HT5019 Single display only

So i have an apple tv, iphone, and a mac pro. i know how to figure out to play the video on tv using my phone. but on my laptop it's saying the there's only single display and that i need a second display.

If your Mac is new enough, you can use AirPlay to display your Mac screen via your AppleTV. If you have an older Mac, you can get AirPariot that will provide the functionality.
Depending on your Mac, it should have the ability to connect an external monitor. It will most likely have either a DVI, mini-DVI, or mini-DisplayPort connector. Once you know the kind of graphics port on your Mac, you can get an adaptor and cable that will allow you to connect to an external monitor or digital TV. For example, I use a mini-DisplayPort to HDMI adaptor when I connect to my digital TV. I use a mini-DisplayPort to DVI cable when connecting to an external 24" monitor.

Similar Messages

Mass Display Only

Hello everyone.
I am cleaning up the Security work of someone here before me. We have _DEV roles in our QA environment. Management has indicated they want a single comprehensive DISPLAY only role create that covers all positions on the project team.
I have looked into turning the single roles display only, however time wise it isn't feasible.
I have looked for a single display only profile to use - did find many display only profiles - not sure if they cover everything I need.
Has anyone ever had to create a comprehensive display only role for an entire project team? I need two roles, one for BI 7 and one for CRM 7.
Is there an established best practice for creating mass display only roles?
Would love to hear your advice and opinions.
Thanks,
Todd

Hi Todd,
please try to find an answer using the search function in this forum. there have been many threads already regarding display-only roles (maybe a good entry point for you would be to search for sap_all_display).
If you have specific issues (not such a general question....) please update.
Thank you.
b.rgds,
Bernhard

Only "single display" possible

i have a problem with my gf4 mx440!
everything runs fine on my old pIII800 but i cant clone my desktop to my tv! i alway got to change my primary monitor to watch films on it.the only option i have is "single display" under nview! i already changed my drivers and tested version 61.77,66,93 and 67.02 (guru3d.com) but no change....
any suggestions? i want to clone my monitor and my tv!!!

Uhm i've a similar problem but ......
I've a Msi Gforce 6800GT 256Mb. Till 1 week ago i had tvout connected to my tv and Dsub connected to my analog monitor . All was working right, Clone mode or dual view were working perfectly and i could see films on tv and playing a game on monitor. At the same time.
Then after formatting everything changed.
1° - The dual view mode is no more avaiable
2° - If i try to set the clone mode, it set the new mode, and start the usual 15 sec countdown to revert the setting if anything went wrong but .... it revert to single display mode if i press "yes" or if i press "no" or if i wait the 15 sec timer.
3° - Underd the troubleshooting window the "my connected tv is not being detected" check is disabled .
4° - If i set single display mode on tv, it work but ..... all settings for tvout output like composite or s-video are absent :-/ just empty cascade menu. The video on tv is show correctly ... well just b/w but i know how to solve it.
Before the format i was using nvidia 66.93, and after it i tryed both 66.93 and 61.77. I'm using Wxp pro with sp1a and all security updates. About the virus, don't worry, completely deleted and re-downloaded all drivers.
Reading previous posts i'm going to try the driver cleaner 3 but don't think can solve my problem.
Any hint for this situation is wellcome :D
Edit : I apologize for this useless post because, after posting here, i tryed to install msi 71.22 drivers and they rock !!! :D All work perfectly like heaven.
Sorry again for the useless post.

Contents of events folder suddenly displaying single pictures only, not a thumbnail of all photos, what has happened?

Suddenly the contents of the events folders in iphoto is displayed with single pictures only, and not thumbnails. I wasn't aware I had changed any settings, but having looked at all the settings I cannot figure out how to change the display back. Anyone know what has happened?

Does the zoom slider down left of the iPhoto Window help?
Regards
TD

The software i use to play video cause for multi display in which my Macbook pro has only a single display. Is theres a way to get a multi display added to to my computer

The software i use to play dj music videos cause for multi disply in which my Macbook pro has a single display funtion. Is the ant way to get multi monitor display added to my computer

If the monitor can be detected your Displays preferences should show it in its Arrangement panel. You may have to play around with your Display panel to get the desired resolution. And also may have to click detect displays and gather windows to see both sets of preferences on your main screen.

In report i should have to display only single country

Hello..
In myreport its dispalying company,costelemt and many more fields,users want some changes they have to display only one country and also courency also.they should have to enter the country name starting letter.
thanks...

If they want only one country you should give them the possibility to filter the country......put country characteristic in Free Characteristic Panel ....this give users ths possibility to make a drill down and filter according to country...
I hope this helps you

Display only single value

Greetings,
Given my dimension <course section> and measure object <Billable Hours> etc.
When a given course section meets multiple times and/or has a lab my report doubles the billable hours. doubles e.g. instead of 4 billable hours, the report displays 8 billable hours.
I tried the following formula w/ ranking w/o any success.
=If([Billable Hours] = Min ([Billable Hours]) In ([Section ID])) Then "1" Else "0"
How can I get my report to display only 4 billable hours?
TIA,

Greetings,
I tried the above formula suggested by Jothi, but when I drag my variable to my report, it displays 1 across the board..
Anuj, in the attached screenshot BIOL-101 shows 8 billable hours, but in actuality it’s only 4 billable hours. T
he billable hours usually doubles and/or gives wrong result for the following reasons:
When the course has multiple sections
When the course has a lab
My requirement is to display 4 billable hours for BIOL-101 in the sample.
TIA

How to set Display Only for some records in CAT2 Worklist

Hi,
I have a requirement to modify an attributes for some records in the Worklist of CAT2.
We have an external system where we book our time. Weekly we import data from that external system into CATSDB using BAPI for every single employee.
We would like when the user wants to modify his time sheet to be able to add/modify all records except those which were imported from the external system. Which means that those records should be in Display only mode / grayed out / before release.
Is there any user exit or BADI that could help to modify that attribute and that will be triggered before displaying the Worklist ?
Please advise !
Thanks,
Stefan

I've solved the problem.
First I've added customer field in CI_CATSDB structure and when I am importing the data I am populating that field with 'X', which means that this is record from the external application.
I've created enhancement implementation in Function group->CATS, screen->2003 MODULE->D2000_MODIFY_LOOP, subroutine->modify_d2000_loop where I am checking the field mentioned above if it is 'X' I am modifying the screnn-output = off.
It works, thak you for your help.
Regards,
Stefan

Display only positive values for a particular Keyfigure

Hi..
(Sorry, I accidentally posted this also in Datawarehousing forum, actually it related to BeX forum).
For a particular column(keyfigure) in my report, the user wants to display only positive values.
I used the formula from the one of the forums
(Keyfig > 0)* Keyfig.
This displays only positive values in the column as required. But, the result for this column is also affected. As the result is negative, it shows, zero in the result for this column.
Is there a way in which the result will not be affected by the formula?
I went into the properties of the particular keyfigure and chose Calculate Result as -> Summation.
It throws out the following error message
'Calculating result as...' was not executed
Message no. BRAIN141
Diagnosis
The function 'Calculate Results as ...' could not be used in all
instances.
The recalculation of a result cell always occurs based on the set of
detailed cells subordinated to this cell. This is the most detailed
level of the drilldown. Therefore it is not posible to recalculate in
hierarchical lists. The calculation of a results cell is not performed
if a cell or column with an expand symbol is assigned beneath it.
Otherwise the newly calculated result is changed every time one of its
lower-level nodes is expanded. This is not supported for technical
reasons and would also only confuse users.
Note, however, that calculating with "Suppress Results" is always
executed because the restriction described above does not apply in this
case.
NOTE:
The query shows the keyfigure values for a selected title, for profit center and territory hierarchies.
Any suggestions would be greatly appreciated.
Thanks,
Sai.

Hi Deepu,
Thanks for the reply. I tried with ur formula.
LEAF(keyfig) gives all values "zero" for that particular column including the result.
NOT LEAF(keyfig) gives all values "one" for that particular column including the result.
So, ur formula gives the same values as of the present column values.
I tried condition, but it's not working...it says the following errors...
There is a condit. on Title, results row suppress. active on Profit Center
(conditional
Message no. BRAIN144
Diagnosis
Characteristic Title has an output condition and the 'Suppress Results
    Cells' property is active for Profit Center. This generally leads to an
    incomprehensible output list.
System response
As soon as an output condition is defined for a characteristic (here
    Title), the system calculates the corresponding result cells and applies
    the output condition. If a result cell of this type is later deleted by
    the condition, all the lower-level detail and result cells in its
    drilldown are suppressed. Because the result cell is suppressed the
    Title rows are then omitted from Profit Center.
In extreme cases this can lead to an entirely empty list being
     displayed, although the single rows or columns would be displayed if the
     condition were deactivated.
Procedure
Check the query settings, especially results row suppression and the
     output conditions.
Procedure for System Administration
You can deactivate this message Brain 144 with transaction RSRT1.
There is a condit. on Profit Center, results row suppress. active on
Territory as in SPL (conditional
Message no. BRAIN144
Diagnosis
Characteristic Profit Center has an output condition and the 'Suppress
    Results Cells' property is active for Territory as in SPL. This
    generally leads to an incomprehensible output list.
System response
As soon as an output condition is defined for a characteristic (here
    Profit Center), the system calculates the corresponding result cells and
    applies the output condition. If a result cell of this type is later
    deleted by the condition, all the lower-level detail and result cells in
    its drilldown are suppressed. Because the result cell is suppressed the
    Profit Center rows are then omitted from Territory as in SPL.
In extreme cases this can lead to an entirely empty list being
     displayed, although the single rows or columns would be displayed if the
     condition were deactivated.
Procedure
Check the query settings, especially results row suppression and the
     output conditions.
Procedure for System Administration
You can deactivate this message Brain 144 with transaction RSRT1.
Thank you very much.
Regards,
Sai.

Displaying only the luma channel in Speedgrade when using direct link. Is it possible?

Hi!
The idea here is to be able to display only tle the Y (luma) channel i preview window of Speedgrade. I know that this is possible when grading in a new crated project in Speedgrade.
Timeline/View/Channel Display. I know that there are shortcuts to display the separate RGB channels but there is no short cut to display the isolated luma.
Do You guys know if there is a solution to customize shortcuts in Speedgrade? Or is there another method to display the luma when working in SG on a directlink created project?
The reason for this is a project thats supposed to be graded in BW with an ability to manipulate colors/channels values underneath the bw display. Because after adding the BW "filter" or decreasing the saturation value all of the controls become "some sort" immune to color data below the bw grade witch gives no ability to preform corrections to particular channels/ colors with live preview in BW. Of course we could try to desaturate the monitor but turning the colors back and forth every time would be a coffin nail in production time
Any hints greatly appreciated.
Cheers Max

Hey Max,
Correct me if I'm misunderstanding your issue, but I believe Speedgrades layers apply effects linearly based on the information passed to them by the layer directly below. Could you achieve your solution by using two (or more) primary layers, with the bottom layer being used for manipulating colours, and with the top layer to desaturate?
If switching back and forth is important, you could add a single effects layer over the entire projectt on a track above, and then just apply a primary that desaturates to that effects layer. Then you could just switch it on and off by toggling the visibility of the track.

The input or display only attribute of table contorl fileds

HI,experts
in the program there is one parameter p_recount.
in my table control ,there are 5 columns, f1 f2 f3 f4 f5
f1 f2 f3 is display only, and if p_recount = 00.,f4 f5 may input but if p_recount != 00.
f4 f5 also display only.
and when i push the "new" button,all the 5 fileds are input fields.
when i use LAY OUT to set attributes for the fields,the input/output attributes may not change
i think.
if there is some way to do this in the program use code?
how to do this?
thank you very much!
Edited by: hongtan zhang on Sep 15, 2008 9:11 AM

Hi you group the fields F1,F2,F3 in a single group1 named 'GP1'. and f4,f5 in group 'GP2'..
you also create a another group 'GP3' having all fields.
now in PBO.
loop at <i_tab> with control <tc-con>.
module modify.
if ok_code = 'NEW'.
loop at screen .
if screen-group2 = 'GP3'.
screen-input = '1'.
modify screen.
endif.
endloop.
endif.
loop at screen .
if screen-group1 = 'GP1'.
screen-input = '1'.
modify screen.
endif.
endloop.
loop at screen .
if screen-group1 = 'GP2'.
screen-input = '1'.
modify screen.
endif.
endloop.

Making a field as display only in custom Infotype.

Hi,
I have to a requirement to make a field as display only in a custom infotype. This field should be greyed out while entering data via PA30 for any employee such that it wont allow to eneter data manually but it gets updated by a program. And also this field should have a default value , say, NO.
Please help me as this is too urgent.
Regards,
Binay.

Hi Binay
Please go to Screen Painter SE51 for your custom infotype program MP9XXX00
9XXX - infotype number.
Go to Layout editor for your Single screen (Screen Number 2000)
Double click on the field you want to make display only
In the screen attributes DISPLAY OPTIONS for that field choose "Output Only"
Activate Layout.
If you want to code something to be populated for the field code in PAI or PBO modules in the Module pool program
Its very easy.

Duke's bookstore2 displays only one book title

When I run Duke's bookstore2 from the Tutorial (Chapter 12: JavaServer Pages Technology: The Example JSP Pages), I'm not getting any error messages, but instead of seeing the graphical "Duke's Bookstore" heading followed by a horizontal line and "Please choose from our selections:" the only display I'm actually seeing at http://localhost:1024/bookstore2/bookstore is this single link:
"Web Components for Web Developers,"
and when I View Source for the page, I see only this:
<fmt:message key="What"/>
[actually 5 lines of space here]

<c:url var="url" value="/bookdetails" />
<blockquote>Web Components for Web Developers,
<c:url var="url" value="/bookcatalog" />
<fmt:message key="Talk"/></blockquote>
<fmt:message key="Start"/>
It seems to be displaying only the contents of one data set, rather than the data for all the books as part of a complete HTML page. (But when I open the pointbase console and "select * from books;" I see details for all 7 books in the table. So the full table is populated in the database.)
When I click on that single link, I go to this URL:
http://dar2000:1024/bookstore2/bookstore?bookId=203
where I still see only one line with that one book title and nothing else on the page.
Any suggestions? Thanks!

Actually, I did add the prelude and coda pages in the JSP Properties tab.
But, when I entered "/*.jsp" under URL Patterns on that same JSP Properties page, I did not erase first the "/URL_properties" that appeared there by default, so I ended up with "/URL_properties/*.jsp" in that field.
When I reduced that to "/*.jsp" the complete page displayed, including the bookstore header, clock applet, Start Shopping link, copyright info, etc.
Stephanie, thanks!

How to force carraige return in display-only item

Can I somehow force a carraige return in the text for a display only item? Aesthetically, I'd would like to have strategically-placed line breaks.
Thanks,
C

Scott -- Sorry, I posted the wrong example entirely. Here's the assignment statement. If it isn't clear I'll try to put an example on apex.oracle.com... which I've not done before, so would be another learning experience :)
:P1_MESSAGE_1 := 'my display text line1 my display text line2';
My assignment statement is exactly the same format as what you posted on
Jul 29, 2008 2:51 PM, with the space after the opening bracket removed, as you
indicated it should be.
:P1_MESSAGE_1 is a display only, saves state item. After the assignment
statement (and submit), what is displayed is exactly what's in the single quotes, including the brackets and the "br" -- the html doesn't appear to be recognized as such:
Item display is: my display text line1 my display text line2
Does this clarify what I'm doing?
Thanks,
C

Need to display only leaf and not the node using tree table

Hi,
Am using Jdeveloper 11.1.2.0.0 . As per requirement , am having Department - Employee View wherein Department is the parent considered as node and Employee as a child which is considered as a leaf. Having dragged and dropped the DepartmentView as a tree table -> shuttle department id and department name to be displayed -> added EmployeeView to the same and shuttled employee id along with the first and last name. so this works as it has to be in the below structure...
10 ADF
256 A
257 B
258 C
20 JAVA
259 D
260 E
Code for the same ..
<af:treeTable value="#{bindings.DepartmentsView.treeModel}" var="node"
selectionListener="#{bindings.DepartmentsView.treeModel.makeCurrent}" rowSelection="single" id="tt1">
<f:facet name="nodeStamp">
<af:column id="c1">
<af:outputText value="#{node}" id="ot1"/>
</af:column>
</f:facet>
<f:facet name="pathStamp">
<af:outputText value="#{node}" id="ot2"/>
</f:facet>
</af:treeTable>
*Here comes my requirement , need to display only the leaf nodes which has employee name [Employees] and need to hide the node [Department] in the below structure....*
256 A
257 B
258 C
259 D
260 E
Things tried to achieve the requirement....
1. Got only the EmployeeName in the nodeStamp facet as below. Hence am getting only Employee name but the issue is am getting the icon for the node [Parent - Department]. Now how do i hide the same.
<af:treeTable value="#{bindings.DepartmentsView.treeModel}" var="node"
selectionListener="#{bindings.DepartmentsView.treeModel.makeCurrent}" rowSelection="single" id="tt1">
<f:facet name="nodeStamp">
<af:column id="c1">
<af:outputText *value="#{node.FirstName}"* id="ot1"/>
</af:column>
</f:facet>
<f:facet name="pathStamp">
<af:outputText value="#{node}" id="ot2"/>
</f:facet>
</af:treeTable>
Please do suggest some solution....
Thanks and Regards,
Vinitha G

Hi,
Thanks for the reply. As the project has already implemented tree table they do not wanna change any logic written for the same. So they wanted to just display only the leaf node data using treetable component. Can you please suggest.
Thanks and Regards,
Vinitha G

HT5019 Single display only

Similar Messages

Maybe you are looking for