HT4990 I cannot place a Card order whilst on holiday in Spain (home is UK).

Cannot connect to the Store, apparently.
I wonder if the app is designed this way, to only permit orders when placed in domestic territory.
Anyone else tried/found this?

I used a UK SIMM card in mine when in the UK. When I got back to Sydney I just removed it and put my Telstra SIMM back in. It found the Telstra network and all was well. I'm not sure how it could block your iPad if its not in the iPad when you get home.

Similar Messages

Accidentally purchased roaming data whilst on holiday

Hi,
I was browsing the data options whilst I am holiday in Spain and as I was scrolling through I accidentally pressed the buy button which is located incredibly close to the area I was scrolling at.
As there was no confirmation I wasn't able to cancel it before the purchase had gone through which is completely ridiculous considering it was £25 for 500mb that I don't even want or need!
Not to mention that the service for this data package out here is completely unusable anyway as simple Web pages can't even finish loading!
I'd like a refund if possible and the removal of the data from my account as I don't even want it!

Hi , Welcome to the EE Community. Funnily enough, I did exactly the same thing as you whilst on holiday in Spain (hope you're enjoying it)! Whilst I bought a cheaper package, I too was surprised at the lack of proper confirmation (I had somehow purchased it whilst my phone was in my pocket). I got onto EE via Twitter and spoke to their Live Chat team. I basically said I'm not looking for a refund, but suggested they add an additional layer of protection before allowing a purchase of over £10, which could be the CVV number on the card or the password linked to your EE account, or even clicking on a link in an SMS message. I don't think they'll be able to refund this for you, but hopefully they'll begin to add measures to help prevent accidental purchases. If you have Twitter, you can try tweeting them @EE and they may be able to advise further. Good luck, and try and focus on enjoying your holiday! Cheers,
Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

I can get into a website but cannot place orders on websites

I am unable to place orders on websites such as gap, the limited, etc. I can get into the site and bring up what I want to order, but when I go to click on "add to shopping cart," it will not go into the cart, therefore, I cannot place an order.

Such a "add to shopping cart" button usually involves to create a cookie to store the ordered articles.<br />
If that doesn't work then make sure that you are allowing cookies for that website (they may be using multiple domains).
*http://kb.mozillazine.org/Cookies
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Can I place a multiple card order using different cards?

Can I place a multiple card order using different cards eg personalising Christmas cards for family and friends, but ordering them on the one order?

No.
Regards
TD

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

After upgrading to MAC OS X 10.10.2 Lightroom 5 has an error that it cannot read the card when trying to import photos. The card is fine as I can import into iPhoto so any ideas?

After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing. The card is fine as I can import into iPhoto - any ideas?

It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
Library >> Preferences
clear everything relating to LR5 which usually means deleting the following files:
com.adobe.Lightroom5.plist
com.adobe.Lightroom5LSSharedFileList.plist
Then re-launch Lightroom.

Cannot place calls after 2.2 update

Today I downloaded and installed the iTunes update, then did the iPhone 2.2 update. Now I cannot place calls with my phone. I can receive calls and all other functions work ok.
I powered off and restarted the phone. No luck.
I reset the phone. No luck.
I went to AT&T and had my SIM card replaced. No luck.
I restored the phone to factory settings. No luck.
I restored the phone from my last backup. No luck.
Any suggestions?
Thanks!

3G
When I press the green Call button it immediately says the call failed.
AT&T verified that my account was in good standing and had no billing/administrative issues. They then replaced my SIM card. Honestly, I didn't trust the AT&T store to do tech-support on the iPhone. Since there was an Apple store about 100 yards away, I went there next.
At the Genius Bar, the man said that there had been some "voltage issues" from updating via a laptop. He said that I should restore it to factory settings, then try again, but this time from a desktop. I tried that, but still, no luck.
It seems odd that I can receive calls, but not place them.

Credit card orders through B1

Hi,
We have had this dilemma for a while and looking for suggestions/recommendations. Typically our orders are Net 30 in which a PO is issued. However, many times we cannot use Net 30 and end up ordering using credit card. The problem is that credit card orders are not payable to the vendor (i.e., Amazon) but to the credit card company. Therefore it becomes a nightmare to reconcile. The transaction cannot be "closed" (based on what I have heard). We have setup a "generic" business partner for credit card orders, just so there is some tracking upon receipt of the items. It is important for our shipping folks to know that the item has come in and dispatch it to the correct department.
B1 is not very flexible in terms of credit card orders.
I will be happy to clarify, if you have further questions. Your thoughts/suggestions are appreciated!

Anyone?

Credit card Orders are getting blocked with credit check

Hi All
In our system, If customer's credit exposure is greater then 100 % then all the credit card orders are getting blocked with credit check even though it has valid authorization. Is this sap standard behaviour?....is there any setting that will always exclude credit card orders when it has valid authorization
Thanks in advance for looking into this

Hi,
In OVA8- under document controlling- check the existing routinue 1 for orders etc., else modify as per your requirement
Thanks
Chidamabram

Payment Card Order completely invoiced but in the order is still showing Overall Status as Blocked

Payment Card Order completely invoiced but in the order is still showing Overall Status as Blocked

Share the screen shot of payment card tab from that sale order. Also what values are flowing in Status tab.
G. Lakshmipathi

HT1925 I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes

I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes. Is there any other way I can accomplish an upgrade without using the Itunes.msi file?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cannot place photoshop PSD file

When I try to place a PSD file into Muse I get the following message:
Cannot place file named 'logo.psd'.
Image was saved with Compatibility Mode turned off. Try re-saving in Photoshop with Compatibility Mode enabled before importing.
I'm using a fresh install of Photoshop CS5 with latest updates. When I save my file I get the compatibility mode confirmation box and the option is checked to enable compatibility mode. This happens in 32 and 64 bit versions. If I create a new image and save it I seem to be able to place it in Muse, the problem seems to only be with PSD files originally created on another computer.

Bearfaced,
Not sure how to fix this exact issue, but as a workaround you could always:
Open the .psd in Photoshop
Save as another file type (i.e .png)
Within Muse, File, place the .png
Should give the same result unless I'm missing something, hope this helps
Shaun

I cannot place a title in iMovie11

I cannot place any titles in iMovie11 on a separate background in between two fragments. I only can drag a title on top of a fragment.
Does anyone know?
Thanks!

I solved the problem today. Aside form not being able to place a photo, I lost my projects when quitting iMovie. So I removed the folder iMovie Projects an by starting up iMovie a new folder was made and that solved both problems. But thanks anyway!
Geert

Cannot place sub-vi on diagram

I recently changed my monitor from a 24" flat screen TV to a 19" traditional flat panel LCD PL1910M, now I cannot place any sub vi's on the block diagram, whether they are things I wrote or from the examples directory. I select it and then nothing happens when normally it would appear and you could place it where you wanted. My system has worked for years without issue, this is a real problem! Anyone have advice please chime in.
Windows 7 32bit
Labview 2011 FDS
Solved!
Go to Solution.

JCS5920 wrote:
I can place any of the native functions on the diagram, it is when I got to select VI and browse to an LLB and pick something from inside the LLB.
OK, that's a much more specific problem than originally described where you said: "... now I cannot place any sub vi's on the block diagram". So it is specific to llbs. Can you open the sub VI by double-clicking it in the llb and then drag it's icon to the original VI?
Are the VIs in the llb a similar LabVIEW version?
(I would still try to temporarily disable the antivirus and see if it makes a difference. ***** updates occur often, could be an interference with a new signature)
LabVIEW Champion . Do more with less code and in less time .

Cannot place a two-channel spot color image in ID CS2

I have a psd file that consists of two pantone spot channels. When I try to place it in indesign, it says
"Cannot place this file. No filter found for requested operation."
Why is this, is there any help? I have to find a way around it, I need to make a publication using only black and a shade of pantone green.
I'm on Indesign CS2, Photoshop is CS4 and I'm on Mac OSX.

PSD. I don't have much other choice in photoshop, it offers only psd formats once the file is in multichannel mode. Maybe I'm doing something wrong in photoshop?
Basically I have a photo which is originally in 4 channel CMYK. But I need to convert it two tones only, black and pantone 363 M (or some similar green). What I did was that I deleted the C and M channel and turned Y into pantone. By doing so the image automatically switched from CMYK to Multichannel mode and wouldn't let me choose any other. I don't know if that's the right way to do it?

HT4990 I cannot place a Card order whilst on holiday in Spain (home is UK).

Similar Messages

Maybe you are looking for