HT4972 Update iPad 4.3.2.

How do I update to IOS 6?

Did you read the kb article that brought you to this support forum? It all explained in this.
http://support.apple.com/kb/HT4972?viewlocale=en_US&locale=en_US
You need to connect your iPad to your computer and launch iTunes and update that way. Read the article again.

Similar Messages

  • HT4972 Updating IPad operating system

    I have an early IPad (version 3.2.1 (7B405) model MB292LL), is it possible to update the operating system to IOS?

    The iPad 1 can be upgraded to 5.1.1.
    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • HT4972 Updating iPad Version 4.3.3 to iOS 6

    How can I update my iPad Version 4.3.3 to a newer IOS version 5 or 6? 

    Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
    http://i1224.photobucket.com/albums/ee374/Diavonex/a12310c6040505d18fbb03256ceb7 0de.jpg
    Note: IOS 6 is not available for Original iPad

  • HT4972 Updating IPad version 4.3.3. easy to use Upgrade Software button/website?

    Please Help me Upgrade my 4.3.3 IPad Easily & Simply My IPad is Missing Upgrade Software Button~

    You only have the option if you are already running iOS 5. If you are trying to update the iOS, you have to use iTunes on a computer to update the iPad.
    From iOS 4 or lower - Here are the instructions.
    http://support.apple.com/kb/HT4972

  • HT4972 Updating iPad software

    I am trying to update the software on my iPad and get an error that the download was corrupted every time I try. Any ideas?

    I don't have a firewall or antivirus on. Any other ideas?

  • HT4972 Update iPad to iOS 5

    Can't update my iPad to IOS 5, no update software button in my general settings.

    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • HT4972 update ipad from ios 5.1.1 to current

    My ipad denotes IOS 5.1.1 and says up to date.  How do i get latest ios to update?

    Hi,
    Sometimes you can get an app to work on an older ios like your 5.1.1. so your ipad be useful longer.
    Please read these and you might be able to use and buy older apps.
    http://www.engadget.com/2013/09/17/apple-ios-last-compatible-version-app-iphone- ipod-ipad
    http://9to5mac.com/2013/09/17/ios-app-store-now-allows-legacy-app-downloads-to-s upport-older-hardware-and-software/
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
    Hope this helps. 

  • HT4972 I want to update iPad but when I open go to settimgs and general there is no software update?  It,s an older iPad and do not recall ever updating?

    I want to update iPad 2 but it's older and do not recall ever updating. Not sure what ISO is loaded? When I go to settings and open the general there is no spot for update?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4972 How do I update iPad

    How do I update iPad 2

    Tap in the following order, settings> general> software update> download and install.

  • HT4623 update ipad with ios 4.3

    how do I update ipad with ios 4.3

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4623 how to update ipad to ios 5

    how do i update ipad 2 to ios 5

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4623 How do I update iPad version 4.0? To version 6 or whatever is higher?

    How do I update iPad version 4 to the latest software.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • How to update Ipad 2 from IOS 4.3.5 to IOS 5. Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

    how to update Ipad 2 from IOS 4.3.5 to IOS 5? Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • How do I update iPad  1 OS?

    I want to update my iPad 1 os. How?

    If you are using iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
    To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
    See here: http://support.apple.com/kb/HT4972
    The iPad 1 can be updated to iOS 5.1.1

  • No setting to update ipad

    I don't know how to update my iPad. It says to go to settings, then general, then there should be something that says update, but there isn't. Can someone help me?

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    Your iPad will be updated to iOS 6, so you will lose the built-in YouTube app and the Maps app will change.

Maybe you are looking for

  • How to change the font size of Text box tool ?

    How to change the font size of Text box tool ? I am using Acrobat PDF 6.0 Tools > Advanced Commenting > Text Box Tool I need to know how to change the font size. The default font size is too big. let me know Thanks

  • UWL Issue after Ehp4

    Hi, We recently upgraded to Ehp4. We followed the Note 1133821 and setup an RFC destination with the name SAP_ECC_Financials$WebFlowConnector and tested it. But when we re-register the UWL system (SAP_ECC_Financials), we are able to see an error mess

  • Paragraph spacing in ID cc

    I would like to know how to create spaces between paragraphs for an epub without using html or css

  • Leopard on my MacBook Pro but need Tiger for certain apps...

    I want to load Leopard onto my MacBook Pro but I need Tiger in order to run Pro Tools. I'd like to install Tiger on a 400FW external drive. Not sure how to do this and don't know if the 400 is fast enough to run the operating system. Any ideas on how

  • Printing from iPad2 (iOS5.1.1) via printserver on HP printer?

    Hi, with my MacBook Pro I can print wireless on my HP Businessjet 1200 printer without any problems. The printer is connected to a printserver and this part by wire with the WLAN router. Back to my iPad: Before iOS5 I used Airprint to print from my i