HT4972 trying to get ios5
I do not have an option 'Software' under my settings category, says this is a 4.3.3 version. How do I get ios5 on here?
dianecarter wrote:
I do not have an option 'Software' under my settings category, ...
That is only a feature of iOS 5 or later...
You have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Note:
iPad 1 will go to iOS 5.1.1
iPad 2 will go to the latest iOS which is currently iOS 6.1.3
Similar Messages
-
Need to update my iPad b/c my apps are trying to install updates but I'm getting the error message "need iOS5" but cant find how to do that.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623 -
HT4972 Trying to install iOS5 on my first gen iPad
When I go to follow these steps, my iPad wants to download iOS6 which it doesn't support, so the download fails. Or rather, it fails at the install point a couple hours later.
How do I tell it, or force it, to download an earlier version, such as 5.0. (We still have 4.3.2 or something on it)
Can I find and download the earlier OS somewhere online. Or are we out of luck now.If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
i have tried to update my iphone 3gs and i need to get ios5 and when i click on check for updates it says that itunes can not be contacted and check my internet connection but i have internet? how else can i get ios5 on my phone?
edit the hosts file on your computer and remove any lines that contain gs.apple.com. Disable your antivirus and firewall.
-
Tried to get an app from app store and it said I needed to download iOS 5.1. Treks to follow directions here and on my settings page it doesn't have an option for "software updates". Any help?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off
Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Basically, i need all my old stuff from my iphone 4 with ios5 onto my new iphone 4. The new phone i received only had ios4. I went to get all my contacts and backup from my old phone onto my new phone and it wont let me because my new phone is only ios4 and my backup from my old phone was in ios5. I cant get ios5 on my phone without creating a new backup of my new phone, which has nothing on it. If i restore it as a new phone and backup virtually nothing from my new phone, will that get rid of all my old backup stuff from my old iphone?
Bottom line is you CANNOT restore to a phone from a backup that has a more recent iOS which is what you're trying to do. Just can't be done.
-
I have upgrades waiting but when I try to download, message says... iOS 5 required.
How do I get iOS5?iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I am trying to get the iOS5 on my ipod touch. iTunes says I have the latest updates (10.5). My Mac does not have the iOS5. Do I need to get iOS5 for my computer before I can get the benefits on my ipod touch?
If you have a 3G iPod it may really be a 2G iPod. If it is 8 or 16 GB it is a 2G iPod. Apple only made 32 and 64 GB 3G iPods. A 32 GB one can be either. To identify ours see:
Identifying iPod models -
The Ipad2 I purchased was before IOS5 according to folks at Apple Store. Tried to downloan IOS5 but now Itunes is showing the message "Restoring Ipad firmware" and will not disconnect. The message has been going on now for almost 24 hours. How do I get restore all functions (including IOS5) and get Ipad back?
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
HT4623 Don't have "software update" option. How do I get ios5 on ipad
Don't have "software update" option. How do I get ios5 on ipad
The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 or earlier on it then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases if you are on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
An iPad 2 will update to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change. -
Im trying to get the ios 4.1.2 on my iPod touch 2nd generation. Can I install it directly on my iPod . My iTunes on my computer isn't working!
you have to have itunes installed but check out http://support.apple.com/kb/ht4623.
-
I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
Trying to get Essbase Client 11.1.2.3 for Linux 32bit, please need help
Hello,
I am running a RedHat Enterprise Linux 6.4 64-bit system and have an application that requires the 32-bit Essbase Client 11.1.2.X libraries in order to connect to an Essbase 11.1.2 server instance.
From reading through the forum posts for the past couple days I have come to an understanding that Oracle Essbase 11.1.2 no longer ships a Linux client as a separate assembly so you have to install the full Essbase server then extract the client files out of that to use.. So I am trying to get the correct bundle of files downloaded to even get the installer to launch properly so I can select a minimal installation including client components, but I can't get the correct zip files, I am getting close, but there is still a few missing, and the instructions I have found seem to refer to 11.1.1.X versions that have changed quite a bit in the 11.1.2.X version.
Can anyone please help me figure out what I am still missing to get the install running and how to extract the client libraries?
So far, I have downloaded:
2073792430 Apr 22 11:43 Apps-11123-linux32.zip
2440713397 Apr 22 11:46 ClientInstallers-11123.zip
554953827 Apr 22 11:47 Essbase-11123-linux32.zip
171726540 Jun 20 09:08 FinancialManagementAnalytics-11123-linux32.zip
1053291166 Apr 22 11:52 Foundation-11123-linux32-Part1.zip
1603812256 Apr 22 11:53 Foundation-11123-linux32-Part2.zip
939688909 Apr 22 11:53 Foundation-11123-linux32-Part4.zip
1597577101 Apr 22 11:55 Foundation-11123-Part3.zip
1801831469 Apr 22 12:01 OHS-11123-linux32.zip
366584941 Apr 22 12:04 RA-11123-linux32.zip
BUT I still have the following missing assemblies I can't account for:
EPMINS-01001: One or more preinstallation checks failed. Correct the errors before continuing with the installation.
Check assemblies: /home/ntruhan/Downloads/essbase/assemblies/biplus_product_reporting_client... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
Failed! EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/hfm_services... Not exists
/home/ntruhan/Downloads/essbase/assemblies/dbclient64... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/hsf_server... Not exists
/home/ntruhan/Downloads/essbase/assemblies/dbclient32... Not exists
/home/ntruhan/Downloads/essbase/assemblies/fdm... Not exists
Failed!
EPMINS-01084: Assembly for linux32 platform is used
Failed!
EPMINS-01084: Assembly for linux32 platform is used
/home/ntruhan/Downloads/essbase/assemblies/bpm_architect_services... Not exists
/home/ntruhan/Downloads/essbase/assemblies/hsf_webapp... Not exists
I am going through the list of entries, but the only references I have seen so far have been for Windows downloads and this is linux, and then there are the Assembly for linux32 messages, but I need that since I need the 32bit client libraries, right?
Can someone shed some light on this adventure in installing all of this since all of the install instructions I have been seeing are for an older version packaged differently?
Thank you in advance,
NathanThank you for this. It set me on the right path. I wound up installing all of them as I was still getting those errors, but after I realized the REAL error was not the aseemblies not exsisting, but it was the "EPMINS-01084: Assembly for linux32 platform is used Failed!" error.
The Linux System i was TRYING to install on is RHEL 64bit, but I was trying to install a 32bit client as i needed a 32bit client. It just refused to install a 32bit client on a 64bit Linux machine.
I configured a CentOS 32bit Linux VMWare image and viola, the same driver files installed without an error.
Not sure why the 32bit client would not let me install on a 64bit system, but I finally got it now.
Now to tar the Essbase directories up and move them over to the RedHat machine where I need them.
Thank you for your help. -
I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not currently authorized for use with your Adobe ID." It does it with every single book. I've never had this problem before. I've tried everything! Please help.
same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please
Maybe you are looking for
-
Data Recovery Help Please!
I lost all my data during the iOS 7 update... is there anyway i can get it back? i didnt back up my phone before the update.
-
Re: Nokia N8 and Ovi related problems.
ovi store didn't open.what can i do
-
Issue with programmatic clipboard access in IE7
I have a J2EE application. The application is an intranet application. We have an ActiveX component (Far point Spread control) in the web page to display the data. We had recently upgraded the IE from 6 to 7 version. After that, we are not able to co
-
Material for settlement determination within TPM
Hi gurus anybody knows which is the FM responsible to associate material for settlement in TPM? Is there any BAdI enabling to modify the logic? Thanks Carminem
-
Save metada of Business Objects locally using JCO
Hi. After retrieving the metadata of Business Objects, using JCO, (i.e. i have replicated the BAPI Explorer), I would like to save a particular Application Heirarchy Area & all Business Objects under it locally (e.g. Financial Acounting and all busin