HT5012 Can I roll back to an earlier software?
Can I roll back to an ealier software.
If it is iOS you wish to roillback, that can't be done
Similar Messages
-
I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again! -
How can I roll back to an earlier version of OS 7 software
Can anyone advise me on how to roll back to an earlier version of OS 7?
I installed v 7.0 Bundle 2406 a few weeks ago and have had constant synch problems since. Most of these I have been able to fix by deleting 'problem' calendar appointments I have identified on the synch log. However, I have no idea how to solve the latest problem (see below). So I give-up and now want to roll back to ealier version which worked fine.
BlackBerry Torch 9860 software v 7.0 Bundle 2406. Windows 7
'An error has occurred during an attempt to access a device database record.'
Details below.
08:46:51.759 Engine waiting for user input - WPF message event raised for messageId 15003 Read 310 records
08:46:51.762 Engine working - message event complete for messageId 15003 Read 310 records
08:46:51.859 CBBTransBase::GoToRecord - Failed to get record FFFFFB45
08:46:51.860 Error Information: 18008 (00004658) (KnownErrorWithLocalizedText), Description: An error has occurred during an attempt to access a device database record., File: .\BBTransBase.cpp, Line: 736
08:46:51.860 CRSyncUtil::GetTranslator : FeedProfileShim2Trans (Loaded Trans) BlackBerry
08:46:51.860 CRSyncUtil::FeedProfileShim2Trans : returns 0
08:46:51.860 CRSyncUtil::LogFatalTransError : 'GoToRecord()' API of 'RimBB' translator for 'Contacts' application returned empty error
08:46:51.860 CBBTransContact::Close - Clean up temporary attachment files for contacts
08:46:51.862 CBBTransBase::Close - Mode: 4
08:46:51.862 CBBTransBase::Close - Committing change-log
08:46:51.862 CBBTransBase::Close - Save device database source information
08:46:51.976 CBBTransBase::Close - Close device database
08:46:51.976 CBBTransChangeLog::Close - Close change log db. Record count: 474. Db File: C:\Users\Bob\AppData\Local\Research In Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Translators\RimBB\Contract{8BCB53647E24F3BB61A8E73C4FDAB}.adt
08:46:51.990 Enter COLTransBase::Close - Mode - 4
08:46:51.991 End Sync with Error 2
Solved!
Go to Solution.Hello BobB10 and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having issues with your BlackBerry® Torch™ 9860 smartphone.
It is not recommended to downgrade your software, however, if you wish to do so you will need to consult your mobile carriers download site at www.na.blackberry.com/eng/support/downloads/download_sites.jsp and see if the previous software version is posted. If so, download and install it to your computer then use the BlackBerry® Desktop Software to install the older software version.
Hope this answers your question.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
I am using mulptiple tabs in groups - an excellent feature - this worked well in V6. Now I have upgraded to V7 when I closed down Firefox and relaunch it to takes a VERY long time - up to 30 minutes - to connect to all of the tabs. This is new. and before you ask, no it is not my Internet connection. If I launch IE8 it works perfectly!
Hello BobB10 and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having issues with your BlackBerry® Torch™ 9860 smartphone.
It is not recommended to downgrade your software, however, if you wish to do so you will need to consult your mobile carriers download site at www.na.blackberry.com/eng/support/downloads/download_sites.jsp and see if the previous software version is posted. If so, download and install it to your computer then use the BlackBerry® Desktop Software to install the older software version.
Hope this answers your question.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
HT1414 Can I go back to an earlier software on my iphone?
When prompted, I updated my iphone to ios6 when prompted but now it won't link with itunes because I can't upgrade my software on my imac beyond OS X 10.5.8
iOS 6 requires iTunes 10.7, which requires OS X 10.6.8 or higher. You will either need to upgrade your machine to 10.6.8 if it will handle it, or you will need to buy a new computer if you want to sync with iTunes.
The requirements are clearly stated on the web page and on the packaging for the phone. -
How Can I Roll Back my iTunes Library?
I'm guessing it may no tbe possible at all, but here goes.
What I would like to do with my music estate is roll back my current iTunes library file, automatically updated to iTunes 11 when updated on MPBr when this was my only PC using iTunes. Now I have three and some iOS devices too. My library has been moved from windows machines to macs and is several years old and has received 100s of hours of tweaking to get it just right.
Now my server is a PowerPC mac and I can only go as far as iTunes 10.6.xx, I want this to be always on and share the library with other PCs accross home sharing (i will sync iPhones over the wi-fi with this PC too, though it may not play with iOS7, so perhaps not).
I want to see the iTunes library on the macbooks, probably through Home Sharing, I also want to be able to sync the iphones, but only have a single copy of the music files on the server. is this possible? This will just be for when out of the house as I can also use home sharing in the house for music.
ThanksYou say you want to do this with multiple devices. Let's say you have a new iPhone 5 that requires iTunes 11. You will not be able to sync that if your base iTunes is iTunes 10.6 since your hardware will require at least whatever version of iTunes was current at the time of purchase. You're seeing this with your iOS7 phone. Anyway, unless all your hardware is old enough to use the lowest version of iTunes you need to run, you may be out of luck. You cannot share the library. Sharing media is different, and relatively easy, but it will be complex to ensure all the multiple libraries are kept up to date.
You also can't roll back iTunes libraries to earlier versions unless you kept a backup of your library from the point to which you wish to revert, or it is still in the previous libraries folder. -
Ever since I upgraded my Firefox to 4.01.1, everthing loads much, much slower.......I can go make a coffee while the page loads. Sometimes, it is soooooooooo slow, that it times out and I have to start all over again. Even when I sign on and load google, sometimes it takes forever.
I also do not like the toolbar at the top. It's grey and hard to read, what is wrong with white?
Can I revert back to the earlier version of Firefox? It worked much better. I use ancestry.com a lot and they even recommend a 3.??? version of Firefox.
Anything is better, so I don't have to sit and wait and wait and wait.Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again! -
I just updated my iTunes on 12-7-2012 and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.
To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes. -
My iPhone 5s can no longer use Internet on a wifi network. I've reset everything, how can I roll back to iOS 7?
i Was considerinf buying a macbook pro, but am reconsidering spending such an amount of money on a company that can screw up such a basic function. I mean you can have your iOS 8 back if this is what it means, I don't want to use your health Kit app.You cannot 'roll back' your iOS. That's never been supported or allowed by Apple (with only one exception).
Use this article: iOS: Troubleshooting Wi-Fi networks and connections - Apple
It's not the iOS. It may be a setting on your iPhone or the wi-fi network, or a hardware issue. But it's not the iOS. If it was, then everyone's iPhone 5S using the same iOS would not be working, and that's not the case.
Troubleshoot your issue. -
After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?
That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Can i roll back to Acrobat 9 Standard from Acrobat X Standard?
Can i roll back to Acrobat 9 Standard from Acrobat X Standard? I bought Acrobat X license and want to roll back to 9.
Thanks in advance.Do you have the Acrobat 9 Standard media?
Do you have an Acrobat 9 Standard serial number?
If not, then that's a non-starter.
You'll need to talk to Adobe provided that is who you actually purchased the software and not a reseller.
If yes, then it is a matter of removing Acrobat X first
Rebooting the machines
Then reinstalling Acrobat 9 Standard. -
I updated vietmobile remote files app. this app is broken on iOS 5.1.1 I do not have a backup of the previous version of the (paid) app, how can I roll back to the previous version? Is there a repository of previous versions? Am I boned?
Seems silly to not allow a rollback from a file repository of previous app versions.>All apps are tied to the account that downloaded it, so to be able to sync back the previous version you would need to still have your copy of that version
I'm not sure I follow, I have not sync'd the ipad with my computer. I just saw an update in the app store and took it.
I tried to del and install the app from the purchased tab in the app store, that reinstalled v2.1 of the app. This also fails to launch.
I have made two service requests to the developer, no response at this time.
Is there somewhere I can download and install Remote Files version 2 file? I can only find the new version 2.1 in the app store. -
I've recently had a notification on my Xperia T to say it had a software update available. So I installed it today. It's perhaps a bit more modern but it's terribly annoying. For a start it deleted the android browser with all of my bookmarks, which was pretty annoying, but mostly it's the way the keyboard works. I use the swiping method mainly and it worked everywhere and was very intuitive. The new one is garbage. For a start it doesn't work on Google and YouTube and doesn't offer close matches if you got it slightly wrong. Often it won't get basic words and doesn't offer alternatives. It's horrid.
Can I roll back the update (please say yes).So as far as I can make out. My first problem is the keyboard. When I used to type it would show alternatives in case a word was misspelled. This new one jumps straight to inaccurate predictions for what you type next, so if you've made an error you have to tap your way back to the misspelling. This is crap.
Also you get the full functionality of the keyboard on Facebook and forums and the url bar of the browser. But you don't get it on Google searches. So you start swiping and nothing happens. This is crap.
Could someone explain why you have different functionality of the keyboard on various sites, whereas it used to be one excellent keyboard for everything and also explain how this constitutes progress?
Cheers. -
How can I roll back from the latest update - hate it!
I can't get the quick WYSIWYG bar to show up. I want my old version back. How can I roll back?
I can't get the quick WYSIWYG bar to show up.
Not sure what that means. Can't you switch to Live View or Design View ? See screenshot.
In Creative Cloud desktop app, select Filters & Versions > Previous Version.
Nancy O. -
iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
- it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
More examples needed? (check out the communities and the reviews)
- OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
- iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
- iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
- Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
The list could easily extend to ...You can offer Apple feedback here: http://www.apple.com/feedback/
as for "
"@Apple, I want a $100 gift card for the inconvenience"
dream on.
Maybe you are looking for
-
I have created a Cross Site Publishing Environment in SharePoint Online. After connected to my catalog. 2 pages automatically created. But in "Category" page, if i click on an item it will bring me to the original path/item located in Authoring site.
-
HT1925 If I remove and reinstall will I lose all my songs????
If I remove and reinstll Itunes will I lose all my songs???? I have XP on my computer and am having alot of problems getting Apple Application Support back on etc
-
2 midi export-import problems...from l8 to l8!
1. l8 always exports/imports midi regions as their own tracks. the preference for "export single regions as type 0 files" is different from how it worked in l7 (1 track with several separate regions exported/imported as 1 track). when exporting an en
-
Hi. I have Photoshop CS6 running on Windows 7 Professional. I seem to be having a problem with my fonts when using the text tool. This doesn't happen all of the time, but it does hapen occasionally. When I chose the text tool and want to change the t
-
Sendori on OS X Lion and Safari Browser
Hi, I've mistyped urls on safari and it redirected it to a website called sendori.com and the site corrected the url. How ever, i have never downloaded and installed anything on to my browser of the toolbar variety. I run ClamXAv as my antivirus and