HT5012 How can you add a self signed CA Certificate to iOS 8?

How Can I add a self signed CA Certificate to an iPad with iOS 8.1?

I don’t think that I can help you but I am very interested in your question. Perhaps you have seen information about a related problem…
https://discussions.apple.com/thread/6590335
One way to install the self-signed CA certificate is to export it to a .CER file, email it to the iOS 8 device, open the attachment and process it. My guess is that the certificate will be installed (check the resulting profile) but due to an iOS 8 bug it will be ineffective.
Or, you could send a signed email from the email account for the CA. Open the email on the iOS 8 device and process it.
I assume your goal is for certificates issued by the CA to be automatically trusted on the iOS 8 device. Good luck with that.
The method I used was to send a .CER file. The CA certificate showed up as a profile. However, I do not get automatic trusting of certificates issued by the CA.

Similar Messages

  • How can you add a where clause using "OR" with applied ViewCriteria?

    [JDeveloper 10.1.3 SU4]
    [JHeadstart 10.1.3 build 78]
    I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
    "I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
    So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
    I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
    Toine"
    Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
    To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
    Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
    Thanks,
    Sandra Muller
    JHeadstart Team
    Oracle Consulting"
    Anyone knowing the answer or am I asking for an enhancement?
    Toine

    Hi,
    Can you SET your whereclause as follows ?
    ('Y' = <isAnd>
    and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
    OR ('N' = <isAnd>
    AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
    )

  • I have an ipod touch and the contacts icon is missing.  How can you add it to the home screen?

    I can't find the contacts icon... How can you add this to the home screen

    Every iPod touch has a contacts icon. It might be hiding. You can try Settings > General > Reset > Reset Home Screen Layout.

  • How can you add an image in Mail without being an attachment?

    How can you add an image in Mail without being an attachment?
    In otherwords I'd like to put my logo in the email not as an attachment but as an image.
    Is there a simpel solution to this problem?

    PBN1 wrote:
    How can you add an image in Mail without being an attachment?
    You don't.
    It's not possible. The e-mail protocol is designed for text; anything else has to go as an attachment.
    Different mail clients (such as Mail.app, the mail client bundled with Mac OS X) may have different ways of handling such attachments, but they are still attachments. Each mail client has its own rules and methods, so one may display a picture as if it were in the body of the message, but another client may do something completely different.
    A way of faking it is to format your message in HTML (which is a kind of text). The image is hosted on a remote server, not added to the message; instead, you include a link to it in the body of the message, as you would when building a web page. (This is also what the two tips helpfully provided by X423424X do, except that the link to the image is added in the signature, rather than the body of the message.) What exactly happens to it is, again, at the discretion of the mail client. In my case, for instance, displaying images in HTML messages is turned off, and will stay resolutely off.

  • HT5622 how can you add a group to contacts to email or message?

    How can you add a group to your contacts to email or message a group?

    There are example OMB commands in the MDL referenced in the post below;
    http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$198
    Look at the body of the expert you will see examples of creating joiners, filters, aggregators, constants etc all via OMB.
    Cheers
    David

  • HT5649 how can you add a previous playlist from a different apple Id  both belong to the same person

    how can you add a previous playlist form a different apple ID, both belong to the same person

    It's ok to share the same AppleID for iTunes.  Use Separate ID's for iCloud, iMessage, and Facetime. 

  • How can you add a 2nd i Tunes account on the same computer?

    How can you add a 2nd i Tunes account to the same computer?

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • HT201320 How can you add an email address in your email box in an ipad

    How can you add your e-mail address in you iPad mail box?
    Rita

    Go to settings.app -> mail, contacts, calendars-> click "add account"
    Hope this helped

  • How can I add facebook contacts in a group in ios 6

    Hi I need to know how can I add facebook contacts in a group in ios 6 without getting them in my contact list, thanks.

    They are automatically put in a group called Facebook, and your other contacts in another group...if synced from a Mac, they will be labled From My Mac. In the contacts app you can chose what groups are visible: Contacts>Groups...add or remove the check by touching the group.

  • Can you use a self signed certificate on an external Edge Server interface?

    Hi,
    I have a small lab deployment for evaluation purposes. The Lync FE server works great for internal users. I have now added an Edge server. For the internal interface, I have a self signed certificate from our internal CA. (no problem there) For the external
    interface, I have a self signed certificate from our own external CA. I have installed the cert on the client machine of the external user and installed it for trusted operation. I have used the RUCT and digicert tools to prove that the external self signed
    cert is valid (root and intermediate have been checked for validity).
    At first, when logging in from the Lync 2013 client on the external users machine, I would get an error from Lync about the cert being untrusted. I have now fixed that error by adding it as trusted. At this point, there are no errors or warnings in the Event
    Viewer (in the application or system logs) However, I receive the following error from the Lync client, "Were having trouble connecting to the server... blah, blah".
    Here is my question. Does the Microsoft Lync 2013 client and/or the "testconnectivity.microsoft.com" tool specifically prevent or forbid the use of self signed certificates on the external interface of an Edge server? They seem too.
    I can tell if the certificate is my problem or something else. Any ideas on how to trouble shoot this?
    Thx

    Drago,
    Thanks for all your help. I got it working.
    My problem with the Lync client error, "Were having trouble connecting to the server... blah, blah", was NOT a certificate error. It was a problem with my Lync Server Topology. (My sip default domain needed to match my user login domain.)
    Let me update everyone about self-signed certificates:
    YES, you can self-sign a certificate on your external edge server. It is a pain, but possible.
    I have a self signed certificate from our own external CA. I have installed the cert on the client machine of the external user for trusted operation. I have used the RUCT and digicert tools to prove that the external self signed cert is valid (root and
    intermediate have been checked for validity).
    Here are my notes:
    Create/enable your own external Certificate Authority (CA) running on a server with internet access. 
    On the Lync Edge Server, run the "Lync Server 2013 - Development Wizard".
    Click "Install or Update Lync Server System". (Lync will automatically determine its deployment state)
    You should have already completed: Step1 and Step 2.
    Run or Run Again "Step 3: Request, Install or Assign Certificates".
    Install the "Edge internal" certificate.
    Click "Request" button to run the "Certificate Request" wizard.
    You use can "Send the request immediately to an online certificate authority" option to connect to your internal CA, and create the certificate.
    Once the certificate has been created, use "Import Certificate" to import it.
    Once imported, on the Edge Server, go to: (Control Panel -> Administrative Tools -> Internet Information Services (ISS) Manager -> Server Certificates -> Complete Certificate Request...
    In the Lync deployment wizard - Certificate Wizard, "Assign the newly imported "edge internal" certificate.
    Install the "Edge External" certificate (public Internet).
    Click the "Request" button to run the "Certificate Request" wizard.
    Press "next"
    Select "Prepare the request now, but send it later (offline certificate request).
    Supply the "Certificate Request File" name and location. (You will need the file later. It should have the file extension ".req").
    Click next on the "Specify Alternate Certificate Template". (which means you are using the default options)
    Give it a Friendly Name. Bit Length = 2048. I selected "Mark the certificate's private key as exportable" option.
    Fill in the organization info.
    Fill in the Geographical Information.
    The wizard should automatically fill-in the "Subject name:" and "subject alternative name:' fields.
    Select your "Configured SIP domains"
    "Configure Additional Subject Alternative Names" if you want. Otherwise, next.
    Verify the "certificate Request Summary". Click next.
    Run the wizard script to "Complete". The wizard will create a file containing the certificate request with the file extension ".req". (Let's assume the file name is "myCert.req")
     Move your myCert.req file to your external CA. Have your CA issue the cert (based on myCert.req) and export the new cert to a file. I save it as a P7B certificate. (Let's call it "ExternalCert.p7b")
    In the Lync Deployment wizard - Certificate Wizard, click on "Import Certificate" for ExternalCert.p7b.
    Once imported, on the Edge Server, go to: (Control Panel -> Administrative Tools -> Internet Information Services (ISS) Manager -> Server Certificates -> Complete Certificate Request... (assign it a friendly name. Let's say "EXTERNAL-EDGE")
    For the "External Edge certificate (public Internet), click "Assign".
    The "Certificate Assignment" wizard will run.
    Click next.
    From the list, select your cert "EXTERNAL-EDGE".
    Finish the wizard to "complete".
    You are finished on the server.
    Move the "ExternalCert.p7b" file to the machine running the lync client. Install the cert via the "Certificate Import Wizard".
    When installing it to a particular Certificate Store, select the "Place all certificates in the following store" option.
    Browse
    Select "Trusted Root Certification Authorities"
    Finish the wizard.

  • How can you add images and text to UIScrollBar Component

    I can only add the text, can't add images. Also how can you make paragraphs out of long text in a UIScrollBar?
    Thanks.

    Hi,
    UIScrollBar Component can be attached to a dynamic text filed and the text field can be set to Render Text as HTML option which in turn can display both text & images(using <img> tags).
    Refer http://www.flashvalley.com/fv_tutorials/loading_HTML_in_a_dynamic_text_field/page2.php that may help you getting what do you want
    Thanks!

  • How can you "Add document" in shared documents without allowing editing the page ie Contribute?

    Hello Community
        Using SharePoint 2010 Server and the UI, when you click "Site
    Actions" - "New Site" and you create Team Site that that is a
    Sub-site. 
        When you create the Visitor, Members and Owners groups
    how can you allow the user to add a document while at the same
    time not allow them to edit the page when adding the document
    as the only permissions are Full Control, Contribute and Read?
        Thank you
        Shabeaut

    Hi Shabeaut,
    To create a new permission level, you should manage the Parent (site collection).
    Your current location is subsite, and it looks like it has unique permission(broke inheritance) that is the reason you are not able to see the create permission level. and another reason for seeing Inherit Permissions along with other menus in the ribbon.
    You should also see Manage Parent along with the menus you see when your site inherits permission from parent.
    So, go to your site collection and create a new permission level and assign users to it.
    And to assign permission level to your new groups, you will be able assign permission when you create a new group, along with the name, all permissions would be listed in the same page(_layouts/newgrp.aspx).
    see the below screenshot for more info -
    ->Site Actions menu-> Site Settings->Users and Permissions->Site ->Permission Levels.
    Hope this helps!
    MCITP: SharePoint 2010 Administrator
    MCTS - MOSS 2007 Configuring, .NET 2.0
    | SharePoint Architect | Evangelist |
    http://www.sharepointdeveloper.in/
    http://ramakrishnaraja.blogspot.com/

  • How can you add/change the currency rate in spro?

    Hi all,
    you can add a new currency code by going to spro --- general settings --- check currency codes
    for example: PERU ---> PEN
    But, how can we add/change the currency rate PEN in spro?
    for example: Peruvian Nuevo Sol     = 4,3567619
    Is it still in customizing? And if so, where can i find it?
    Many thanks in advance.
    Kind regards,
    Pamela.

    Hi Aman,
    I have entered the field to add the new currency rate.
    But the system doesn't want to valid my new rate.
    I get the following error message:
    "Input should be in the form ._,____ "
    Do you know how to override that command?
    Thanks.
    Regards,
    Pamela

  • How do I install this self-signed SSL certificate?

    I haven't been able to connect to the jabber server I've been using (phcn.de) for quite some time now, so I filed a bug report with mcabber. The friendly people there told me to install phcn.de's self-signed certificate, but I can't figure out for the life of me how to do that.
    I know I can download something resembling a certificate using
    $ gnutls-cli --print-cert -p 5223 phcn.de
    Which does give me something to work with:
    Resolving 'phcn.de'...
    Connecting to '88.198.14.54:5223'...
    - Ephemeral Diffie-Hellman parameters
    - Using prime: 768 bits
    - Secret key: 767 bits
    - Peer's public key: 767 bits
    - PKCS#3 format:
    -----BEGIN DH PARAMETERS-----
    MIHFAmEA6eZCWZ01XzfJf/01ZxILjiXJzUPpJ7OpZw++xdiQFBki0sOzrSSACTeZ
    hp0ehGqrSfqwrSbSzmoiIZ1HC859d31KIfvpwnC1f2BwAvPO+Dk2lM9F7jaIwRqM
    VqsSej2vAmAwRwrVoAX7FM4tnc2H44vH0bHF+suuy+lfGQqnox0jxNu8vgYXRURA
    GlssAgll2MK9IXHTZoRFdx90ughNICnYPBwVhUfzqfGicVviPVGuTT5aH2pwZPMW
    kzo0bT9SklI=
    -----END DH PARAMETERS-----
    - Certificate type: X.509
    - Got a certificate list of 1 certificates.
    - Certificate[0] info:
    - subject `CN=phcn.de', issuer `CN=phcn.de', RSA key 1024 bits, signed using RSA-SHA, activated `2009-05-04 08:26:21 UTC', expires `2014-04-08 08:26:21 UTC', SHA-1 fingerprint `d01bf1980777823ee7db14f8eac1c353dedb8fb7'
    -----BEGIN CERTIFICATE-----
    MIIBxzCCATCgAwIBAgIINN98WCZuMLswDQYJKoZIhvcNAQEFBQAwEjEQMA4GA1UE
    AwwHcGhjbi5kZTAeFw0wOTA1MDQwODI2MjFaFw0xNDA0MDgwODI2MjFaMBIxEDAO
    BgNVBAMMB3BoY24uZGUwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALqS+tnB
    tNruBGdcjw0o+BWSdfkKH4T3VpS7bkrsS0q7RD5iUIao7jH2lJqTk1TrLbQe28+R
    H0X9Ya+w22iYFea2l3wkrTnBfgdSZbRhpSxgVvC2QEBMoSrEQoRpo5lzXadRlob/
    RQ+rhu/cWCNeiRJzfkmNirPVEciGKQHrwKxxAgMBAAGjJjAkMCIGA1UdEQQbMBmg
    FwYIKwYBBQUHCAWgCwwJKi5waGNuLmRlMA0GCSqGSIb3DQEBBQUAA4GBALFBalfI
    oESZY+UyVwOilQIF8mmYhGSFtreEcUsIQvG1+cgD16glKehx+OcWvJNwf8P6cFvH
    7yiq/fhMVsjnxrfW5Hwagth04/IsuOtIQQZ1B2hnzNezlnntyvaXBMecTIkU7hgl
    zYK97m28p07SrLX5r2A2ODfmYGbp4RD0XkAC
    -----END CERTIFICATE-----
    - The hostname in the certificate matches 'phcn.de'.
    - Peer's certificate issuer is unknown
    - Peer's certificate is NOT trusted
    - Version: TLS1.0
    - Key Exchange: DHE-RSA
    - Cipher: AES-128-CBC
    - MAC: SHA1
    - Compression: NULL
    - Handshake was completed
    - Simple Client Mode:
    Unfortunately, the above command spits out more than a certificate. Do I need the additional information? If so, what do I need it for? Where do I need to put the certificate file?

    Hi,
    I recently found out a way how to install test or self-signed certificates and use it with S1SE.
    See:
    http://www.gtlib.cc.gatech.edu/pub/linux/docs/HOWTO/other-formats/html_single/SSL-Certificates-HOWTO.html
    Follow the instructions there
    1. Create CA
    2. Create root ca certificate
    Now install the root-ca-certificate in S1SE -> Security>Certificate Management and Install a "Trusted Certificate Authority".
    Paste the contents of the file: cacert.pem into the message-text box.
    Then restart the server. Now your CA-Cert should be visible in the Manage Certificates menu.
    The next step is to send a certificate-request from S1SE to your e-mail-address.
    The contents of the e-mail the server sends to you (certificate request) must be pasted into the file: newreq.pem.
    Now just sign the Request:
    CA.pl -sign
    The last step is that you have to paste the contents of the file newcert.pem into the message-box of the Security>Certificate Management - now under the option Certificate for "This Server".
    Then you have to reboot the server/instance again and it should work with your certificate.
    Regards,
    Dominic

  • How do i install a self signed server certificate

    After using the admin tool to generate a request CSR, how do I sign this myself for testing purposes so I can install it and therefore run using https?
    I have keytool and certutil both available on the system.
    My most recent solution was to cut and paste the request to www.thawte.com/cgi/server/test.exe and it would return a certificate that was good for 21 days. This however is not the solution I am looking for.
    Thanks

    Hi,
    I recently found out a way how to install test or self-signed certificates and use it with S1SE.
    See:
    http://www.gtlib.cc.gatech.edu/pub/linux/docs/HOWTO/other-formats/html_single/SSL-Certificates-HOWTO.html
    Follow the instructions there
    1. Create CA
    2. Create root ca certificate
    Now install the root-ca-certificate in S1SE -> Security>Certificate Management and Install a "Trusted Certificate Authority".
    Paste the contents of the file: cacert.pem into the message-text box.
    Then restart the server. Now your CA-Cert should be visible in the Manage Certificates menu.
    The next step is to send a certificate-request from S1SE to your e-mail-address.
    The contents of the e-mail the server sends to you (certificate request) must be pasted into the file: newreq.pem.
    Now just sign the Request:
    CA.pl -sign
    The last step is that you have to paste the contents of the file newcert.pem into the message-box of the Security>Certificate Management - now under the option Certificate for "This Server".
    Then you have to reboot the server/instance again and it should work with your certificate.
    Regards,
    Dominic

Maybe you are looking for