HT5022 10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"
10.8.4 is throwing an error with this software: "Airport Utility cannot be installed on this disk. The version of Mac OS X on this volume is not supported"
You are trying to install a version of Airport Utility earlier than 6.0, correct? If so see the following: Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Similar Messages
-
I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?
Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha -
Hi, I am new comer of Apple products.
I have a Imac (OS 10.8.2) and just bought a Time Capsule (2T). I have trouble to install it.
anyone here could help me?
I have downloaded the untility 5.6, during the installation, the message "the version of Mac OS X on this disk is not supported".
what I should do next.
thanksYou have Airport 6 right in the Utilities folder already.
5.6 will not install in ML after the upgrade to ML. -
Trying to update airport express by downloading Airport Utility 5.6 (which it says I need). When installing I get an error message, "...version of Mac OSX on this volume is not supported." What does it mean/what do I do?
For OS X Lion, you need to download this version directly from Apple Support Downloads.
-
After starting airport utility, it searches and i select my time capsule. AU grinds for a minute and comes back with "An unexpected error occured. Try again."
Hi Philjp,
If you are having issues connecting to your Airport Time Capsule, even after a factory reset, you may find the following article helpful:
Apple Support: AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
Regards,
- Brenden -
My creative CC for teams gives an error code (-60) download corrupted when trying to install any app from the CC on my desktop. Any help?
Rasco1 it sounds like your managed network needs to be configured to allow you to download successfully. You can find more details in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
Why do I get this error message "This volume does not support permanent version storage."
I get this error message when I save a "pages 09" document edited on my macbook pro but saved to my mac mini (over a wifi network). All my Macs are running 10.9.3. My Mac mini is using time machine to back up to a separate hard drive (USB 3 connection). I Tried using Page 5.2 but it is a disaster over my network, slow, crashes, creates random folders....
According to Apple network volumes do not support built in 'versions'…
OS X Server: "The document 'file name' is on a volume that does not support permanent version storage" alert
If in doubt Google the error text with any personal info removed.
Work on it locally & copy it to the network daily if you need versions, otherwise use a real 'version control system' that you have some actual control over like GIT. It is designed for code projects, but you can cram anything in if you really want.
http://www.git-scm.com
I suspect Apples file format will make it miserable with Pages, but there are some great Mac GIT apps.
Using Time Machine would be probably be suffice (run it on the Mac you use as the server & then restore versions on that Mac). -
Hi!
I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.Disable the computer's firewall and antivirus during the download and update.
-
After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has multiple user accounts. Any help would be appreciated. I renamed the drive to its original name but to no effect. RR
I resolved the issue.
The problem is indeed a permissions issue with the Adobe Application Support folder.
First, in MAC OS Lion the ~/Library/ folder is hidden by default. You must unhide it in order to proceed. (if it is already visible in your ~/User/ folder, proceed to Step 4.)
Next launch the Terminal application.
At the command line, paste the following command line: chflags nohidden ~/Library/
Go to /Users/youruserid/Library/Application Support/Adobe
Get info on the ~/Adobe folder and reset your permissions to read/write and apply to all enclosed folders
Problem solved. RR -
Trying to download creative cloud app and this message pops up. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. (Error code: 22)
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
Hi,
I've created a storage pools of 44x 1TB SAS, my storage pool name is "DAS" with 39.1TB (35.8 TB Free Space)
I have a virtual disk named "iSCSI_DFS", Simple, Thin, 20TB with 3.05 TB Allocated
I've created volumes on that disk, NTFS, Thin, Different size.
I create iSCSI VIRTUAL DISKS on those Volumes, same size (my volumes are full)
I want to "extend" my volumes size... I click on my volume, Extend Volume, enter a new size (current is 162GB so I enter 200 and select GB) and click OK
The Volume status turn to "Extend failed" with "Error extending volume: Size Not Supported"
Can you help? I need to change my volumes size...
ThxI also could not get my partition to extend using the new Windows Server 2012 interface. Did you try to extend volume from the "computer management", "disk management" console? Get there from Administrator Tools - Computer Management. I
was able to extend my partition only from there. You need to first make sure you have available space on the disk. I had to delete an empty volume first before I was able to extend the partition. Hope this helps. Anthony :)
Thx !!
While in the Computer Management, I realised that my Disk was "Basic" and not "Dynamics", Extending using the Disk Management suggest to switch to Dynamics, and it's now working.
The error in the Server Manager should be "Unable to Extend : Your disk is Basic" or something like.
The Disk is a virtual disk on my Storage Pools.!!! -
Its throwing an error with order related billing
hi,
sap gurus,
in order related billing configuration settings its throwing an error like this
"the items is not relevant for billing".
plz show some way on this its urgent
tommorrow is my delivery time
regards,
balaji.t
09990019711Normal Sales Order Cycle for Order Related Billing:-
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
Check Billing relevance for Item Category being used
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
For Order-Related-Billing, use Item Category TAD & Item Category Group in Material Master as LEIS.
Schedule Line:
1. Define Schedule Line Categories: If possible use Standard Schedule Lines. Incase if required to create new, copy as from standard & maintain New.
2. Assign Schedule Line Categories: If possible, use standard. Formula for deriving Schedule Line: Item Category + MRP Type / No MRP Type.
Step 2:
IMG > Sales and Distribution > Billing >
1. Define Billing Types: If possible use Standard Billing Type. Incase if required to create new, copy as from standard & maintain New.
2. Define Number Range For Billing Documents: Ensure to maintain number range.
3. Maintain Copying Control For Billing Documents: Maintain relevant copy controls such as Sales Order to Billing, Deliver to Billing, etc.
Note: Ensure that Copy Control settings are done
Sales Order to Billing (OR --> F1): VTFA
Regards,
Rajesh Banka
Reward points if helpful -
I have an older airport express that cannot be configured with 6.2. I have tried to install 5.6 as instructed on 2 computers, both with OS 10.7.5 and in both cases repeatededly get an error during installation saying to contact software manufacturer.
Catch 22. Apple is the software manufacturer, so you may need to contact them for this specific issue.
AirPort Utility 5.6 will not install on Mountain Lion 10.8.x either, using Apple's installer. But, there are several workarounds that seem to allow this.
One of them is discussed in this article:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
I do not have a Lion 10.7.5 Mac here to test, but can say that the workaround does work on Mountain Lion for me. Follow the instructions in Pacifist to manually "extract" the AirPort Utility 5.6 application and install it in the Utilities folder on your Mac.
It might work on Lion, if you want to give it a try. Otherwise, if you do not want to contact Apple, you could use another Mac....if available.... running an earlier operating system to configure the Express. Even a PC would work for the same purpose. -
I tried following the article's instructions by going into System Preferences / Network and changing the configure ipv6 tab to Link local only and I STILL am getting the same error. Can someone please advise how to get this ariport extreme back online and configured
I'm in a frustrating predicament with this error, so if folks have any suggestions, that would be greatly appreciated...
A few days ago my internet stopped working as best i know out of the blue (3rd gen Airport Extreme with a couple iPhones, iPad, Apple TV's, Mac's (one with Mavericks) on it). In trying to fix it, I powered down everything and reset the router. When the router is initializing (seen through the Airport utility), the internet starts working again on the Mac in which I'm running the Airport utility. (a browser in background loads a previously unloadable webpage). I'm then left with a screen where the Airport utility is waiting for me to enter set-up info:
If I leave the Airport Utility in this state and don't hit next, my internet works fine on my Mac. If I set-up this info, however, my internet no longer works (in Airport Utility the Internet globe has a orange circle saying internet disconnected) and I get a screen saying "An unexpected error occured. Try again." I've tried toggling a number of router settings, restarting the router, but nothing seems to fix it.
I've taken the router to Apple, where they were able to create a network fine with the router. I also bought a new AE router, and tried an old AE express router, but all attempts get the same error. I've also tried using the iOS Airport utility, but that doesn't seem to help. I've tried the older version (5.6) of Airport Utility run on a non-Mavericks Mac, but that didn't help.
I had a ISP technician come out, but they basically said the plug (we don't have a modem, but just a ethernet plug in our apartment) in which you're getting the internet from us is working, and it's your router. They're diagnostics said the router is 'throwing off a bunch of errors.' That being said, they've confirmed the setting on the AE are okay (as far as they know...).
Any thoughts here? I'm not especially network-proficient, but searching around has pointed me to potential issues with mavericks, IPv6, and the latest version of the Airport Utility.
I'm desperate - please help!
Much thanks in advance. -
Hellooo Apple Community!
I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
Thankyou thankyou thankyou!
Natalie.I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.
Maybe you are looking for
-
Hp officejet pro 8600 doesn't work with yosemite
Dear, I've installed yosemite on my mac and now scanning doesn't work, there isn't the scanning button in system/print and scan like before installing yosemite! I've tried to delete and reinstall driver (also update driver from appstore after install
-
How come my premiere pro is not downloading
I downloaded creative cloud for my mac pro and now the premiere pro is not downloading
-
Find Sales Order Number for teh combination of material and serial number
HI Friends, Can you please tell me how do i find out the sammes order number for a combination of material number and serial number. I need to make technical specs for this. Can you guys help me give soem idea ! Thanks in advance for your help !
-
Error when copying the folder Manager Self-Service in the portal
Good Night. I am implementing Employee Self-Service and Manager Self-Service For ESS i did the following: 1. I created a new folder for my project. 2. I copied Employee Self-Service folder from the standard part into my folder. 3. I deleted the p
-
Person responsible based Authorization in Projects is not working for me
Hi, Does 'Person responsible' based authorization for WBSE works for the WBS element only, or for the hierarchically sub-ordinate non-WBS objects (meaning Networks, Activities, Materials etc) as well? Details: (Authorization objects: C_PROJ_VNR and C