HT4974 Changing service data storage to other server with RAID
We have an mac mini server 10.7.5 and an xserve with 10.5.8. with RAID. We want to change the service data storage location from the Lion server to the RAID of the xserve (Leopard). But this share is not available in the list. Any suggestions?
Very late but these might help...I hope you've moved on from the xserve by now though: Mac Pro is a beast!
https://discussions.apple.com/thread/4704949?tstart=0
https://discussions.apple.com/thread/4244237?tstart=0
https://discussions.apple.com/message/21134374#21134374#21134374
https://discussions.apple.com/thread/4991270
Similar Messages
-
Hello is it possible to change IPTC datas whith an other photoshop CS 6 than the own?
hello is it possible to change IPTC datas whith an other photoshop CS 6 than the own?
hello is it possible to change IPTC datas whith an other photoshop CS 6 than the own?
-
Hi,
Is it possible to set up a Mac Mini Server with Raid 1 using only another mac computer such as a mac book?Yes- Colin Jeukens posted step by step instructions back a couple of months ago. Here it is again...
Out of the box the mini comes without Raid. You have two identical HDs of 500Gb.
I have just set it up as Raid1. You can't do this when you use the startup disk from the mini. And as you don't have a Superdrive ... you need to be creative. You need another Mac with Firewire.
Step 1: Start the Mini in Target Mode. Press the T during start. In a few seconds the firewire logo will appear on your screen.
Step 2: Go to your second Mac. Connect the firewire cable between second Mac and Mini.
Step 3: On the second Mac start the disc utility. The two identical drives on your mini will show. Create a new Raid set (mirrored = Raid 1). Include both drives. Confirm the warning that all data on the mini will be lost.
Step 4: Make sure your second Mac has CD/ DVD sharing option installed. This is tou use the superdrive to install OS X Server on the mini.
Step 5: Shutdown both Macs
Step 6: Start your second Mac in target mode. Make sure the firewire cable is still connected.
Step 7: Start the Mini with the option key pressed.
Step 8: Insert the OS X Server install disc in your second Mac.
Step 9: wait till the drive logo apears om the Mini. Continue the install. Will take about an hour.
Here is a link to the original post...
http://discussions.apple.com/thread.jspa?threadID=2213470&tstart=0 -
HT4974 How can I select a remote volume (NAS) as my service data storage volume?
Hi everyone,
I have been struggling with the following:
I have Mac OS X Server (the Mountain Lion add-on) running on a Mac Mini (2009). Ever since the upgrade to Mountain Lion Server (10.8.2) I have been wanting to store the Service Data on my Synology DS412+ NAS. The reasons for this are: greater storage capacity, speed (my NAS is fast) and reliability through RAID5.
The instructions provided by Apple Support point towards the Server App: go to Hardware > Server > Settings > Service Data (click Edit) and select the volume where you want to store your Service Data. However, this only lets me select the volume(s) of my Mac Mini or USB-connected volumes (if present). I would like to select a network share on my NAS, but mounted network volumes do not show up in the list.
FYI, I have connected my NAS to the LDAP service running on Mac Mini Server, so all users have access to it based on their network accounts.
I hope someone has pointers or even conclusive advice how to go about. Many thanks in advance.
JannemWorks only when the volume is mounted as iSCSI target :
http://www.synology.com/support/tutorials_show.php?q_id=468 -
How change the Date parameter based on server date
Hi,
We are using Query browser to connect to Bex Query.In BEx Query we have a date prompt which is mandatory.So by using Query prompt selector the dashboard has been created.But in our scenario the date has to be picked up from current system date/Server date and it has to change automatically when ever the dashboard has been opened.How to achieve this.
Regards,
VenkatUsing the query prompt selector, the date will be listed in the drop down box. Here you can see only the date available in the server. Use the "Insert selected items" option you can pass the current date using =today() function.
But the pain behind using the query prompt selector on date you have scroll a lot to search for a specific date, on this case i would suggest you to take the calender component to trigger the query. You have the same flexibility to pass the current date in this component. -
How to change the date path of Web Server to my system time?
Hi,
I have downloaded a Countdown SWF file from the Internet. It is working fine with the Computers which have Internet Connection. But not working without Internet connection because of the following line of code in XML file:
<PHPurl>http://www.flepstudio.org/utilita/CountDown/gettime.php</PHPurl>
When I opened the webpage using the above code, it shows time in a typical digits:
Monday, October 18, 2010 9:12:52 PM in my System -shows in Web browser like : time=1287425579
How to modify the code so that I can use my System time to work with Countdown without Internet Connection.
The following is the path from where I have downloaded the Countdown file:
http://www.flepstudio.org/forum/flepstudio-utilities/2960-flash-cs3-countdown.html
Please help me to run this countdown without internet access.
Thanks.It appears all that php file does is return a time=value variable. So you need to see where that time variable is implemented in the Flash file and assign it a value using the Date.getTime() method instead of having the PHP file get called into play. Look in the help documents or Google if you do not know how to use the Date class.
-
Hi!
I'm trying to have an analog square wave input determine where data gathered from a second analog input channel is stored. I want data to be stored to one array during the high signal period of the square wave and data to be store to another array during the low signal period of the square wave. The square wave I'm using is of constant frequency (8.3 Hz). I believe I need to use an analog input wave as opposed to a onboard clock or other timing mechanism because my square wave is also being used to modify the input going into my experimental setup. Thus the data storage needs to be correlated to the timing of the data modification in the experiment. I tried to use the retriggerable property node function, but receive error 200452, which I think means that my PXI card (6115) can't support this retriggerable function. So I'm looking for other ways to accomplish alternating data storage in response to an incoming analog square wave. Any help would be GREATLY appreciated... Thanks! (I'm also quite new with LabView so toddler-type explanations would probably be most useful )
-Shari
(LabView version 8.6)
Attachments:
Pulsed_Acq_Switch_Simplified.vi 47 KBHello Shari,
I am looking at your situation and it seems very intriguing. after downloading your file I have a couple questions to ask if you don't mind answering.
Currently in your program you are only taking one sample of data at a time, this could lead to uneven sampling. Would you like to sample at a consistent rate (say 10 Kilosamples of data a second?) if so what type of card are you using?
Also, Do you want your data to be in a 2-D array of data?
Best Wishes,
Daniel -
Is there a possibility to retreve Data from the OPC Server with the XML Interface
Is there a possibility to connect a OPC/DA server with the help of the XML interface with Labview?
I need to retrieve Data from a OPC Server running on Linux, so i got no Dcom System an I need to use XML. The server is running and with OPC client-tools i can access de different data. So now I want to visualize all Data
that come from that server on Labview.
1. Is it possible to realize that?
2. Is a library or a demo vi available ?
Regards
DenselHi Densel,
Sure, you can use XML within LabVIEW, the question is which syntax do you use?
Are you able to send the XML statements via TCP/IP?
Regards, Christian -
Steps to clone database in other server with restore daily
Hi,
I think i know what is the steps but need a guru that give me the ok.
I have been asked to perform a clone database (11.2.0.3 with ASM) in another server. The original database (call PROD) has full backup everyday that it automatically (with crontab and a script i guess) restore the second database. The problem i see its that the original database is a RAC (2 nodes) but the second database is standalone (call TEST)
I think the steps are:
1) create a standalone database in second server with same number of diskgroups and same directories
2) copy full backup to TEST server.
3) duplicate with rman:
connect auxiliary sys/password@TEST
connect target /
startup auxiliary nomount;
run {
allocate auxiliary channel ch1 type disk;
duplicate target database to 'TEST' nofilenamecheck;
release channel ch1;
4) copy PFILE from PROD and modify (like standalone database) at TEST
5) startup nomount; --test database
6) restore controlfile from '< backup piece name of controlfile auto backup copied in step 2>'; --at test database
7) alter database mount; --test database
8) recover, restore from full backup and open database-->
run {
allocate channel d1 device type disk format ' <path of the copied backup in step 2 >';
set until sequence < sequence> thread < thread# >;
restore database;
recover database;
SQL> alter database open resetlogs;
9) like its a backup that has 2 undo tablespaces, should i drop 1?:
SQL> drop tablespace UNDOTBS2 including contents and datafiles;
All this steps at first time, are they right?, to do it automatically in the script i should use 2) 5) 6) 7) 8)?
-- like the databases names are different, should i have any problem when restore de controlfile? if yes, how to avoid it?
Thanks in advance and sorry for the inconveniences
Edited by: Me_101 on 30-jul-2012 5:46Me_101 wrote:
Hi,
I think i know what is the steps but need a guru that give me the ok.
I have been asked to perform a clone database (11.2.0.3 with ASM) in another server. The original database (call PROD) has full backup everyday that it automatically (with crontab and a script i guess)Why guess? Can't you look at the crontab schedule and see for yourself?
restore the second database. The problem i see its that the original database is a RAC (2 nodes) but the second database is standalone (call TEST)
That should not be an issue. Even with RAC there is still only a single database to duplicate.
I think the steps are:
1) create a standalone database in second server with same number of diskgroups and same directories
2) copy full backup to TEST server.
3) duplicate with rman:
connect auxiliary sys/password@TEST
connect target /
startup auxiliary nomount;
run {
allocate auxiliary channel ch1 type disk;
duplicate target database to 'TEST' nofilenamecheck;
release channel ch1;
4) copy PFILE from PROD and modify (like standalone database) at TEST
5) startup nomount; --test database
6) restore controlfile from '< backup piece name of controlfile auto backup copied in step 2>'; --at test database
7) alter database mount; --test database
8) recover, restore from full backup and open database-->
run {
allocate channel d1 device type disk format ' <path of the copied backup in step 2 >';
set until sequence < sequence> thread < thread# >;
restore database;
recover database;
SQL> alter database open resetlogs;
9) like its a backup that has 2 undo tablespaces, should i drop 1?:
SQL> drop tablespace UNDOTBS2 including contents and datafiles;
All this steps at first time, are they right?, to do it automatically in the script i should use 2) 5) 6) 7) 8)?
-- like the databases names are different, should i have any problem when restore de controlfile? if yes, how to avoid it?
Thanks in advance and sorry for the inconveniences
Edited by: Me_101 on 30-jul-2012 5:46Take a look at the DUPLICATE DATABASE command in rman. Key is to connect to the production db as target, duplicate databse as auxiliary
connect catalog rman/cat@rmcat
connect target sys/pswd@proddb
connect auxiliary /
run {
duplicate target database to NEWDBSID;
} where NEWDBSID is the name of the new database
Put together what you think is the correct procedure and give it a shot. If you have specific problems, bring them to the forum. -
Plotting 2 Columns of Data Against Each Other, Not With Time
I have several data columns, one with current, one with voltage, one with time. I am trying to make and IV curve, plotting the current and voltage against each other, preferably with the voltage as the Y axis and current as the X axis. However, every time
I try to select the two columns and scatterplot them, excel automatically makes it either a stacked graph of current with time and voltage with time, or just gives me voltage with time. How do I get excel to simply graph the two columns that I select?Try the following:
If you have a chart with 2 series V and I both plotted on the Y axis, against 1, 2, 3, ...:
Select the chart.
On the Design tab of the ribbon, click Select Data.
Select one of the two series (it doesn't matter which).
Click Edit.
Select the text displayed in the 'Series Y values' box, and copy it (Ctrl+C).
Click Cancel.
With the same series still selected, click Remove.
Select the remaining series, then click Edit.
Click in the 'Series X values' box, then paste (Ctrl+V).
Click OK, then OK again.
If you have a chart with only one series (either V or I) plotted against 1, 2, 3, ...:
Select the chart.
On the Design tab of the ribbon, click Select Data.
Select the series.
Click Edit.
If there is anything in the 'Series X values' box, clear it.
With this box still selected, use the mouse to select the data range of cells for the other quantity you want to plot.
Click OK, then OK again.
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
G4 Mac OSX 10.4 server with RAID & sharepoints - Intel Xserve & RAID?
Hey all,
so we need to migrate our G4 Power Mac running Mac OSX 10.4 server with about 60 user accounts and a RAID with about 50 sharepoints to a brand new Intel Xserve with 10.4 server and a brand new RAID.
My plan for the server part of things is to put the new server online with the old one still running, make the new one a replica of the old one, then take the old one offline and promote the new one to a master.
But what to do about the sharepoints and several terabytes of data? Is there any way to do this except manually copying the data and re-creating all the sharepoints? That wouldn't be the complete end of the world as long as all the accounts/groups come across via the replication, but it'd be nice if there's a smart way to do this.
Thanks for your help!Never tried the replica promote so I can't say that it will work. The way I migrated from 10.4 to new hardware 10.4 server was to set the new server up with exactly the same setup, DNS, IP and so on. This requires the old server be off the network for a bit. Once it was running I would have a backup of the LDAP/OD info made directly from the old server in Server Admin. Import this on the new server and all users and passwords are back in place. Now as for the share points and the data the best thing to do is to attach the old RAID to the new unit first. Hopefully you have a way to have both RAIDs connected at the same time to the new unit since that would be best.
In the interest of downtime you could immediately add the share points back in to WGM pointing to the old RAID drives. This gives you the free time to migrated the data when you want to. Make sure you know the right settings for each protocols which you use for each share point (AFP, SMB, FTP, NFS).
Now that your up and running you can move data by whatever means you see fit to the new RAID keeping in mind you want to keep permissions in-tacked. There are many clone or sync option out there and you don't need to move all the share points at once.
The main reason I chose this method is it offers a fall back and no client reconfiguring. If something is not working on the new server you can simply plug the old RAID back to the old server and your up. Second is that if you try to run both server at the same time you would need to create a whole new identity for the new server (IP, DNS and so on). Migrate data via a Network (very slow) and reconfigure all clients to point at the new server. I've done this at least 10+ times at different locations and even before the easy 10.4 backup of LDAP/OD info. Making sure you had a clean LDAP was never so easy. All swap outs took less then an hour of down time with maybe 2 hour pre-swap setup. Data movement to a new RAID was not always the case but by using this method you can move data later which is the most time consuming process of the whole swap. -
Is there a place I can see how much data I uploaded other server like the old version of Sync did?
In the old version of Firefox Sync you can see what data was uploaded, with the next Sync I see nothing and when I got my account on the website Firefox, I don't see nothing just a sign in and change password screen. Would there be more there soon?
Hi Kurbo,
Please do leave feedback for the developers at input.mozilla.org, currently there is not a feature that shows how much data or what data is uploaded.
However if you are handy at picking up apis there are some apis that can be read about [https://blog.mozilla.org/services/2014/05/08/firefox-accounts-sync-1-5-and-self-hosting/ here] -
S6 IPSec Service Data Storage and WiFi Calling
Hi,
Can any other S6 owners tell me the storage size of the IPSec Service application.
Then can you tell me if you have wifi calling enabled.
I am getting the run around between EE and Samsung as I think there is a data leak in the wifi calling.
My IPSec Service application is taking up 5.16GB and there is no way to clean this other than a phone reset.
Cheers
IanI have the same issue. Only 1.6gb though. I heard this is some sort of memory leak and 5.1.1 should fix this issue. But being EE and a Samsung device, who knows when the update will arrive!
-
Windows Search Service Best Pratices on RDP Server with office 2013
high everybody,
i´m looking for guide how to configure the Windows Search Service on our Server 2012 RDS Servers. The Servers have Office 2013 installed so turning off the Search Service is not an Option. We are using User Profile disks and logoff was getting slower
as time goes by. Reading in another thread if have deleted the Subkeys under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\CrawlScopeManager\Windows\SystemIndex\DefaultRules
and restarted the Search Service.
This Resulted in a lighning fast logoff ( less then 5 Seconds) before that logoff took up to 2 Minutes. Looking at the Reg Key´s i found that underneth the mentioned Key there was a subkey for each user that has EVER loged on to this Server. Normal load
should be about 30 Users and i found about 700 subkey´s. To it seems that this causes the Search Service searchindexer.exe to read thru all this key´s witch i think is not the Problem ( Internet Explorer does far more reads and writes) but what happens
with the Information.
Maybe it has to to with the fact, that we are using User Profile Disks ?
In the Search Service Policy i have excluded "C:","users homedrive" and the Share where the Users share theyr data, for the Search Service to exclude.
So does anybode have experience with Seach Service on RDS Servers with Office maybe with User Profile Disks ?
Thanks ReinerHi Reiner,
You can check the following article might helpful to resolve your case.
Incomplete search results may occur in Outlook when a PDF iFilter is installed
http://support.microsoft.com/kb/2925203/en-us
Also try uninstalling office 2013 application and then reinstall by running change user /install command in elevated command prompt on RDS server prior to install software's. Post software installation you need to run
change user /execute command on server
http://technet.microsoft.com/en-us/library/cc742815.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to change the data provider of the tree with the selection of combobox
This is my XML data in a file named `nodesAndStuff.xml`.
<?xml version="1.0" encoding="utf-8"?>
<root>
<node label="One" />
<node label="Two" />
<node label="Three" />
<node label="Four" />
<node label="Five" />
<node label="Six" />
<node label="Seven" />
<node label="Eight" />
<node label="Nine" />
</root>
The component using this data source is an `XMLListCollection` which is bound to a spark `ComboBox` and the code for that is:
<s:Application name="Spark_List_dataProvider_XML_test"
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/halo"
initialize="init();">
<fx:Script>
<![CDATA[
private function init():void {
xmlListColl.source = nodes.children();
private function closeHandler(event:Event):void {
myLabel.text = "You selected: " + ComboBox(event.target).selectedItem.label; myData.text = "Data: " + ComboBox(event.target).selectedItem.data;
]]>
</fx:Script>
<fx:Declarations>
<fx:XML id="nodes" source="nodesAndStuff.xml" />
</fx:Declarations>
<mx:ComboBox id="cmbList" dataProvider="{ListXLC}" labelField="STOREVALUE" close="closeHandler(event);"/>
<s:dataProvider>
<s:XMLListCollection id="xmlListColl" />
</s:dataProvider>
</mx:ComboBox>
<mx:VBox width="250" color="0x000000">
<mx:Text width="200" color="blue" text="Select a type of credit card."/>
<mx:Label id="myLabel" text="You selected:"/>
<mx:Label id="myData" text="Data:"/>
</mx:VBox>
<mx:Tree id="myTree" width="50%" height="100%" visible="false" />
</s:Application>
now another of my xml for example this is one.xml
<?xml version="1.0" encoding="utf-8"?>
<root>
<node label="Eleven" />
<node label="Twelve" />
<node label="Thirteen" />
<node label="Fourteen" />
<node label="Fifteen" />
<node label="Sixteen" />
<node label="Seventeen" />
<node label="Eightteen" />
<node label="Nineteen" />
</root>
and another one is two.xml
<?xml version="1.0" encoding="utf-8"?>
<root>
<node label="twety one" />
<node label="twety two" />
<node label="twety three" />
<node label="twety four" />
<node label="twety five" />
<node label="twety six" />
<node label="twety seven" />
<node label="twety eight" />
<node label="twety nine" />
</root>
Now I have added my tree just below the list and I have saved counting from 10 to 19 in `one.xml`, 20 to 29 in `two.xml` and so on in different XML file. I have no clue how to connect the XML containing counting from 10 to 19 as the single node in tree at the selection of label one in list and make its visiblity true.this all are dependent on combobox as on selection of item in combobox will lead to change the dataprovider of tree at runtime. i.e on selecting value one in combobox one.xml should be the data provider for tree control. Can anyone help me on thisThis is my XML data in a file named `nodesAndStuff.xml`.
<?xml version="1.0" encoding="utf-8"?>
<root>
<node label="One" />
<node label="Two" />
<node label="Three" />
<node label="Four" />
<node label="Five" />
<node label="Six" />
<node label="Seven" />
<node label="Eight" />
<node label="Nine" />
</root>
The component using this data source is an `XMLListCollection` which is bound to a spark `ComboBox` and the code for that is:
<s:Application name="Spark_List_dataProvider_XML_test"
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/halo"
initialize="init();">
<fx:Script>
<![CDATA[
private function init():void {
xmlListColl.source = nodes.children();
private function closeHandler(event:Event):void {
myLabel.text = "You selected: " + ComboBox(event.target).selectedItem.label; myData.text = "Data: " + ComboBox(event.target).selectedItem.data;
]]>
</fx:Script>
<fx:Declarations>
<fx:XML id="nodes" source="nodesAndStuff.xml" />
</fx:Declarations>
<mx:ComboBox id="cmbList" dataProvider="{ListXLC}" labelField="STOREVALUE" close="closeHandler(event);"/>
<s:dataProvider>
<s:XMLListCollection id="xmlListColl" />
</s:dataProvider>
</mx:ComboBox>
<mx:VBox width="250" color="0x000000">
<mx:Text width="200" color="blue" text="Select a type of credit card."/>
<mx:Label id="myLabel" text="You selected:"/>
<mx:Label id="myData" text="Data:"/>
</mx:VBox>
<mx:Tree id="myTree" width="50%" height="100%" visible="false" />
</s:Application>
now another of my xml for example this is one.xml
<?xml version="1.0" encoding="utf-8"?>
<root>
<node label="Eleven" />
<node label="Twelve" />
<node label="Thirteen" />
<node label="Fourteen" />
<node label="Fifteen" />
<node label="Sixteen" />
<node label="Seventeen" />
<node label="Eightteen" />
<node label="Nineteen" />
</root>
and another one is two.xml
<?xml version="1.0" encoding="utf-8"?>
<root>
<node label="twety one" />
<node label="twety two" />
<node label="twety three" />
<node label="twety four" />
<node label="twety five" />
<node label="twety six" />
<node label="twety seven" />
<node label="twety eight" />
<node label="twety nine" />
</root>
Now I have added my tree just below the list and I have saved counting from 10 to 19 in `one.xml`, 20 to 29 in `two.xml` and so on in different XML file. I have no clue how to connect the XML containing counting from 10 to 19 as the single node in tree at the selection of label one in list and make its visiblity true.this all are dependent on combobox as on selection of item in combobox will lead to change the dataprovider of tree at runtime. i.e on selecting value one in combobox one.xml should be the data provider for tree control. Can anyone help me on this
Maybe you are looking for
-
Camera roll has gone behind the "Albums" title bar. How do I get it back?
My camera roll album has gon behind the "Albums" title bar. I cannot now access my photos. How do I get it back to its normal position? I have tried syncing.
-
How can I 'unlock' non editable adjustments in layers
I have downloaded a nice free flyer psd template, which I need and should be able to adjust. But I cannot edit any of the layers. They appear to have a folder structure and have it says 'non-editable adjustments'when I hoover over the pencil. I someh
-
GM Resource Related Billing based on Cash
Hi Folks, I'm relatively new to SAP and my users have asked for a modification to the billing process for NIH and NSF grants(letter of credit). Right now they are drawing down based on expenditures, but would like to change so it's based on cash disb
-
Why cant I get Adobe flash player on My tablet when I Can get Adobe for Android.
I am having no success in downloading adobe flash player to my tablet. I already have adobe player but seem unable to get flash player. How do I get it?
-
Hi all, When i have run the query ,I am geting the unknown device event instead of actual device....what would be problem.