HT4993 i took my sim card out now it wont turn on what can i do i didnt get the apple care

i took my sim card out my sprint iphone 5 now it wont turn back on

You iPhone 5 has a full 1 year Warranty with Apple, whether you have AppleCare or not. To turn iPhone ON, connect to Wall Charger for 10 minutes, iPhone may turn ON itself. If still OFF, keep on charger and Reset, hold both home and power buttons until the iPhone begins to start. This can take about 20 seconds of holding both buttons while on charger. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

Similar Messages

  • TS3474 bt mistake i disconnected my i-pod nano 6th generation without ejecting it. Now it wont turn on, what can i do?

    By mistake I disconnected my I-pod nano 6th Generation without ejecting it. What can I do?

    from http://www.apple.com/support/ipodnano/assistant/itunes/
    Press the Sleep/Wake button and the Volume Down button for at least 8 seconds until the Apple logo appears. You may need to repeat this step.

  • HT1688 I took my SIM card out of my iPhone so I could try a different phone and somehow some one stole my iPhone,,, was wondering there is ANY way i can locate it without my SIM card in it?

    I took my SIM card out of my iPhone so I could try a different phone and somehow some one stole my iPhone,,, was wondering there is ANY way i can locate it without my SIM card in it?

    Nope, you are out of luck.

  • I took my sims card out if my iPhone 4s to get the serial

    I took my sims card out of my iPhone 4s to find the serial # and when I put it back in my phone says I do not have a sims card. Can anybody help me?

    Why do you have to take the SIM card out for serial number?
    The iPhone serial number can be found in
    Settings > General > About > Serial Number > here.

  • I have been using my iPad with sim for weeks now, just 24 hrs ago the message I am having is no SIM card installed, I tried it with some other SIM card same same still pop up. What can I do pls

    I have been using my iPad with sim for weeks now, just 24 hrs ago the message I am having is no SIM card installed, I tried it with some other SIM card same same still pop up. What can I do pls

    ok, I did, and it said again congrats your iPhone is unlocked, but, when it said there was a new carrier update, I cancelled it, but, it asked me again, I cancelled again, I guess I'm scared it will lock it again if I allow the carrier update.
    Oh, there it goes again, this time on the phone, arg. I hit update, I hope it doesn't freak out.
    I'm glad I didn't destroy the SIM like I almost did. But, it will come out again, longer battery life with the cell portion turned off.

  • I turned off my phone and threw it, now it wont turn on, what do i do?

    i turned off my phone and threw it, now it wont turn on, what do i do?

    try flushing it?? how far did you throw it? did it land on a hard surface? soft? in water? really you threw it? bravo. I'd like to throw mine after installing iOS5. device I loved is now a total piece of crap

  • My new iphone 4  wont power on does the battery have to charge first? It was shipped thru mail and took 7days to get here.I managed to turn it on once and shut it of because i had to put sim card in.Now it wont power on.

    I tried holding down both buttons like everyone said and this doesnt work. My phone was shipped new from Ontario to Sask and took about a week to get here,Could it be because my battery is so low? And shouldnt it power on when it's plugged in or show a phone charging icon or have some lite on? My laptop won't even discover it when I plug it in. When I first took it out of the box i called virgin mobile.The lady told me to put sim card in because it did turn on at first and was asking for sim card so i put it in and all kinds of languages were displayed so i clicked on english and then then somehow shut the phone off because i wasnt familiar with it yet i have no idea how i shut it off.Anyway, I read a bit further and saw where the power button was and tried to turn it back on. No luck the apple logo appears with what looks like a hairline crack on the apple itself and a very thin blue bar no thicker than a pen stroke its about halfway right behind the apple logo like its going to power on but it doesnt, it just goes black.Then when I hold the 2 buttons down, the home button and the power button at the same time, the apple logo flahes on about every 3or4 seconds as tho its going to turn on but it doesnt, occasionally the bar comes up with the logo but not every time.What can I do? Will it work if I let it charge for a couple hours? Does it need a couple hrs and shud there at least be a charging icon showing me its charging?? I have it hooked up by USB to my laptop charging.My computer and Itunes doesnt even acknowledge its even there. PLEASE HELP? Thanks so much!

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • Muvo TX FM took a dive to pavement, now it wont turn on. HE

    Yeah so it took a pretty good hit to the pavement the other night and now it wont turn on.
    Everything still works as far as connecting it to the computer, adding/deleting files, etc.. but it will not turn on to listen to anything.....
    is there anything i can do or try?
    i opened it up and nothing was broken, not there are many parts inside to see damage

    If it doesn't switch on then it could be the Play button itself. To test this try connecting the player to your PC in Recovery Mode - load the drivers first, then press and hold the Play button while connecting it to your PC. Keep holding the Play button until the New Hardware Wizard starts - if it does then you have confirmed that the Play button is working so it's up to you whether you continue with installing the Recovery Mode drivers.
    If the player just connects as normal then it could be the button that's faulty.
    PB

  • I synced my new ipad air with my pc and now my ipad wont turn on what can i do?

    I synced my new ipad air with iTunes on my pc to set up and now my ipad will not turn on  what should I do?

    Basics from the manual are restart, reset, restore.
    Try all of these.

  • My ipod is jailbroken and i tried to restore it but now it wont turn on, what do i do now?

    My ipod is jailbroken but i tried to restore it so it wouldn't anymore but now it wont turn oon, it shows the apple logo for like 30 seconds then the green pois0n logo for like a minute then it turns off and starts again.
    can someone please help!!!
    i am desprate for for ant suggestions!!!

    Jailbreak is against Apple's policy about using its product.
    It does exactly what oyu have experienced ... your product is bricked.
    Apple will not help, and this forum will not help.

  • I forgot my password for my ipod and tried to restore it now it wont turn on. what do i do?

    i forgot my password for my ipod and tried to restore it now it wont turn on. not sure what to do. HELP?

    The first way you can connect the iPod to the computer it was originally configured on, and open iTunes. When you disconnect iPod from the computer, it will no longer be locked. You then can go into the preferences and turn off the lock. If you don’t have access to the original computer or it just does not work, you can jump to the second method. The best fix for any iPod problem is the classic “restore your iPod to factory settings.” That this will erase all data on your iPod and take you back to day one, but you can just add your music and data back to iPod from iTunes. This is the true benefit of the iPod / iTunes relationship.

  • My iPod had full charge and suddenly cut out, now it wont turn on, iTunes wont connect either, any advice?

    Hey everyone, right, i was recently using my iPod touch 4th gen (which had been on charge for about 5 hours), i took a quick 2 minute break and got back to find the screen blank, now the iPod wont turn on. I have tried connecting it to iTunes but it doesnt even connect. I havent got any jailbreaking software on there although i havent updated the software in a while. Any advice?

    - See if resetting the iPod will eithr bring it to life or asllow itunes to see the iPod so you can restore the iPod via iTunes
    - Next see if placing the iPod in recovery mode will allow it to be restored.. For recovry mode see:
    iPhone and iPod touch: Unable to update or restore
    - Last, make an appontment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • HT4623 Tried to update my iPhone 4 this morning and it's frozen. When I turn it off and on again I just get the apple sign fading in and out and cannot use the phone

    Can anyone help. I tried to update my iPhone 4 this morning and it just got half way through the update and froze. I managed to turn it off eventually, but now all it will do is show the apple sign fading in and out and is un usable. It's not even being recognised as plugged into the laptop!!!!!!!

    Hello, Spedellen. 
    Thank you for visiting Apple Support Communities. 
    When experiencing issues restoring an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • My phone died and i charged it overnight but now it wont turn on what do i do?

    Okay so my phone had died last night and my charger works fine so i went to charge it and of course the battery icon shows up so then i went to sleep i just woke up to see if it's on and it wasn't i tried re booting it but that wont turn on either, then i went to plug it in my computer and my iPhone icon didn't pop up, now i don't know what to do, someone please help.

    Thanks Lawrench Finch. My iphone was not responding and i became worried about it . Then i opened this apple support and found your advice and this has worked.
    Once again than\k you.
    Pradeep

  • I took my SIM card out of my iPhone 4S and now I can't text the people with only iMessage like people with iPod 5 and with iMessage I can't text them back but I can text people that has

    Please help asap

    If you took the SIM out you will not be able to use SMS because you need a cel carrier for that.

Maybe you are looking for

  • Windows 7 blank error message at logon

    Good day computer folks! I have had a problem for some time with my Asus G74sx, with Windows 7 Home.  After boot up, my logon time has gotten fairly long and I get a blank error message box titles only "error".  Process explorer groups it under csrss

  • Custom Layout for FBL1N (Open Vendor Items)

    Hi All, I would like to create a custom layout for the List Output.  Currently there is only options as to display the Standard Local currency, I would like to include the value for the Document Currency (Transaction Currency) as well.  Does anyone h

  • E-mail button using something other then Outlook

    My question is simple when using an e-mail button you can send the PDF or XML through e-mail to a certain address such as a gmail, yahoo, msn or etc.. email account but the host e-mail server it is using is the Outlook on your local machine. My quest

  • Data Migration for Responsibilities

    Hello Everyone, I wanted to migrate responsibilities from our legacy systems to SAP C4C and for that I am using standard migration template available in C4C but unfortunately the file size which we have after filling this template is more than the si

  • Operating systems supported by the PC-TIO-10 board

    I am updating a Windows application that uses the PC-TIO-10 National INstruments board (via an ISA slot). What operating systems does the PC-TIO-10 drivers run on ? Thank You !