HT4993 DEBUG MESSAGE WDT TIMEOUT

hello my iphone 4s will shut off and restart on its own i have done a restore and all the common tricks. i get a debug message of wdt timeout.Is anyone that can help me? My screen is cracked but I dont think thats the problem.

really?
very bad, I hope to be able to reset the phone because
when I connect it to the computer restarts every 10 seconds.
if I do not have other choices ...
Thanks for all!

Similar Messages

My iPod 4 (2010) randomly reboots after 5.1.1 upgade to iOS6 (WDT timeout).

My iPod 4 (2010) randomly reboots after 5.1.1 upgrade to iOS6 (WDT timeout).
After reboot I cannot power it with Power Button. Have to do Power + Mac, hold to 10 sec and than it will go ON. After 1 minute when it will go to sleep it will start randomly reboots.
Diagnostics & Usage Data log is shoving multiple "panic" error with Debug message "WDT timeout".
Any Advice what is wrong? With 5.1.1 it was running like charm.
Very disappointing.

Try the following:
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

3GS randomly reboots after 5.0.1 (WDT timeout)

Hi all,
I have since a few months a 3GS which was in 4.x, and never had any problem of any kind.
I upgraded to 5.0.0 when this released was issued, no problems while upgrading, and although I noticed my battery lasted less, I had no major issue.
When 5.0.1 was released, I was happy to notice it addressed some battery issues, so I quickly updated my 3GS.
Since the first 5.0.1 I experienced 3 to 5 minutes constant hard reboots, ie after 3 to 5 minutes, even while doing nothing, the iphone powersoff and on (apple logo) and reboots, forever. (battery charge was >85%)
If I removed the sim, or put the phone in airplane mode, the reboots disappear.
I then tried a restore from iTunes, thinking an app may be the problem, and after the restore, I had no single reboot ... for 3 days !
One afternoon, It started rebooting every 1 to 1h30 hours...it did so 5 times that day. And after these 5 times, no single reboot for 3 another days.
Last night, to try some battery tests, I let it drop to 5% battery charge, and switched off, then switched on. Since then, 3 minutes systematic reboots.
I had to put it on airplane mode to prevent this.
I noticed the reboot always causes a "panic.plist" log in the event logs, which error is a WDT timeout (the log enumerates tens of processes and is truncated...)
The number of applications in use at the moment is not changing the behaviour, I can have 20 open apps or nothing, the phone reboots.
I'll try another restore, but seems a weird issue, with the carrier or when the phone tries to hangup on a cell..
If someone has any clue ?..

I also having exactly the same problem as what you described (panic with wdt timeout....) The reboot seems to be random. Airplane mode with wifi on is okay (no reboot).
However, I noticed I have this problem 2 days ago while I still using ios 5.0. Then I install 5.0.1 and restore my data from icloud backup. I did not get any reboot while the phone slowly restore my 1000+ photos from icloud until it completed 900+ photos. Then it start to crash again and again and again. Now, I swtiched to airplane mode and it seems to be okay. However, we should be able to make/receive a call with iphone, right? It's not ipod touch.
I'm from Thailand. Carrier is AIS. Nothing to do with Orange. My phone is 3gs unlock.

Is there an easy way to suppress debug messages from plugin.jar?

When using the plugin.jar library (included in JRE 1.4.2 and 1.5)
my Java Console is riddled with tons of debug messages like:
<<< ProxyClassLoader: defined LiveConnectProxy class. >>>
<<< Here're the permissions you've got: >>>
<<< java.security.Permissions@b614d0 (
(java.net.SocketPermission 127.0.0.1 connect,accept,resolve)
)I'm using the plugin.jar (replacing use of the old netscape.jar)
to bridge communication between Java Applets and JavaScript.
Each time the Applet calls back to the JavaScript side,
the callback JavaScript function makes a call to parseInt() to
convert one of the parameters passed from a string to an integer.
Each time parseInt() is called, the message above appears
in the Java Console.
I traced down the source code for this message to a debug()
statement inside the plugin.jar's class loader, but I'm not sure
how to suppress it easily.
Does anyone have any ideas I could try?
Here's the code from the Java-side:
synchronized( this )
     try
          final JSObject window = JSObject.getWindow( applet );
          if( window != null )
               final String[] stringArgs = new String[3];
               stringArgs[0] = labelName;
               stringArgs[1] = labelDisplayName;
               stringArgs[2] = labelValue;
               log.debug(stringArgs[0]);
               log.debug(stringArgs[1]);
               log.debug(stringArgs[2]);
               window.call("MyJavascriptCallback", stringArgs);
          else
               log.error("Javascript window unavailable.");
     catch( final JSException e )
          // Note: Occasionally, getWindow() will throw an exception
          // without any meaningful reason.
          // ( http://www.raditha.com/blog/archives/000938.html )
          // Possible cause: This can send updates at a fraction of a
          // second. This may be causing issues within the Plugin.jar
          // used to handle the JavaScript callback.
          log.debug("JSException", e);
}

Here's what I've found out...
The messages are coming from the MRJPlugin.jar provided by Firefox.
Within the netscape.oji.ProxyClassLoaderFactory class,
the following line...
System.out.println("<<< " + message + " >>>");
...appears to be the cause and cannot be turned off by a configuration setting.
The home URL for the MRJPlugin.jar is:
http://www.mozilla.org/oji/MRJPlugin.html
The last time this library had an update released was in 10/31/2000.
However, this is the Mozilla source; not Firefox.
Although changing the MRJPlugin.jar source to remove this line will appear
to fix the problem, I'm not sure of the best way to distribute the updated
MRJPlugin.jar without conflicting with Firefox's update process.
Any thoughts?

Debug messages in Stored Procedure

is it possible to see the debug messages written in the Stored Procedure when invoking it from WLS.
using wls 8.1 SP3
DB :Sybase
Driver : weblogic.jdbc.sybase.SybaseDriver
setting debug parameters (
-Dweblogic.Debug=weblogic.JDBCConn,weblogic.JDBCSQL,weblogic.JTAJDBC
)is not enough. also using P6Spy does not help here ...

Yuval Avni wrote:
is it possible to see the debug messages written in the Stored Procedure when invoking it from WLS.
using wls 8.1 SP3
DB :Sybase
Driver : weblogic.jdbc.sybase.SybaseDriver
setting debug parameters (
-Dweblogic.Debug=weblogic.JDBCConn,weblogic.JDBCSQL,weblogic.JTAJDBC
)is not enough. also using P6Spy does not help here ...Hi. If/when Sybase sends informational messages to the client, a driver will typically
make them available from the statement or connection or even result set via SQLWarnings.
Try the getWarnings() methods of those objects.
Joe

Error when sending message: 500 Timeout

while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.

Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini

How to insert debug messages in a report

All,
I am facing a problem with one report in apps environment.
When I run the sql in toad or when I run the report from reports
builder I am getting data. But, when I run the same report using
concurrent program I am not getting any data for the same inputs.
I am not sure what is wrong. I want to put some debug messages.
Can you please tell me how to put debug messages in reports?
Thanks.

973508 wrote:
All,
I am facing a problem with one report in apps environment.
When I run the sql in toad or when I run the report from reports
builder I am getting data. But, when I run the same report using
concurrent program I am not getting any data for the same inputs.
I am not sure what is wrong. I want to put some debug messages.
Can you please tell me how to put debug messages in reports?
Thanks.Please post the details of the application release, database version and OS.
What is the type of the report?
Please see the following docs to enable debug/trace.
How Can Trace and Debug Be Turned On For A Concurrent Request? [ID 759389.1]
How To Trace a Concurrent Request And Generate TKPROF File [ID 453527.1]
Thanks,
Hussein

Debug messages in log4j

Hello,
I'm using log4j and JBoss and I'm getting a large number of debug statements in my log file. Does anyone know how to disable these debug statements?
Thanks in advance,
Ger

Just today I went through the same horrible ordeal.
A couple notes about the default JBoss log4j.xml file it seems to affect the logging somewhat, from my understanding you SHOULD do this:
The <root> category should have a priority added:
<root>
<priority value="WARN" />
<appender-ref ref="CONSOLE"/>
<appender-ref ref="FILE"/>
</root>
That should set the default root category to only display WARNING messages. There's another category (name="org.jboss.resource.connectionmanager.JBossManagedConnectionPool") with priority set to TRACE. Change that to WARN or ERROR.
I set up my own server directory structure and left out the log4j.jar from the lib directory, so it hadn't been actually reading the XML file. Just something to watch out for.
Another thing I found was that the bin/run.jar has a log4j.properties file with rootCategory=DEBUG which generates the boot.log file. I un-jarred the file and set that to INFO, then re-jarred it... I couldn't get rid of all the DEBUG messages without doing so.

Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". Has anyone else seen this?

Captivate 8: Getting this message "Unable to locate LMS's API, content may not play properly". Then I get a debug message of "44:Tue Feb 17 2015 : InIsLoaded, returning false". I also see a message in the preview pane when I view the .htm file in the project folder "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." JavaScript is already enabled and I'm getting this in IE9 and Chrome 40....Has anyone else seen this?

The first part of your issue will be resolved if you load your course from an LMS. If you are not hosting your content on LMS, you can disable the reporting in your Quiz settings (Edit > Preferences > Quiz > Reporting).
Not sure about the Javascript related issues.
Sreekanth

Debug Messages missing in Forms 9i?

When running a form from forms designer with debug messages checked I don't get a message displaying the trigger name, I only get a Please Acknowledge Message alert box.
Is there a setting that I may have inadvertently set that would prevent the messages from being displayed?
Forms version 9.0.2.12.2.
Thanks
Richard
P.S. We have just started to assess Forms 10g (9.0.4) for Windows and have noticed huge improvements in performance - about 50%! Don't know what you guys have done but initial impressions are excellent. We are looking to roll this out to production as soon as possible.

The problem with debug messages is a known one (Bug 3376171) and will be fixed in forms 10. (not 10g - 9.0.4)

How to turn off DEBUG message in Jdeveloper 9.0.3

Folks,
When I upgraded my Jdeveloper from 9.0.3 Preview version to formal release, it takes 5 minutes to load the first jsp page which used to take less than 1 minute. One reason I can think of is that all the DEBUG messages are showing up now and printing out those messages could take minutes. I can not find the way to turn off those DEBUG message. Please help.
Thanks,
Yibing

There should be no diagnostic messages from BC4J by default.
Adding the Java VM parameter -Djbo.debugoutput=console sets the jbo.debugoutput system property to the value console and makes the messages appear.
Double-check that you don't have this set in your "Runner" panel.

Returned message login timeout expired linked server

OLE DB provider "SQLNCLI" for linked server "SERVER" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "SERVER" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default
settings SQL Server does not allow remote connections.".
Msg 53, Level 16, State 1, Line 0
Named Pipes Provider: Could not open a connection to SQL Server [53].

Hi Lukesh,
According to your description, you cannot connect to one of your linked servers with the error "Login timeout expired", right?
If in this case, please follow the troubleshooting methods below on the linked server.
Select "Using both TCP/IP and named pipes" in SQL Server 2005 Surface Area Configuration.
In SQL Server Configuration Manager, make sure that TCP/IP is enabled for the Network protocol.
If you turn on the Firewall, make sure the TCP port 1433 is in the Firewall exception list.
Reference
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
If the issue persists, please provide us more information, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

NO MORE DEBUG MESSAGES!

it is kind of hard to stay in the forum rules, specially the
insults part (is inept or negligent allowed by forum rules?), on
how i feel right now. why somebody in adobe thinks that a final
user cares about debug messages? i am using firefox i have many
tabs open, i am watching whatever and all the tabs get blocked
because somebody thinks is the job of the final user to debug
something he/she didnt make, specially the 'select code location',
which code?, so i keep getting a popup asking where to debug (if
local or to place the id of the code to debug). there are pages
that are so hard to watch because of this, are the adobe people so
(...)... ARGHHHHH!!!.. i keep disabling flash player because of
this, i only turn it on to rate songs in yahoo launchcast or watch
youtube videos or a few more pages, then i forget to disable it and
the problems begin ('something' reminds me to turn it off again),
if there is one of those popups asking the location of the code to
debug and disable the player without closing this message, adobe
offers me a nice browser crash. are they stupid or is the final
user the debug monkey for their products?, i mean, is not like it
does not happen all the time (either firefox or explorer), they see
by themselves something is just plain wrong, but does somebody else
has to tell them, yes it is wrong even tough you see it by
yourselves, please make it right? i mean, fix that stupid thing
once and for all, why do we care about debug code we didnt even
made ourselves, talk about 'user experience'

Originally posted by: cap_nemesis.hotmail.com
if there are more than one log4j.properties on different levels (server,
webapp) things can get confusing :-)
"Mark Daring" <[email protected]> schrieb im Newsbeitrag
news:drgpe7$1o0$[email protected]..
> How can I change the tomcat logging level, so no more messages like:
> "DEBUG [ContainerBackgroundProcessor[StandardEngine[Catalina]]]
> (ManagerBase.java:653) - Start expire sessions StandardManager at ..." are
> sent to the console?
>
>

Display debugging message in jboss environment

Hi every body,
I am trying to plot a graph using jfreechart on jsp page. I want to debug because I fount the class cast exception error.
Can you tell me please that how can I dispaly debugging message using jboss environment.
Where can I look this message.
public Log logger=LogFactory.getLog(this.getClass());
logger.debug("Before calling pageno");
Thanks and best regards

Perhaps you have to look at Log4J: [http://logging.apache.org/guidelines.html].
The standard log directory should be: jboss-4.2.1.GA\server\default\log

HT4993 DEBUG MESSAGE WDT TIMEOUT

Similar Messages

Maybe you are looking for