HT5022 How do i access the firewall settings of my airport extreme?

i cant find it when i hit edit airport extreme? I really need help

The NAT firewall is either "on" or "off".
Open AirPort Utility, click the AirPort icon, then click Edit
Click the Network tab at the top of the screen
Look at the setting for Router Mode
If Router Mode is set to DHCP and NAT, then the NAT firewall is automatically enabled.
If Router Mode is set to Off (Bridge Mode), then the NAT firewall is not enabled.

Similar Messages

How do I access the firewall in Airport Extreme?

Hello, this may be a very stupid question, but how do I access the firewall in my brand new Airport Extreme? According to the Apple specifications, it contains a built-in firewall, yet I cannot find any mention of this when using Airport Utility to set up the Extreme.
I am using the Extreme connected directly to a modem on the UK BT Infinity fibre optic broadband system using PPoE. The modem is not a combined modem/router, it is a modem only, hence using the Extreme to set up my network, which I have to say (apart from this one question) was incredibly easy. The wireless system is protected as WPA2 Personal.
Router mode is "DHCP and NAT" and "Enable NAT port mapping protocol" is ticked as on - is that it? Is that all I have do to have the firewall on? Should I also have "Enable Default Host" ticked as well? Apologies if this is a silly question - I do not understand firewall set-ups.
I am using 10.7.3 Lion on my MacBook Pro and have a Mac Mini on Snow Leopard connected to the Extreme, plus the usual assortment of iPads, iPhones, Apple TV and iPod Touch.

I don't use this setting, so can't offer much assistance, but do know that your computer is exposed to the Internet, so it will receive all inbound traffic.
Normally, a typical use of Default Host would be to setup a game console to allow online gaming when NAT settings otherwise would not allow communications to occur.
You might want to start a new post for your question...but to get informed responses....you will need to state what you are trying to do. what steps you have performed, etc.

How can you access the printer settings in CS5 when using Epson 4900?

How can you access the printer settings when using Epson 4900 with CS5 12.1 x 64

Open the print dialog box, click "print settings".

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

How do I access my hard drive connected to airport extreme?

I've already imported video to my hard drive. I had it previously connected via firewire. It's there in an imovie 08. However, when I open up imovie in the "Event Library" panel, my hard drive has a yellow triangle with an exclamation point on it. Does anyone know how I can access this?
Do I have to choose "import" first and then copy the movie back into imovie? I think this would defeat the purpose of storing the footage on the external drive, right? I'm trying to make my first movie, so please be gentle if this is an easy question to answer. It's throwing me for a loop right now.
Thanks again!

sorry, the hard drive is connected via USB to my airport extreme. Here's how i can look at the files:
Macintosh HD, under "shared" i select my hard drive, open it and then click on imovie events, then i can access the 19 different folders which contain multiple clips in each folder, along with an imovie thumbs file etc.
However, in imovie when create a new project, then click on import, it will ask me where i want to save the files, and on the drop down arrow, the only choice is my macintosh HD and I can't choose anything else. I really don't want to save them to my computer's hard drive if i don't have to. It seems there should be an easier way to do this, but i'm overlooking something. I just want to be able to make a movie with the clips that are already saved on my hard drive which is connected via airport extreme. Thanks again!

How can i access my hdd hooked to my airport extreme base station at home, from another place,office,school..?

i have an airport extreme base station ,i conneted a hdd and i want to acces the hdd with my macbook from another place ...office...school....

I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device.

How do I share the external drive attached to airport extreme with an iPad?

The subject line says it all.

What model external HD?"
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

How can i see the hdd, attached to my airport extreme, on the internet?

I have an Airport Extreme installed with a HDD attached.
I can see the disk and manipulate files when logged in at home.
I want to use it as a storage for current files (and more) which I need every day.
How can I make this visible over the internet and reach it from other places?

In the 5.6 utility you should be able to see everything via the advanced pages.
It will not log the name so you will need to work out from your Mac which user corresponds to which MAC address.

HT5022 How do I change my "password" for using an Airport Extreme 802.11n Wi-Fi base station?

My Kindle Fire asked for a password for my Airport Extreme 802.11 Wi-Fi. The password used on other devices using the Airport Extreme does not seem to work and Apple Support is not willing to help unless a service charge is made. How do I change my password or find out what the password is?

I am assuming that you are referring to the AirPort's wireless security password and not its base station Administrator's password ... correct?
If so, there are number of methods of resetting a password if you don't remember what it is. Please check out the following AirPort User Tip for additional details.

How do you update the firmware on 1st Gen Airport Extreme in OSX Mountain Lion?

A friend gave me a old but never used 1st Gen Airport Extreme 802.11n WiFi Wireless Base Station. I have a couple WiFi dead zones in my house and was told that I could daisy chain the Apple Airport Extreme off of my Verizon FIOS router/modem (802.11G) to fill in the dead spots. During set up the Airport Utility told me that "This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Go to AirPort Service and Support (link) for more information.
I updated the Airport Utility to the latest version (6.2) and I am still getting the same error message and no other option to update it's firmware. Anyone know of a work around or am I fighting to losing battle here. I tried to contact Apple support, but when I entered the serial number for the Base Station it said the product was over 5 years old and didn't qualify for support service program.

was told that I could daisy chain the Apple Airport Extreme off of my Verizon FIOS router/modem (802.11G) to fill in the dead spots
Not sure what you mean by "daisy chain". The AirPort Extreme cannot "repeat" or "extend" the wireless signal from the FIOS router if you are planning to do this using wireless only.
You always need at least 2 Apple routers to be able to "extend a wireless network" using wireless only. The Apple routers would not be compatible with FIOS routers for this type of purpose.
If you can connect the AirPort Extreme to the FIOS router using a permanent wired Ethernet cable connection, then the AirPOrt could be configured to provide more wireless signal coverage that way. If you cannot run the cable, it might be possible to use a pair of Ethernet powerline adapters to send a signal over the existing AC power lines in your home.
When you open AirPort Utility 6.x and a firmware update is available, there is usually a red number next to the AirPort Exreme icon. Click on the red number......or if it does not appear, click on the AirPort Extreme icon and then hold down the option key on a Mac as you click on the Version number that is is displayed to see more "options".

How to change the firewall settings to provide remorte access to oracle 10g

dear all
I have created the oracle 10g database and it is working properly...but I cant loging with thedata base remotely when the host's firewall is on..when it is off I can connect with the database remotely..how can I change the firewall settings in this case

You need to configure your firewall to allow traffic on the ports listed in ORACLE_HOME\install\portlist.ini.
You do not need to allow all of the ports, just the ports you want to allow traffic. For example if you are not using iSQL Plus you do not have to open port 5560 or the range 5560–5579.
You can find a description of the ports at the following link.
http://download-east.oracle.com/docs/cd/B19306_01/install.102/b14316/ports.htm#CIHECDEE

I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info?

I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info? All computers are using Yosemite 10.10.1 and are new 13" MacBook Pros.

Hi wmcknigh,
Welcome to Apple Support Communities.
The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
If you don't see your family's shared content - Apple Support
Cheers,
-Jason

How can I access the settings for this program.

How do I access the setting for Adobe Flash player?
I keep getting a box which asks me to allow or not allow additional storage space, but when I click either box nothing happens.
When this program was installed it never provided me with a setting screen - so how can I access this information.

http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l
Or use the Flash Player Settings Manager.

How can I access the Home Sharing Library from my iPad?

We have an ipad 2 with ios 7, and an imac with itunes 11.1.3
Just heard about home sharing and want to use this - surprised we haven't heard of it before
home sharing is turned on in itunes (file > home sharing).
home sharing is on for the ipad (settings > music)
They are both connected to the same wifi network (usually our computer doesnt use wifi and is wired, but we turned wifi on just for this)
When I open music in the ipad (even after continually quitting and reopening the app) there is no 'more' button in the bottom right that there is supposed to be.
What is wrong? How do I access the library from the ipad? Help please!

Welcome to the Apple community.
More does more than home sharing, so it's odd that it isn't there, even if home sharing wasn't working for some reason. Are you sure you are in the music app and not the iTunes App.

HT5022 How do i access the firewall settings of my airport extreme?

Similar Messages

Maybe you are looking for