tried all the steps suggested above but still no joy. Anyone have any ideas what i can do next? Thanks Paul
Sounds like you have a "damaged track" or "damaged file".
This worked for me today downloading Kendrick Lamar's new Album "good kid, m.A.A.d city".
My situation: I bought the album today for my Mac, MacBook Pro, iPad 2, and iPhone 4S devices.
Issue: One song (only on my MacBook Pro) would not play, instead display "
EX: left"
Solution: 1. Manually delete the song (giving you the error) permantly from the authorized computer.
2. Open iTunes, Click iTunes Store (left sidebar), and locate Quick Links and then click Purchased to proceed.
3. Click "Not On This Computer", find the song that wouldn't play, and re-download it again.
4. Check your Music Library for your song (Should download inside the associated album) and hit play.
EX: (Song I purchased that wouldn't play because of authorization, playing)
Enjoy! -
Hello I went to wipe my 1st generation iPad and then tried to update the iOS now the iPad won't work at all any ideas what I can do?
You can't update the original iPad beyond iOS 5.1.1 so if you were already running that version, there was no reason to wipe the iPad to try to update.
Won't work at all, doesn't tell me the whole story. Does it power up but not respond to anything? Does it not power up at all? Some detailed information in context would really be helpful.
IF the device will not start up, try a reset. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple Logo appears on the screen. -
hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?
Ah!
Factuur Bright x
part of errors:
Process: Factuur Bright X [1476]
Path: /Applications/Factuur Bright X/Factuur Bright X.app/Contents/MacOS/Factuur Bright X
Identifier: ???
Version: ??? (2.0.0b20)
Code Type: X86 (Native)
Parent Process: launchd [184]
User ID: 501
Date/Time: 2013-07-10 22:35:39.180 +0200
OS Version: Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report: 2118 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 24 sec
Per-App Crashes Since Last Report: 1
Anonymous UUID: 47D641A2-4625-7590-369C-8BAFE1439551
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000010 -
I am trying to open my Preview application to view a PDF. However nothing opens and an error message, "Error -1712" pops up. Any ideas what I can do to resolve this?
Restart. If an application won't quit and prevents restarting, select
▹ Force Quit...
from the menu bar, then select the frozen application from the list and press return. As a last resort, force a shutdown by holding down the power button for a few seconds. Then press it again briefly to start up. Test. -
I have had Aperture since version 1.0 and bought every upgrade. Now I want to transfer the software to my new iMac but I have to enter the original Serial number that I cannot locate. Any ideas what I can do, please?
The original serial number should be in the box with the installer disk.
If you cannot locate the serial number, contact Apple for a replacement serial number. You will need to provide a proof of purchase.
See: Pro Application Replacement Serial Numbers
Regards
Léonie
P.S. The menu command "Aperture > About Aperture" will show you your Aperture 3 serial number on your old mac, but not the previous serial numbers. -
I started downloading a video from iTunes last night on my ipad when my wifi dropped out. Once I'd reconnected my wifi I tried to recommence the download but it kept saying that download was not available at this time. I then tried the steps in iTunes help but got the same message. Finally, I deleted the video (the part that had downloaded) from my video section and tried to start the download again from the start. However, when I go to iTunes it's still trying to download the original and even this morning I'm still getting the error message. Any ideas what I could do to get the video downloaded? I currently only have access to my ipad. Thanks.
I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?
Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx -
This week, my iPod nano suddenly seemed to have lost all the music that was on it.
when connecting to iTunes, it showed that the music was still there.
I tries to create a new playlist with 1 song in it and according to iTunes, that was successfull.
the iPod however still said 0 numbers are available in the music list.
finally, i executed the restore factory settings and that process failed.
the device immediately switched to blank screen and is dead since then.
when I connect the iPod to the computer, the computer detects that a device is connected and even recognizes it as an iPod.
however, the device is not visisble in the windows explorer.
iTunes automatically starts but shows the error message: the connected iPod cannot be identified ... unrecognized error (2005).
Does someone have an idea what I can do to make the iPod work again?
thanks!I tried by connecting to another available PC.
I newly installed iTunes on a PC that did not have the installation.
Connecting the iPod to this PC gave following error: "The iPod software update server could not be contacted. The server does not support this version of iTunes."
I followed the instructions in the "more information" section: iTunes version is the latest available; operating system version is up-to-date, no security obstructions and I rebooted my pc as suggested.
Next attempt to connect the iPod gave another error: "An iPod has been detected, but could not be identified properly. Please disconnect and reconnect the iPod, then try again. An unknown error occurred (2005)".
This is exactly the same error as on the first PC.
the iPod is still out of use -
IMac freezes or runs really slow
I have now on several occasions run into the fact that mu iMac i frozen or horribly slow. I've, by using the Disk Utility, found out that on all of these occasions the hard disk have had several errors. Wrong number of files, bad hierarchy and so on. Disk Utility has been able to correct these, but after a while I'm into the same problem. What is causing this ? Should I worry about the hard disk physical condition. Luckily I've got TimeMachine running.
See these:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X, and
Myths of required versus not required maintenance for Mac OS X for starters. -
my iphone 4s won't even let me turn on wi-fi in the settings... the on/off slider is grayed out and I can't manioulate it. Any recommendations that I can use to remedy this frustrating issue?
iOS: Wi-Fi settings grayed out or dim
Maybe you are looking for
-
Home Sharing: Half loading and skipping problems
Hello all Firstly, thank you to those that are reading this with a view to helping, and to those that will, hopefully, reply. I am looking at getting my iTunes library shared in my home. My current set up is simple: 2011 MBP, iPhones, iPad, all music
-
Performance issue: stmt.execute() takes a long time when using Oracle objs
Folks, I have a PL/SQL API that returns a REF CURSOR over an Oracle object that contains other objects. In the JDBC layer, when I do a stmt.execute(), it takes about 1.2s for this statement to run while the execution of the PL/SQL API in the database
-
Dynamic authentication using OWSM
If I have a service that changes employees pay rate. I want to put security on this. For added measure I want to encode the password. Can I set this dynamically in the calling BPEL process. If not then there is a potential security breach as the user
-
BAPI to maintain HR Infotype 0491
Is there a BAPI that will create/update HR Infotype 0491 - Payroll Outsourcing? I can't seem to find any Infotype related BAPI's in transaction "BAPI".
-
I am using Jdev 11.1.1.5.0 - weblogic 10.3.5.0 Standalone, I deployed my project on static IP. I can access and transact the project fine in web browsers. fine. Now I am trying to access the URL from mobile(Android version - 2.3.6 [GingerBread.DDKL2]