HT5022 Airport Utility 5.6 does not fix the old Airport Express!

My old airport express does not work anymore - the Airport Utility 5.6 makes changes but after re-starting, the Airport Express cannot be found. Now I am forced to buy a new one. Not good (and sold out as many experienced the same apparently)

Do you get any sort of error message when you try to install, and if so what does it say?

Similar Messages

  • HT1925 My computer no longer recognises my iphone and can't be seen on itunes. My ipod works perfectly on the same computer. rebooting my iphone and PC does not fix the problem.

    When I connect my iPhone to my PC it is not recognised and iTunes does not open. When I connect my iPod to the same PC everything works perfectly. I conclude that the problem is not on the PC or with iTunes. Switching off and rebooting the iPhone and the PC does not fix the problem. Any suggestions??

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I contiue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing.  Please reinstall itunes.  Reinstalling itunes does not fix the problems

    I continue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing.  Please reinstall itunes.  Reinstalling itunes does not fix the problems

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • I cannot download and use ITunes successfully.MSVCR80.dll is missing. Reinstalling does not fix the problem.

    I cannot download and use Itunes successfully. Message MSVCR80.dll is missing. Reinstalling does not fix the problem. I also get a error 7, Windows error 126.
    How can I fix this?

    Solving MSVCR80 issue and Windows iTunes install issues.

  • I have iMove 11 and photos turn very dark when I drag  them into the project. Changing colour white balance does not fix the problem.

    I have iMove 11 and photos turn very dark when I drag  them into the project. Changing colour white balance does not fix the problem.

    Thanks for your no help line.

  • PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver.  Deleting bad driver file in adobe program data does not fix the problem,  it simply replaces the text file and crashes again.  My video driver

    PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver.  Deleting bad driver file in adobe program data does not fix the problem,  it simply replaces the text file and crashes again.  My video driver is just fine.  Any help out there?

    rb
    Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
    For those with the display card error, the answers include
    a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
    if necessary consider a driver roll back.
    b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
    c. delete the BadDrivers.txt file
    the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
    Re: Premiere Elements 9 Tryout Serious Display Problem
    Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
    When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
    ATR

  • I have a new time capsule (replace my old time capsule).  I want to erase my old one.  My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

    I have a new time capsule (replace my old time capsule).  I want to erase my old one.  My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem).  I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge.  So,
    1.  why doesn't my cmputer see the old TC
    2  once i have solved that, how do I erase the old one
    3.  Can I use the old one as a supplemental hard drive
         a.  wired?
         b. wirelessly?
    4.  Can I use the old one as a range extender?
    I know .. a lot of questions but I would appreciate any help.
    Thanks

    sgetraer wrote:
    I have a new time capsule (replace my old time capsule).  I want to erase my old one.  My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem).  I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge.  So,
    1.  why doesn't my cmputer see the old TC
    2  once i have solved that, how do I erase the old one
    3.  Can I use the old one as a supplemental hard drive
         a.  wired?
         b. wirelessly?
    4.  Can I use the old one as a range extender?
    I know .. a lot of questions but I would appreciate any help.
    Thanks
    1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
    To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
    Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
    2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
    3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
    Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
    4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

  • I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

    I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

    Hello farahani hairon nizar,
    If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information. 
    If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/en-us/HT203828
    Regards,
    -Norm G.  

  • I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

    I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

    What OS?

  • Adobe flash keeps crashing and reloading and changing timeout per your instructions, does not fix the problem. What else can be done?

    I recently upgraded Firefox and now I cannot use it if I want to watch something involving Adobe Flash because it crashes. I read your article and made sure I am up to date on all programs through Firefox check page. I reset the timeout on the adobe flash to -1 per your article. Your article states it may crash and just re-load it. I have done all your advice and it still will not run. I am now using Windows as my default browser because I don't have time right now to research this on my own and solve it. I don't know if you are aware that the fixes you suggested are not fixing the problem.

    Try reinstalling the previous version of Flash - 10.1 r 102 and get rid of that 10.2 r152 version. ''I never updated Flash and I haven't had a problem with Firefox 4.0 on WinXP.''
    http://www.oldapps.com/flash_player.php?old_flash_player=19 <br />
    scroll down to <br />
    Download Flash Player 10.1 (Non-IE Browsers)
    or from Adobe <br />
    http://kb2.adobe.com/cps/142/tn_14266.html

  • HT201250 what do I do if my passport for mac does not delete the old files when the disc is full

    What do I do  if the time machine does not delete the oldest files on my passport for mac. I get the message backup failed not enough disc space available

    See Pondini's TM FAQs, for starters.

  • OS X Mavericks v10.9.4 Update still does not fix the wifi shut off in sleep mode problem

    OS X Mavericks v10.9.4 Update was supposed to fix the wifi connectivity problem with my iMac. Wifi disconnects in sleep mode and does not connect when awakened.  Must reconnect manually every time. PITA.

    Your observation is correct about wifi disconnection in sleep mode. That is normal, you may want to check to see if your Mac supports Power Nap/is enabled- OS X: About Power Nap
    The reconnect should be automatic within a few seconds.
    Does it happen with multiple wifi networks or just one?
    Have you tried deleting and re-adding the wifi network?

  • My iPhoto has a constant spinning pinwheel. Even Forced Quit does not fix the problem. Any advice?

    My iPhoto has been doing this for the past 4 days. The pinwheel never goes away. I have forced quit countless times and still it does not work. I have looked all over the internet but have yet to find a solution that makes my iPhoto usable again. Can anyone help? Thank you!
    A little background: I have a feeling I started the problem as I pulled out my camera's memory stick in a rush before I had ejected it on the iPhoto program.

    You tv probably has 2 seperate inputs, DVI and HDMI. You will need one these adapters if you want to connect via HDMI however on a machine as old as yours neither the  HDMI or DVI will only output video, not audio.
    http://store.apple.com/us/product/M9321G/B/apple-mini-dvi-to-dvi-adapter?fnode=5 1
    If you want to use the HDMI you will need:
    http://store.apple.com/us/product/TY600VC/A/griffin-mini-displayport-to-hdmi-wit h-audio-dvi?
    Finally OS X has been available for well over a decade. Please look at About this Mac (click the Apple symbol in the upper left corner of the display. Then look to see what version of OS X is installed.

  • IOS5.0.1 does not fix the most important bug!

    When I upgrade to iOS4 ios5 and even now with the ios5.0.1, every time I enable airplane mode, it does not recognize my phone chip. When Apple will solve this problem?

    Please, consider this script, disregard the old.
    When I upgraded from iOS4 to ios5 and even now with the ios5.1, every time I enable airplane mode or lost of signal occur, it does not recognize my phone chip. When Apple will solve this problem?

  • Type 2 SCD -- does not update the old value.

    I have following columns in the source table:
    SSN, credit_score
    In the target, I have following columns,
    SK_ID, SSN, credit_score, flag
    I am flagging the old credit_score as 'N' when updating the row and at the same time it is supposed to enter a new credit score with flag 'Y' in another row.
    Second, If a row is completely new, It should be inserted with the flag 'Y'.
    SK_ID is the surrogate key and SSN is the natural key, My trigger column is credit_score.
    The problem is that when I run this type 2 mapping, it does not update anything but inserts the new rows only.
    I have posted the screen shots at the following link.
    http://www.box.net/shared/ea9v48r0xa
    Thanks for your help in advance.

    First of all, thanks for the reply...
    You can also look at the screen shots I posted in previous post.
    Here is how I am updating the rows (update logic).
    If source_SSN=target_SSN and source_credit_score!=target_credit_score
    then flag = 'N' (this is the update from 'Y' to 'N' after which i will insert a new row containing new value of credit_score with flag 'Y')
    As an example, if my old rows in the target table were:
    sk_id SSN credit_score flag
    101 2212 654 Y
    102 3023 707 Y
    Now let's say my source table has these values.
    SSN credit_score
    2212 648
    2220 690
    Then my target table should be like this:
    sk_id SSN credit_score flag
    101 2212 654 N
    103 2212 648 Y
    102 3023 707 Y
    104 2220 690 Y
    Do you see what I mean...

Maybe you are looking for