HT4993 my buttons dont work and music wont play out loud

Music/ videos only plays if i have headphones in have reset phone turned on and off and also restored phone nothing has worked. Has anyone else had this problem and if so what did you do?

You may have busted the speakers. This tends to happen when people drop their phone a lot or you might just have a flawed iPhone. Consult with your cellular carrier or apple store, if you still have a warrenty, you may be able to get a new iPhone.

Similar Messages

  • HT1727 i copied itune music from old hard drive to memory disk the copied onto new hard drive into itunes and music wont play unless removalbe disk is inserted

    i copied itune music from old hard drive to memory disk the copied onto new hard drive into itunes and music wont play unless removalbe disk is inserted

    Then your iTunes must be looking at the removable disc, not your hard drive. Did you actually copy the songs onto your computer, or simply tell iTunes to look at the removable drive?
    Highlight a song and click on File/Get Info/Summary>Where and check the location that iTunes has listed for the song. What does it say?

  • HT1386 home button dont work and it say ipod is disable and connect to itunes?

    I have a ipod and the home and power button dont work so there is button on the screen that is the home button. Now all it says is IPod is disabled connect to itunes? any help

    Place the iPod in recovery mode using one of these programs and then restore via iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • After installing WMP the media buttons dont work for iTunes(back/play/for and backward)-sound control

    hello, since i got my computer, i've been using  iTunes.
    i was happy, media keys working perfectly and all, but 1 month ago, i had to install WMP to run a diferent format that itunes dont support and after that day, my media keys stop working for itunes, first i think it war my keyboard(microsoft laser 5000) and a software conflict.
    but now i buy a razer blackwidow ultimate(yesterday) and still dont working...
    i spend all my weekend trying to figure out whats the problem, but i dont know.
    i tried tutorials for similar problems, but noting worked...
    and now the media keys arent working even on WMP
    I DONT KNOW WHAT TO DO!

    Hi Josh
    Thanks for this useful information and for the report about your experience.
    I have already noticed this Toshiba Value Added Package for Vista and have already read the More info .
    This option provides details about the single drivers and tools. For Toshiba Value Added Package I found this:
    "This package installs a range of important utilities.TOSHIBA Components Common Driver This module is an essential component on Windows Vista. It is required to make other TOSHIBA original programs work properly.
    bye

  • A dvd with pictures and music wont play. how do i play this

    i have an hp pavillion dv7-3174nr notebook. a dvd with pictures as a slideshow wont play. how do i play this

    headclown1000 wrote:
    bd-rom
    Hi,
    Sorry, let me try this way: Which application did you use to create the DVD disc ? Please note: BD is for BluRay Disc. Many BD players can play DVD but all DVD players (only) can not play BD's.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Centre button does not work and Ipod wont play

    Help please ! My IPOD seems to have just stopped working ! it will scroll using the buttons but wont actually allow me to select anything with the centre button. I have tried turning off and on which did not help and have just let the thing go totally flat and am now recharging to see if that will help, if not im stuck please help anyone ? is this regular is it terminal ?

    hmmm.... weird. i tried the centre button again... and it still did not work. but when i pressed the centre button quickly about 5 times... that it is finally working again! weird!

  • My power button, volume down and up button dont work, and the phone itself is bent. What should I do?

    Ive had my iPhone in a case since I've had the phone, I'm really dissapointed in whats happening to it. 
    Even with the case on, I very rarely drop it.  Any suggestions or options on how to solve?

    With so many serious issues, make Genius Reservation and take iPhone to Apple Store for evaluation. Maybe the Genius will handle all this under Warranty. If not covered due to being bent, but you have AppleCare + plus, it will only be $50 for a perfect replacement iPhone 5 exactly like yours. If no coverage, it will be $229.

  • NEED HELP ASAP When I put my headphones in the music will play out loud. This has happened to another pair of my ear phones and I thought. They were broken so I brought another pair and they still won't work

    Okay so it basically explains everything in the summary I haven't had ear phones in a long time because they always break so then I found a old pair and then I put it in, but when I put the ear phones in the music started to play aloud .so, I thought they were still broken  so I brought a new pair and the same thing happened??  Did I  change the settings on accident or something some body please help me!!

    Sorry all my old isp can do is send out an engineer, and has no forum, but my new isp BT has
    i know you can't talk to BTW for me, but some genral BB user help and advice would be nice as this is regarding a move to BT within the next few days

  • My macbook started running wierd for example if you press anything it would freeze for 10-20 mins so i rebooted it now when it turns on the screen dont work and the fan is really loud???

    help!!!!

    I would reinstall:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • My itunes music wont play

    my music wont play out of itunes

    If you read other posts, you will see that you are not the only one. Getting the program (download I guess) is not much help, but getting it installed is another story.

  • Why won't my music play out loud anymore?

    I usually plug my iPhone into my radio and the sound bar disappears, I'm used to that and when I'd unplug it it'd be back and my music would play out loud no problem.
    Well as of yesterday it doesn't play outloud.  My alarm wouldn't even go off this morning ,  my ringtone will go off no problem when I get a call or text.  But to play music I don't get the sound bar.  I can plug my headphones in at it appears.
    I've shut my phone off and restarted it.  
    I also held the sleep button and home button to reboot it . 
    Nothing .
    Is there a setting I need to change ,  ? 

    Try inserting and removing the headphones several times in a row to try to release the mechanism that has not released which currently indicates the headphones remain inserted when they are not. The ringtone for a call will go off regardless if headphones are inserted - for those with headphones inserted and being used that may remove the headphones from their ears and set the phone down temporarily without removing the headphones from the iPhone - so a call won't be missed.

  • My music wont play and the volume buttons wont work

    My music wont play and the volume buttons are not working, the little sliding thing at the bottom to control your volume of the music had disapeared? please help , from india

    If you have a docking station try docking the phone.  My sound came back immediately when I did this.

  • My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

    My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.

    If in settings, music, volume limit is off then restart your phone first. Hold the home and off button down until the apple symbol comes up.

  • My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4

    My phone as working fine until suddenly 90% of my music, most purchased, skipped over in shuffle. i then looked again and it had a little red circle next to the song and it wont play. It works fine on my iTunes on my laptop but not on my iPhone 4

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • My buttons arent working and my screen is just black and its playing music, help me!!

    my buttons arent working and my screen is just black and its playing music, help me!!

    Hello yung_jvyden,
    So your iPhone is on or it wouldn't be playing music yet you can't seem to "wake it up" as the buttons aren't responding.
    There's a section in this article for buttons not responding.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    Note it links to 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Thank you for using Apple Support Communities.
    Nubz

Maybe you are looking for

  • No key field found for creation of DataSource - Classification Datasource

    Hello, While trying to create a clasiffication datasource based on 0PLANT_ATTR, when i assign a characteristic and push the DataSource button, i get the following message: No key field found for creation of DataSource Diagnosis During generation of a

  • Webservice and UI codes in one application

    Hi, We have two applications, one for the UI and one for web services. Both of them have Model project. Hence, we are thinking of merging then into one application which contains three projects: UI, Web services and Model so that both UI and Web serv

  • Passing parameters in PL/SQL FOLDER

    I've made a structure of content inside a content area. Inside this structure, I've created som PL/SQL Folders to display information stored in a rempote database. How can I manipulate the values to submit from the area of the PL/SQL folder, for inst

  • Can't upgrade logic pro in Lion

    After installing Lion I can't upgrade the not working Logic Pro 9.1.1 to 9.1.4. First to upgrade from 9.02 to 9.1.1 fails because I get the message: 'your computer does not need this update'. Then to upgrade from 9.02 to 9.14 fails because I got the

  • IOS, how to add Arabic in "Metadata and Uploads"

    I want to add Arabic language in my app's "Metadata and Uploads" besides default English language. I clicked "English (Default)" drop-down list, but could not find Arabic there. Is it because it's a right-to-left language? I've added Arabic localizab