HT4994 what is import sim contacts option i don't want to loose contacts if sim is changed pls guide

i need to know the option import sim contacts usage ,i do not want to loose any contact once i change the sim.

Import sim contacts is you just import contacts which are present on your SIM. (Copy)
You can anytime backup your contacts either to iCloud/Dropbox/Outlook in order to restore later.
There is a nice app called as McBackup (Free) on iStore, which will back you contacts to your email accounts setup on your device.

Similar Messages

ITunes won't open. it says "Error 7 iTunes was not installed correctly" I know I did though. Now what? Should I uninstall? I don't want to loose my music!

I have the latest version of iTunes and when I went to go open it, it can't! It says: "iTunes was not installed correctly. Please reinstall iTunes.Error 7 (Windows error 126)" What do I do now? Should I uninstall and try installing it again? I don't want to loose any of my music and info. PLEASE HELP!

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100023)

My original computer that has my itunes account on it no longer works. I am trying to import my phones itunes settings into my new computer and it is not letting me and I don't want to loose all my photos and music, what do I do?

My original computer that has my itunes account on it no longer works. I am trying to import my phones itunes settings into my new computer and it is not letting me and I don't want to loose all my photos and music, what do I do?

It does not magically appear in a new place. It will only be where you put it.
Copy everything from your old computer, or your backup copy of your old computer, to your new one.

I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.

I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.

Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694

I have just bought a new pc with windows 7 my old one can not be started so I can not deauthorise etc, how do I now put my iphone 4 on my new computer, I don't care about the songs I have those on external hard drive, but I don't want to loose my contact

I have just bought a new pc with windows 7 my old computer cannot be started so I cannot deauthorise it etc, how do I now put my iphone 4 on my new computer, I don't care about the songs I have those on external hard drive, but I don't want to loose my contacts, calenders etc

Terry,
Plug your iPhone 5 into your Leopard Machine.
Fire up iPhoto.
The phone should become available in iPhoto, and then you can import the camera roll.
-Alan.

My computer is broken. I have reinstalled itunes on a new one. I don't want to loose what i have on my ipod touch. What do i have to do to transfer what i have in my ipod touch to my itunes on my new computer

my computer is broken. I have reinstalled itunes on a new one. I don't want to loose what <i have on my ipod touch. What do i have to do to transfer what i have in my ipod touch to my itunes on my new computer

Here are a few suggestions:
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
http://www.softpedia.com/get/IPOD-TOOLS/Multimedia-IPOD-tools/XPlay.shtml
http://videoformatconverter.net/imtoo-ipod-computer-transfer-review/
http://videoformatconverter.net/lenogo-ipodipod-touchiphone-to-pc-transfer-revie w/
Hope you get it sorted out.
Pete

How Can I Import Primary contacts in new application? Pls Help...!

Hi All,
I am Importing Company Contacts from one SOD system to another SOD application (Copy of the earlier SOD). Can anyone tell me how can I import Primary Contact value?
Company Contacts are successfully Imported but Primary contact checkbox is not set for anyone, Pls let me know if there any way to import that?
Regards,
Abhay

Abhay, the first contact imported for an account will be the primary contact. There is not a separate import to indicate the primary contact.

HT4913 It says that when I turn on I tunes match that it will erase the music library on my iOS devise and replaced by what is in the cloud. But I have imported a lot of cd's into my iOS devise and don't want to loose those songs and I don't want them del

I Had to reinstall windows on my computer. I made sure all my songs etc were on my iPods/iPad. Now when I plug the iPod in it says (in iTunes Match) that my music library will be deleted and replaced by what is in the cloud. However I don't want those songs erased. I want them to go up to the I tunes match cloud.
so that I can down load them again.
also how do I get I tunes match to remember my playlists? It only has album etc.
thank you so very much. I appreciate any help.

See Recover your iTunes library from your iPod or iOS device.
tt2

Photos keeps wanting to import iPhone pics that I *don't* want to import

I have photos on my phone that I just don't want or need to import into Photos on my Mac. In iPhoto, once I told it that I didn't want to import a photo, iPhoto never asked about it again. In Photos, however, each time I connect my phone, it brings up the same pictures all over again, along with any new ones. So it's essentially asking me over and over to import the same photos that I don't WANT to import.
I've looked in Settings (minimal as they are), but I can't find anything to tell it to ignore those pictures after the first time I say not to import them.
Does anyone have any idea how to have those pictures just ignored by the new Photos app?

Thanks for the responses, but never mind. I realized that I was actually importing them originally and then deleting them from iPhotos. I can do the same thing in Photos. No problem, then.

New Firefox upgrade limits my drop down options & I don't want to move browsers!

Ever since I upgraded to the new Firefox, my drop down options are limited for example when I need to select a birth date it only shows up to the 20th.
Makes it really difficult for me to do everything especially for university.. I have to use another computer or browser but I really don't want to move from Firefox so I'm holding on!
I have tried taking off add ons, uninstalling and safe mode. Nothing worked. It only happened after I updated.
Please help!

Are you able to scroll from 11 down using the down-arrow key?

HT4994 what if the sim card is from another phone? Can i change it to an iPhone online?

Please help

Call the carrier - AT&T - and ask them to unlock the phone. Be advised AT&T will only unlock if your account is in good standing. Alternatively you can request it here:
https://www.att.com/deviceunlock/client/en_GB/termsAndCondition
More information here:
http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=RmcxNGDEhNO

Changed my pc and don't want to loose my contacts

I've just changed my pc and i'm affraid to sync with another computer because of my contacts. if i do it, won't i loose all my phone numbers?? if i connect the iphone to the new computer, will it sync with the outlook data in the new computer?

If you have Outlook 2003 or 2007 available on the computer and it includes contact info, you will be provided a merge prompt with the first sync, which you want to select. The same applies to syncing calendar events with Outlook.
If Outlook on the new computer does not include any contact info or calendar events, before the first sync enter one contact in the Outlook address book and one calendar event in the Outlook calendar. Make these up if needed, which can be deleted later. This will provide a merge prompt with the first sync, which you want to select.
Outlook also includes an option to forward all contacts as separate vCard attachments to an email message. With Outlook on your old computer, you can send this email to yourself - to the email address for an email account that you access with Outlook on the new computer. Save the attached vCard files from the received message to a folder created on the Desktop. Use the Outlook contact import feature navigating to the folder on the Desktop where all vCard files are stored.

Importing HDV footage - seems you don't want to use Premiere (?)

Hi everyone, and good morning.
Well, after many great posts, and lots of help here, I think I realize something....
If you own a camcorder that does HDV footage ( like my Canon H20 ), you must use something other than Premiere to import your original footage from the camcorder, if you wish to do any type of editing in Premiere later on.
If I understand what you have all told me that is.
For clarfication, last week, I imported my first HDV tape using Premiere, and the resulting file was a very high quality .mpeg file, however, it was not editable in Premiere at all. The audio and video were totally out of sync.
So, I then re-captured the original video from the camera into Pinnacle Studio 11, and this resulted in 2 files, a video and audio file. ( .wav and a .m2v file ). These files import into Premiere very well, and the audio and video is perfectly in sync from beginning to end.
With all this said, is there any point at all in keeping the original .mpeg file that I originally captured from the camcorder into Premiere ???
At this point, I don't see any advantage to this, but thought I would ask. I've read numerous posts that .mpeg is just not great for editing, etc,etc, so perhaps I should just delete this file, and keep going the route I'm now using ( capturing the original camcorder footage with Pinnacle Studio 11 ) (?? )
I also wonder, if one only owns Premiere, then what on earth do you do, if you have an HDV camcorder ? ( perhaps all of you that own one of these camcorders, capture the video footage from the camcorder, in a program other than Premiere ? )
Thanks for any info you may wish to give,
Dave.

I am not so sure the problem is always restricted to CS3 captured footage. I convert from AVCHD to HDV (usually using Elecard, or Procoder etc) and find that if I stitch the output into a longish single HDV file then although that hdv file plays ok in a player, and is in sync - it loses sync when imported into PP CS3 - but is OK in other NLEs (well Vegas) Seems to me that CS3 cannot hold sync if (some) hdv clips are simply longish. Bad bug!- although seems it's being worked on according to similar threads

HT4972 I want to update my iPad OS, but don't want to loose the movies and apps currently on it. What can I do?

I bought the original iPad as soon as it was released. I ended up with lots of movies and apps for my kids. Now I want to update to the latest iOS. When I go to update it says that iTunes can do the update but will not save my apps and movies. I do not want to lose the apps or the movies. Is there a way to update (hopefully relatively easily) without losing the movies and apps?

If you had been syncing with iTunes all along, you should probably have a little better insight as to how this works.
Yes your device will be erased as part of the updating process. Your backup should be restored at the end of the update. But .... Be proactive anyway. As long as you do your part, everything should work out fine.
What you should do anytime that you update the device is to transfer purchases from the iPad into iTunes - File>Transfer Purchases - and you should backup the iPad as well. When you update the update the device, if something goes wrong, you can restore from the backup.
However, iTunes should ask if you want to backup before you update, but just in case create the backup yourself before you update. The backup contains your app data and settings - along with other items - so make sure you backup first.
If you have any other important files, you may want to transfer them to your computer as well, prior to the update.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
Here are the instructions for updating the iPad.
http://support.apple.com/kb/HT4972

I have a stupid black box that (not the canvas, its another box) my footage sits on top of in FCP 7. I didn't shoot it myself so I don't know what camera was used. I just don't want any black blocks above or below my video.

I was given this footage and did not shoot it so I do not know what else was done with it or how it was shot. Here is some info. According to quicktime the video, H.264 DV, 720 by 480 (640 by 480), Millions 16-bit Integer (Little Endian), Stereo, 29.97 fps,
In FCP it says the frame size is 480 by 270. Compressor Windows Media 9. 29.97 fps .
I can change the color of the box under the dropdown to white, checkerboard 1 or checkerboard 2. I changed it to white but when I playback it turns black again. Please help!

Your post contains terms that are inaccurate and inappropriate for a video editing application but I'm going to assume you've not really used FCP very much.
You have provided two mutually exclusive descriptions of the video. ONe is accurate, the other is impossible. Which one do we believe?
If you don't have Flip4Mac installed, Windows media is not likely to be decompressed at all. H.264 is difficult to play back in real time and almost impossible to edit unless you transcode to a more editor-friendly codec like DV. You can do that with Compressor.
You seem to have a scaling issue since FCP is trying to place your 720x480 clip into a 720x480 sequence but think the video is half that size and you have not told it to scale it up (which might not be a good idea) so the clip is sitting on a transparent background which FCP will show as black, white, or checkerboard. Either way, it's not really there.
You also do not seem to understand the difference between the canvas background, which does not render, and the background that is seen behind scaled clips that do not fill the frame.
Your post has lots of issues.
Let's try to basics again.
Since you didn't shoot the video, you need to talk to whoever gave it to you and try to determine what codec it really has been created in.
bogiesan

HT4994 what is import sim contacts option i don't want to loose contacts if sim is changed pls guide

Similar Messages

Maybe you are looking for