HT4993 i did a master reset on my iphone 4. now when i try to set the phone back up from the start i put in the language and country, I hit next and it takes me to a screen that says connect to itunes, then will not me go any further, what do i do?
i did a master reset on my sprint iphone 4 and i do not know what steps to take to get the phone to where i can connect to wifi after putting in the language and country... please help
Connect it to your computer via the supplied sync cable and restore.
Similar Messages
-
My phone is stuck on the screen that says connect to itunes
my iphone 4 is stuck on the screen that says connect to itunes
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
My ipod 4th generation is stuck on recovery mode and is stuck on the screen that says to connect to the itunes store. I already tried using a non-damaged cable and connecting it to itunes, but the ipod is not showing up as a device on my computer or on itunes. I cant fix the recovery screen until i can coinnect it to itunes... so does someone have any suggestions?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to update my ipod touch 4 gen and it automatically shutoff and said connect to itunes on the screen. I did. it says it found an error restoring ipod, what do i do now to resttore my ipod back to working and functioning condition?
Hi marty292,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy -
Data Source is OLEDB connecting to AdventrureWorks2012
Setting Person.Address table column SpatialLocation to move it's data to Excel File
Connection Manager created
Right click on Source and choose Advance Editor
External Column SpatialLocation Data Type DT_IMAGE and Output Column DT_BYTES Click OK is fine
Destination is Excel Destination
Connection Manager created
Right click on Source and choose Advance Editor
External Column SpatialLocation Data Type DT_BYTES and Output Column DT_BYTES by default click OK and Advance Editor dialog got closed
Now I open Advance Editor check the settings found that my settings not accepted instead sets "Unicode string [DT_WSTR]"
Is there any bug? or any ideas how to make it work to save settings.
FYI yesterday I carried it was OK worked fine but today it's not working I have no changes to my system.
If you have a questions please let me know.
Any help is appreciated.Hi Sarojamaly,
I’m curious about the reason why you need to change the External Column data type in OLE DB Source. As per my understanding, we couldn’t change the External Column data type in OLE DB Source. Because the External Column data type is dependent on the source
table. We can only change the output column data type via Advance Editor or some transformations, like Data Conversion, Derived Column etc.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
It doen't even say that my iTouch is plugged in (same when i click 'My Computer' and it doesn't list it as a connected device). BUT, when i do plug it in my computer makes that little tone when something does get plugged into it.
Help?Follow all the Steps here
http://support.apple.com/kb/HT1808 -
My iPod classic, which is 6 years old is corrupted. A message that says ''Connect to iTunes to restore'' keeps on blinking on the screen, But when I connected it to iTunes it says an error has occured and my iPod has hung after i've disconnected it.
Hi,
Time to take your iPod in for service.
You can make a Genius Bar reservation in advance if you are in the U.S.
http://www.apple.com/retail/geniusbar/
Carolyn -
I got a blacklisted iphone 5 from att and I reset it and now when I try to set it up it needs a sim card so I went to the att store and they put a sim in and on the iPhone it says replacement needed couldn't complete activation.i just want use it as a ipod
To use it as an iPod it must be activated...to do that it has to accept a sim. A blacklisted iPhone cannot do that. Take it back to AT and T where you got it and get your money back.
-
When I take a photo it won't let me review it. It takes me to a screen that says no photo's or video's in this album. I just got it the I Phone 5, what button do I need to set up?
I will request that yor post be moved to the iPhone forum - it does not involve iPhoto for the Mac
LN -
I restored my iPad and then i clicked "Restore iTunes backup". It is finished but on the iPad screen it says connect to iTunes. I connected it to iTunes but it says the same thing. What should I do?
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port. (Make sure you have the latest version of iTune on your computer)
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
How can I disable my Ipod Touch that says connect to itunes and it won't let you slide to type in the password?
Connect the device to your iTunes library in recovery mode using the instructions in this Apple support document and restore the iPod.
iOS: Unable to update or restore
B-rock -
I keep getting a pop up on my iophone 5 that says "connect to itunes to use push notifications" I've connected to itunes and nothing happens. I cant use the phone as I can;t get the pop up to stop
So after exhausting countless hours I just added the App "Google Search". It's not as great of an interface but I can access Google Voice and keep tabs by just checking in every so often. Better than not having Google Voice at all.
-
My ipad has locked-up, it has frozen while running an app, and will not respond to any button, what do I do?
It simply stays on the same screen image, and does not respond to anything. When I plug it into itunes, there is no indication of its presence.
The ipad's clock has also stopped.
eekTry a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?
Thank you for responding. Nothing actually worked! After reading the posts online, I called Apple. They indicated they have seen problems with some software after their upgrades. The technician was able to fix the problem on my computer remotely, but I have no clue what he did! But, it was definitely related to their recent upgrade to my computer.
-
My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!
& it keeps trying to turn on but it wont . like the apple logo pops up for a minute , then turns off.Had exact same problem. Rang Apple support and various apple repairers. All of them said in effect, too bad, you'll have to lose everything since your last backup. It's a work phone with very important stuff on it and the latest backup was on a computer that had a virus. Convergence of crap :/
Happened to talk to a friend who said to try replacing the battery. Did that. Problem fixed. All data saved.
To all Apple support people: rather than say 'once it's in recovery mode you lose all data' try saying 'replace your battery and see if that works first'!!!!
Maybe you are looking for
-
I have lost my I pod devices and I can't find it anywhere what do I do??
I have lost my iPod 5 32 gb and I can not find it i have looked everywhere and had no luck what shall I do ??
-
Disconnect or connect the bluetooth makes MacBook Pro restart.
I have a MacBook Pro 13 inch, mid 2010, running OS X 10.9.2. Everytime (well, most of everytime) when the bluetooth disconnects from my wireless device, Such as: *Out of bluetooth distance *Manually turn off bluetooth connection on macbook pro *Switc
-
Faces info doesn't display when zoomed in
I have a number of group photos that I'm trying to Add Faces to. Because there are so many people in the picture, it's nearly impossible to add a box, or type in a name, when the boxes and fields are so small and/or overlapping. Yet if I zoom in to m
-
Satellite P100-240 CPU Replacement - which CPU Can I Install?
Does anyone know what CPU can I install in my P100-240? Any core 2 duo? Please don't tell me about warranty.I know I will lose it. Many thanks.
-
All, I am setting up access level for users in the production environment for QaaWS tool. All users can view QaaWS in production, but they CAN'T create/modify/delete QaaWS in production. What access level do I need to enable this? I tried to use the