HT4993 Is it possible to Pay the Difference between My 4S and iPhone 5 ?

I Recently bought My iphone 4S around April because I was in need of a New Phone . Is it possible for me to pay the difference between My phone and the iPhone 5 even if im under Contract ?

Similar Messages

Macbook changes,paying the difference between the old and the new

I am from Brazil,and I am going to Orlando. I have an old macbook and I would like to change the old macbook to a new one. I want to give my old and pay the difference between the old for the new.Could I do this,if yes,How it happens?
Thank you

it doesnt work that way. Apple does not accept trades. But they may give you a gift card: https://www.apple.com/recycling/gift-card/

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

The difference between FIELD-SYMBOL and normal DATA TYPE

Dear experts,
Please see the example below, both are output the same result.
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N,
      ENTRY TYPE STRING.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
MOVE EXTERNAL_RECORD+POSITION(LENGTH) TO ENTRY.
WRITE ENTRY.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
--OR It can be written as--
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N.
FIELD-SYMBOLS <ENTRY>.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
ASSIGN EXTERNAL_RECORD+POSITION(LENGTH) TO <ENTRY>.
WRITE <ENTRY>.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
Is there any special circumstances we need to use FIELD-SYMBOL?
Why is FIELD-SYMBOL is introduce in the first place?
Kindly advice with example.
Thanks in advance for those who can help me on this.

HI,
You can use field symbols to make the program more dynamic. In this example the name of a table control is substituted by a field symbol. Thus you cal call the form with any internal table, using the name of the table control as a parameter.
Example
form insert_row
using p_tc_name.
field-symbols <tc> type cxtab_control. "Table control
assign (p_tc_name) to <tc>.
insert 100 lines in table control
<tc>-lines = 100.
Field symbols allow you to:
**     Assign an alias to a data object(for example, a shortened
        name for data objects structured through several hierarchies
        - <fs>-f instead of rec1-rec2-rec3-f)
**     Set the offset and length for a string variably at runtime
**     Set a pointer to a data object that you determine at runtime (dynamic ASSIGN)
**     Adopt or change the type of a field dynamically at runtime
**     Access components of a structure
**     (from Release 4.5A) Point to lines of an internal table
        (process internal tables without a separate work area)
Field symbols in ABAP are similar to pointers in other programming
languages. However, pointers (as used in PASCAL or C) differ from ABAP
field symbols in their reference syntax.
The statement ASSIGN f to <fs> assigns the field f to field
symbol <fs>. The field symbol <fs> then "points" to the
contents of field f at runtime. This means that all changes to the
contents of f are visible in <fs> and vice versa. You declare
the field symbol <fs> using the statement FIELD-SYMBOLS: <fs>.
Reference syntax
Programming languages such as PASCAL and C use a dereferencing symbol
to indicate the difference between a reference and the object to which
it refers; so PASCAL would use p^ for a pointer instead of p, C would
use *p instead of p. ABAP does not have any such dereferencing symbol.
**     In PASCAL or C, if you assign a pointer p1 to a pointer p2,
you force p1 to point to the object to which p2 refers (reference semantics).
**     In ABAP, if you assign a field symbol <fs1> to a field
symbol <fs2>, <fs1> takes the value of the data object to
which <fs2> refers (value semantics).
**     Field symbols in ABAP are always dereferenced, that is,
they always access the referenced data object. If you want to
change the reference yourself in ABAP, you can use the ASSIGN statement
to assign field symbol <fs1> to field symbol <fs2>.
Using field symbols
You declare field symbols using the FIELD-SYMBOLS statement.
They may be declared either with or without a specific type.
At runtime you assign a field to the field symbol using the ASSIGN
statement. All of the operations on the field symbol act on the field
assigned to it.
When you assign a field to an untyped field symbol, the field symbol
adopts the type of the field. If, on the other hand, you want to assign
a field to a typed field symbol, the type of the field and that of the
field symbol must be compatible.
A field symbol can point to any data object and from Release 4.5A,
they can also point to lines of internal tables.
The brackets (<>) are part of the syntax.
Use the expression <fs> IS ASSIGNED to find out whether the field
symbol <fs> is assigned to a field.
The statement UNASSIGN <fs> sets the field symbol <fs> so
that it points to nothing. The logical expression <fs>
IS ASSIGNED is then false. The corresponding negative expression
is IF NOT <fs> IS ASSIGNED.
An unassigned field symbol <fs> behaves as a constant with
type C(1) and initial value SPACE.
MOVE <fs>
TO dest     Transfers the initial value SPACE to the variable dest
MOVE 'A' to <fs>
Not possible, since <fs> is a constant
(runtime error).
To lift a type restriction, use the CASTING addition in the
ASSIGN statement. The data object is then interpreted as though
it had the data type of the field symbol. You can also do this
with untyped field symbols using the CASTING TYPE <type> addition.
The danger with pointers is that they may point to invalid areas.
This danger is not so acute in ABAP, because the language does not
use address arithmetic (for example, in other languages, pointer p
might point to address 1024. After the statement p = p + 10, it would
point to the address 1034). However, the danger does still exist, and
memory protection violations lead to runtime errors.
A pointer in ABAP may not point beyond a segment boundary. ABAP does
not have one large address space, but rather a set of segments.
Each of the following has its own segment:
*     All global data
*     All local data
*     Each table work area (TABLES)
*     Each COMMON PART
You should only let field symbols move within an elementary field or
structure where ABAP allows you to assign both within the global data
and beyond a field boundary.
Rgds
Umakanth

What is the difference between smart forms and scripts.?

what is the difference between smart forms and scripts.?

Differences between Smartforms and SAPscript
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Routines can be written in smartforms tool.
d) Smartforms generates a function module when activated.
e) Smartforms can create web enable forms like XML
f) smartforms itself contine subroutine pools need not to main separetly like in case of scripts
Request you to refer the following links
www.sap-img.com/smartforms/smartform-sapscripts.htm
www.erpgenie.com/abap/smartforms_sapscript.htm
Sapscript vs Smartforms
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated
Scripts are client dependent whereas smartforms aren't.
Upto 99 main windows are possible in scripts and only one in smarforms.
To create multiple main windows in scripts, you just have to give the window type as MAIN whnever you create a window.
Scripts still exists but smartforms are in use from 4.6c version, now the lastest version of these two is adobe forms
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaptation of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Reward Points if useful.

BCT - how to find the difference between installed BCT and the newest BCT?

Hi,
How do I find the difference between installed BCT and the newest BCT?
or find a description of the newest BCT?
Thank you.
- Gunnar

Hi,
Thank you for your answer.
I am aware of the possibilities you mention.
I am looking for a way to find the parts of the business content that has been modified since I installed our current version WITHOUT installing anything.
That is for example:
If F&R business content has been moved from 3.x technology to 7.0
If there is changes to the F&R content at all
-> if our current version of business content already contains the newest version of Business Content for F&R, then it is not a prerequirement to an F&R project that we update business content.
The possibility to see that the only changes might be in the area of SAP HCM ...
Thank you.
- Gunnar

What is the difference between Genius Mix and Genius Playlist?

Yeah, what is actually the difference between Genius Mix and Genius Playlist?
G.P. starts with a song I select and teams up with songs that go with it while G.M. is only songs that go well together, is that it?
A G.P. that I like can be saved and altered, but G.M.´s seems to be volatile? Can I see all the songs in a G.M.? All I can find, is the possibility to click Next and Previous.
Thanks

Genius Mixes are 'Genre' based groups of music.
Genius Playlists are songs that go together based on other people's playlists, they can be from any Genre.
You can't see what will be playing in the Genius Mix list.
Message was edited by: Ian Parkinson

Can Anybody explain me the difference between a Bapi and a webservice?

Can Anybody explain me the difference between a Bapi and a webservice?

Hi Anil,
<b>BAPI</b>
BAPI is a library of functions that are released to the public
as an interface into an existing SAP system from an external
system.A BAPI function is a function module that
can be called remotely using the RFC technology
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
In this case you only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI. It is not possible to connect SAP to Non-SAP systems to retrieve data using RFC alone. RFC can acces the SAP from outside only through BAPI and same is for vice versa access.
<b>Webservice</b>
In simpler terms, WebService is an application on the Web/Internet. Wheneever Service is requested by the user, it provides the service (i.e Request/Response)
A web service is a collection of protocols and standards used for exchanging data between applications or systems
In SAP world, we can expose an application into the Webservice. For e.g We can expose ABAP programs into Webservice.
XI uses SOAP adapter to communicate with webservices see below...why only soap adpater???
-> Some remote clients or Web services providers are only able to communicate by means of SOAP messages
->SOAP adapter enables you to exchange SOAP message between remote clients and Web Service Servers and the Integration Server.
-> The SOAP Adapter provides a runtime environment that includes various SOAP components for the processing of SOAP message.
-> You use the SOAP adapter to connect such systems to the Integration Server directly
-> The SOAP adapter uses a helper class to instantiate and control these SOAP components
->The SOAP adapter receives a msg from the remote client or Web service provider, converts the SOAP protocol into XI msg protocol and then sends the msg to the Integration Server to be processed further.
Basically RFCs BAPI are all SAP oriented, Webservices are language / environement independent. So, all one has to do is publish a Webservice and any external system by providing the data in the correct format, can get the approopriate response back.
see these links to know more abt webservices..
http://www.webservices.org/
http://www.w3.org/2002/ws/
regards
biplab

Wht is the difference between unicode program and non unicode program ?

Hi guru,
wht is the difference between unicode program and non unicode program ?
Regards
Subash

About brief idea about unicode
In the past, SAP developers used various codes to encode characters of different alphabets, for example, ASCII, EBCDI, or double-byte code pages.
ASCII (American Standard Code for Information Interchange) encodes each character using 1 byte = 8 bit. This makes it possible to represent a maximum of 28 = 256 characters to which the combinations 00000000, 11111111 are assigned. Common code pages are, for example, ISO88591 for West European or ISO88595 for Cyrillic fonts.
EBCDI (Extended Binary Coded Decimal Interchange) also uses 1 byte to encode each character, which again makes it possible to represent 256 characters. EBCDIC 0697/0500 is an old IBM format that is used on AS/400 machines for West European fonts, for example.
Double-byte code pages require 1 or 2 bytes for each character. This allows you to form 216 = 65536 combinations where usually only 10,000 - 15,000 characters are used. Double-byte code pages are, for example, SJIS for Japanese and BIG5 for traditional Chinese.
Using these character sets, you can account for each language relevant to the SAP System. However, problems occur if you want to merge texts from different incompatible character sets in a central system. Equally, exchanging data between systems with incompatible character sets can result in unprecedented situations.
One solution to this problem is to use a code comprising all characters used on earth. This code is called Unicode (ISO/IEC 10646) and consists of at least 16 bit = 2 bytes, alternatively of 32 bit = 4 bytes per character. Although the conversion effort for the R/3 kernel and applications is considerable, the migration to Unicode provides great benefits in the long run:
The Internet and consequently also mySAP.com are entirely based on Unicode, which thus is a basic requirement for international competitiveness.
Unicode allows all R/3 users to install a central R/3 System that covers all business processes worldwide.
Companies using different distributed systems frequently want to aggregate their worldwide corporate data. Without Unicode, they would be able to do this only to a limited degree.
With Unicode, you can use multiple languages simultaneously at a single frontend computer.
Unicode is required for cross-application data exchange without loss of data due to incompatible character sets. One way to present documents in the World Wide Web (www) is XML, for example.
ABAP programs must be modified wherever an explicit or implicit assumption is made with regard to the internal length of a character. As a result, a new level of abstraction is reached which makes it possible to run one and the same program both in conventional and in Unicode systems. In addition, if new characters are added to the Unicode character set, SAP can decide whether to represent these characters internally using 2 or 4 bytes.
A Unicode-enabled ABAP program (UP) is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system (NUS) as in a Unicode system (US). In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
In a US, you can only execute programs for which the Unicode flag is set. In future, the Unicode flag must be set for all SAP programs to enable them to run on a US. If the Unicode flag is set for a program, the syntax is checked and the program executed according to the rules described in this document, regardless of whether the system is a US or an NUS. From now on, the Unicode flag must be set for all new programs and classes that are created.
If the Unicode flag is not set, a program can only be executed in an NUS. The syntactical and semantic changes described below do not apply to such programs. However, you can use all language extensions that have been introduced in the process of the conversion to Unicode.
As a result of the modifications and restrictions associated with the Unicode flag, programs are executed in both Unicode and non-Unicode systems with the same semantics to a large degree. In rare cases, however, differences may occur. Programs that are designed to run on both systems therefore need to be tested on both platforms.
You can also check out these official SAP locations on the SAP Service Marketplace:
http://service.sap.com/unicode
http://service.sap.com/unicode@SAP
http://service.sap.com/i18n
Regards,
Santosh

What is the difference between relational database and NoSql DB

HI,
i never work with any nosql db. so i like to know What is the difference between relational database and NoSql DB ?
in relational db sql server we can create relation between table by PK and FK. so is it possible in NoSql db like Mongo db ?
sql server db use to in big data for any organization. does Mongo db like nosql db use for same purpose ?
i like to know in what kind of situation people use Mongo db or any NoSql db. please tell me few sample scenario where people like to use Mongo db or any NoSql. thanks

Here are some good links that describe the differences:
http://www.mongodb.com/nosql-explained
https://blog.udemy.com/nosql-vs-sql-2/
http://www.thegeekstuff.com/2014/01/sql-vs-nosql-db/
Mark as answer or vote as helpful if you find it useful | Igor

What are the difference between 4.6c and 4.7 versions?

what are the difference between 4.6c and 4.7 versions?
if any please give me answer
regards
ramanji

Hi,
Upgrade SAP or Installation of SAP R/3 and ECC
What is ECC? Where to find the installation steps of ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
http://service.sap.com/instguides
ECC means Enterprise Central Component.
There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
Upgrade to 4.7
Have you gone through an upgrade to 4.7?
What are the difference or changes associated with 4.7.
If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects
Just to forewarn you of a potential problem which have been encounter at the point of writing.
After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red!
The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate.
SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red.
This problem is currently with SAP and it is confirmed that nothing have been done wrongly.
Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
Where I can get the document with upgrade steps on the service market place?
It is of course possible and supported:
http://service.sap.com/inguides
--> SAP Components
--> SAP R/3 Enterprise
--> (choose your version)
at the bottom there is an "Upgrade guide" for Windows and Unix.
For Upgrades it is recommended to read ALL the notes mentioned in the
upgrade guide and to make sure one is using
- the correct version of the "tp" program
- the correct version of the "R3trans" program
- the correct version of the "R3up" program
All that is explained in the upgrade guide and in the corresponding notes.
If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
Installation of SAP R/3
Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that.
Configuration is :
   OS - windows 2003 server
   DB - Oracle 9i
   SAP 4.7
http://service.sap.com/instguides
--> SAP Components
--> SAP R/3 Enterprise
--> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
--> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
Without access you won't be able to successfully run any SAP systems because it has notes, patches etc.

What is the difference between P35 Platinum and P35 Neo2 FIR?

What is the difference between P35 Platinum and P35 Neo2 FIR?
P35 Platinum
P35 Neo2 FIR
BIOS is identical?

The P35 Neo2 is FIR is actually listed as P35 Neo2 FR/FIR. It is what you could call a "modular mainboard". Even if it has the same PCB as the P35 Platinum mainboard, it doesn't necessarily mean, that it will always come with the same features.
If you look at the mainboard manual you will find that the ICH9R-Chipset and Firewire are mentioned as optional features. That means you will be able to purchase versions of this mainboard that will only have an ICH9 chipset and therefore won't support RAID or that don't have a firewire interface.
The abbreviation F,I and R have the following meaning:
F...Gigabit LAN
I... Firewire
R...RAID
In case you decide to buy the P35 Neo2 mainboard, pay close attention to the feature list. Even if the board is listed as FIR by a specific dealer, make sure it really comes with firewire and an ICH9R-chipset. If someone decides to sell the board with the full name that appears on the MSI Support Site (FR/FIR) he might be actually trying to sell a P35 Neo2-F trying to get a better price.

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

HT4993 Is it possible to Pay the Difference between My 4S and iPhone 5 ?

Similar Messages

Maybe you are looking for